How To Install 04.5-10 Duramax Fuel Injectors
Ойын-сауық
Click and buy to be entered for the Turbo giveaway 👉 truckmasterdiesel.com
Mitchell’s Cummins @1045cummins Instagram
sales@bitterrootdiesel.com coupon code truckmaster
Bitterrootdiesel.com
417 Wolfville Ln Unit E
Florence, MT 59833
406-852-2167
Kodiak Truck and Trailer Sales
100 Oakridge Dr
North Prairie, WI
262-370-8300
👉 kodiaktruck.com coupon code truckmaster save 5%
Anthem Wheels! www.anthemwheels.com/?ambassa...
www.hspdiesel.com
Coupon code: “truckmaster”
Ryan’s Diesel Service www.ryansdieselservice.com 5%off turbo’s coupon code👉 truckmaster
Kodiak Truck North Prairie, WI 👉 kodiaktruck.com coupon code truckmaster save 5%
Instagram @truck_master07
Channels to check out:
Rustbelt Mechanic (bed lined paint job)
/ @rustbeltmechanic
Bertrand850 Duramax on 40’s 👉 / bigstallion80
Duramax_diesel
/ @resurrecteddiesel
JW Montoya / @jwmontoya
Mods done to the Truck!
EFI Live DSP5 Switch Idaho Rob
WCFAB Stage 2 Air Intake Kit
60% Bitterroot Diesel Injectors
68mm Street Turbo Ryan’s Diesel Service
WCFAB YBridge
WCFAB Hot Side intercooler pipe
FASS Titanium 150GPH Lift Pump
FASS Fuel Sump Kit
MBRP 3inch Turbo Down pipe
Cat/muffler delete
PPE Race fuel valve
Ported fuel fitting
Transgo Jr Shift Kit
Resonator Delete
Egr Delete
Egr Cooler delete
Sinister Cat Fuel Adapter
Kodiak Truck Transfer Case
Kodiak Truck True Trac Rear end
PVC Reroute
PPE Stage 5 Built Transmission
Zone off-road upper control arms
PPE Stage 3 HD Tie Rods
6" Pro-comp suspension lift kit
5100 Bilstien Shocks
35/12.50/R20's
20x12 Vision Prowlers -51 offset
Trail Ready Front Bumper
Music by: suncloud
Boostautoparts 👉 boostautoparts.com/products/f...
Пікірлер: 284
Man I love your channel. Just moved from a 6.0 to LMM Sierra. I've learned so much in the last few days binge-watching all of your videos. Thank you for all that you do!
You just saved me a lot of money i did my swap on the side of the road and didn't have to have it towed to a shop thank you so much for taking the time to make this video
@cameronmanly2441
2 жыл бұрын
About to do mine today thanks to him as well, you just gave me confidence if you did it on side of the road lol
Your videos have taught me so much. You are a great teacher and have inspired me to do all of my own upgrades on my 06 Duramax. Thanks for your help!!
As my mentor Mexican always said "clean it up very good, rapido, quiet, and be careful". Best advice I was ever given
I don't think you gonna see this comment but I did my injectors on lly duramax thank for the video 💯
@TruckMaster
3 жыл бұрын
Thanks 👍
@jevonjc4631
2 жыл бұрын
Did you have too program them after ?
Stoked Bitterroot Diesel is just down the way from my house. About 15 min away. Definitely going with them when it’s time.
Good mention on the copper washers! Someone did the injectors on my truck and had 2 in there!! Leaking coolant since day one.
@TruckMaster
4 жыл бұрын
No way
@phillipkrol3338
4 жыл бұрын
@@TruckMaster yeah lol unfortunately. I put 100,000 miles on them. Another one didn't even have one in it! Glad I had it done right with a shop after that. Never smoked or hazed always started right up. Balance rates were good you just had to add coolant after 3 or 4 months.
About to turn 78,000 on my 07 LBZ classic. Hopefully don’t have to do this for a while but will be watching this someday when I do
Great video bro. Thanks for sharing your knowledge man. Helps the rest of the diesel community.
@TruckMaster
3 жыл бұрын
Anytime 👍
I’ve been waiting for this, let’s get this going.
@TruckMaster
4 жыл бұрын
👍👍👍
Having a LB7 and watching this makes me so jealous... Yes I did my own injectors. Hopefully not for a long losing time to come
@tt7hvn
4 жыл бұрын
I'm right there with you dude. I've done my injectors twice. The first time I paid someone to do them. The second time I did them myself and realized how much the guys I paid to do them didn't do. They literally only replaced the injectors and nothing else. Hence why I had to do my injectors again 70k miles later.
@jantzenmoore2250
4 жыл бұрын
Same here bud this looks soooooooo easy! The lb7 has to many things that could go wrong to cause you to pull the valve covers again.
Dude where did you learn all of this I know it’s an old video but you have taught me plethoras of duramax information and inspired me.
Awesome video man!! really love the attention to detail it was very enjoyable to watch 🤙
@TruckMaster
4 жыл бұрын
Thanks
Great video my man always informative keep up the fantastic job we appreciate it.
@TruckMaster
4 жыл бұрын
Thanks Victor 👍
Great install video buddy! Glad I could help out with the programming🤘🏻
@deakongolla3838
4 жыл бұрын
Is the best flow or balance rate code a higher number or lower number. I'm new to diesels any help or advice would be helpful. Thank you
@jasonsulzbach782
3 жыл бұрын
Would you still have to calibrate and do the coding on a new/reman stock injector?
@horacewilley8728
3 жыл бұрын
How long did you have to wait for your injectors from Bitterroot??
@RustbeltMechanic
3 жыл бұрын
@@horacewilley8728 after they received them, it was 2-3 weeks I believe in turnaround time
That's awesome man !!! Good for you, this truck has came a long way in the past year for sure its awesome to see the truck progress to were it's at now ! Keep it coming man !!!
@TruckMaster
4 жыл бұрын
Thanks Jake
Going to be doing this soon. Thanks!
if u have the filter delete kit on there why not just bypass the housing all together ur lift pump will take care of the priming and u could use the shrader valve to bleed the air out
Great informative demonstration man !!! I wanna do how to videos but just don’t have the patience lol
@TruckMaster
4 жыл бұрын
thanks 🙏 It took me along time to get used to
Leave it to TruckMaster, best and only injector video with details on injector replacement for LBZ! Thanks Josh!
@TruckMaster
4 жыл бұрын
I really appreciate that
Awesome video bud!! I’m a do it your selfer like most of you that I fallow and I gotta say, all of the content helps TREMENDOUSLY!!! Thanks again. 👍🏻
Awesome vid Made this job look easy I thought it was more complicated but not that bad lol
Why you always make things look easy?? Great work, once again!!
@TruckMaster
4 жыл бұрын
Thanks I appreciate it. Video editing always makes everything look simple I guess
@scoterplow50
4 жыл бұрын
Jack Chang because he has all the right tools to do the yob with
@TruckMaster
4 жыл бұрын
That’s true as well
@Speedstack21
4 жыл бұрын
@@TruckMaster To make us feel better, can you give us a blooper reel where a part gave you a hard time and you got frustrated? I can't even get through an oil change without dropping an F bomb about something that isn't going smoothly...
Your lucky the injectors came out so easy! Who is doing the tune ? Love your channel! God Bless!!
You're have a great holiday starting now!!! What's the time frame on completion of the tune?
Don’t own a duramax but currently stuck at home because of the “VID” 😂 so I’m going through and rewatching all your videos. Love to see a fellow Michigander succeed! Did have a question though if you see this. What would you have to do if you pulled out an injector and the copper washer didn’t come out with the injector?
I'm very interested who you choose for tuning. I have Starlite trans safe tuning on my truck an love it.
Love watching the videos, very informative. Curious to how those😂 injectors are doing for you?
Great video!! Im about to install my Hsp compound kit, I need retuning also!!
@TruckMaster
4 жыл бұрын
CTT Tuning
@shanekray1980
4 жыл бұрын
Thanks I’ll check them out!
After I make more money that’s one of the things I wanna take care of . So where did ya get that massive steel front bumper? Keep on rocking !
Good work Jason!!!!!!!!!!!
nice job on those injectors!!
@TruckMaster
4 жыл бұрын
Thanks 🙏
Way better than my old LB7
After your intercooled piping what did you do to your oil dipstick? Mine is out in the open and doesn’t have a place to bolt down on the top 🤷🏼♂️ clean no frills video 👍🏻
Holy cow this looks so much easier than doing my lb7 injectors lol
Best on KZread, makes me feel like I could do this lol
@TruckMaster
4 жыл бұрын
You got this
@nick7.398
4 жыл бұрын
Truck Master thanks, don’t even have a duramax I have a 7.3 but am thinking of buying a lb7 that needs injectors and fixing it to get a cheap duramax
I've always understood you need to see your fuel flow rate and figure out the injection balance rates based upon the actual for rate to figure an accurate injector balance rate. Is that true?
You probably already have a partner for a tune but check out punisher. My buddy has been running them for years in his 375k mike LBZ sled truck. Awesome install!
@TruckMaster
4 жыл бұрын
Thanks for the info
Could you please do a video dedicated to the different Duramax injector removal tools, preferably made in USA. I'm having a heck of a time finding one with good reviews. Thank you in advance.
This is the reason why I prefer straight six, more room to work.
Well done video. Couple of questions... How many miles are on the engine/old injectors ? Those were in bad shape. Do you occasionally run an injector cleaner through your fuel ? There are some good fuel additives for diesel on the market. Additionally what is the cost for a full set of injectors, and out of curiosity, what would the labor rate / cost to have a shop do this... such as your friends shop , Ryan's ? Kinda gives an idea of overall cost ... How many miles should you get out of these new injectors ? Being 60 over, what of fuel mileage are getting [mpg] out of your truck ? When are you going to do some interior work on the truck ? Don't the large offset of those wheels stress your wheel bearings , spindles... etc. ? How well do those low profile wide tires get around in the snow ? Ok that's all.
Your gonna have to repeat this procedure again when you get the head studs installed. 😂 ac/deacon silicon lubricant/pace works better then motor oil on seals.
Im in the process of buy a 06 LBZ right now
Great video 💥💥 Great channel 💥💥
@TruckMaster
4 жыл бұрын
Thanks 🙏
So... how are those metal fittings doing so far? 🤣 nice video 👍🏼
What universal adapter were you using with the small 3/8" drive impact?
dame that's a beautiful beast
Good show as usual truck master. Keep up the good work
@TruckMaster
4 жыл бұрын
Thanks 👍👍👍
Truck Master Josh, I have an 05 LLY. It has 108,000 miles on it. Recently got limp mode on it and got a diagnostic reading of a PO201 code saying Cylinder 1 issue. I took the injector wire connector off and it looked perfect as did the wires themselves all the way back to the harness. The injector itself wasn't wet with fuel, but it did look a little darker around it than the others on that same side. With everything already removed, fuel lines etc.. I don't know if I can test the wiring harness connector to see if its getting the true voltage without starting the truck? Yes /No? Also, can I just change out that one injector with a stock remanufactured without going through the injector reprogramming? Thankyou Sir,
Thanks
I bought bitterroot injectors for my obs 7.3
can you reprogram your injector balance rates using EFI live? or do you need a tech 2?
Do you need a tune if you put in stock injector replacement on LLY
What is the best tech 2 to buy? I want to get one but want it to be the right one or the best of them.
You should put a 7inch exuast tip
Have you ended up getting a tune for those new injectors yet?
How long did this take looking to do mine soon and wanna plan to give myself extra time if needed
What kind of internals do you have buddy? I just had a engine built and was wondering what I should be expecting from a mostly stock internal engine. My last stock blew up with a simple tune from anarchy diesel.
Hey I’m having trouble looking for return lines and the meter fittings can you buy them at a parts store?
What if you have an injector that has a high balance rate for one injector, believing they are stock, can you use the same procedure to recode the injector in question or should you replace the injector? Also, how do you get a Tech 2 and know that you have all the necessary licenses/subscriptions? Thanks and have a blessed day!
wow. how long did that take you?
Did you end up changing your fuel filters after installing the injectors?
What can one use as a flat rate replacing the injectors on the passenger side on this?
I have an open circuit on injector one. I try wiggling the harness to cause the knocking but it usually happens when it wants or when I press on the pedal. Any insight on what I can do?
Do you have the link to the return lines?
finally injectors on a LBZ, just great video, so 2 things, I'm trying to find out if I need to replace mine and using my Diesel Evolution CTS2 CA Edition ( yes CA) I can get the balance rates but there a lot of versions about what they mean and what you have to add/ subtract, multiply/divide to actual meaningful numbers , if you have any suggestion let me know, next I assume that even when staying with stock injectors they will need to be reprogrammed , what are the option there Again thanks for the video
@bitterrootdieselperformanc6945
4 жыл бұрын
Balance rates show how the PCM is commanding the injectors in an attempt to have equal cylinder contributing throughout the engine. It's not always perfect data, but it's usually very helpful in determining injector health. Our injector testing service would provide the most accurate data on injector health. All LBZ trucks will need the injector trim codes updated when changing injectors as the PCM is used to balance them from the factory.
Injectors just installed in my LBZ. Programmed the inj, I used the codes that came with the inj. All but #6 are around .5, but #6 is 2.7. The truck no longer smokes, and power has returned, but my fuel mileage is horrible. Do I need to take the best return rate and paste that on the remaining 7 injectors? I think it might just be a bum #6 injector. Like Ryan said, the inj swap fixed my P0087 low rail psi limp mode issues, even though my return rates were low, and the highs were only 1.5 and 2.0.
Hey so I’m wondering about the smaller O ring on the injectors? You have the main ones that come with the injectors but if you buy a O ring kit it comes with the main O rings it comes with smaller O rings the clips for the fuel lines on the injectors and the copper rings as well.. but noticed you didn’t use the smaller O rings?
Will the truck start without coding the new injectors first? I don’t have a tech2 was wondering if I need to buy one lol
So I got to program my new injection
Where can I purchase the return line with metal fittings?
hey truck master I know it’s an old video, but I just recently broke an injector hold down bolt, it’s showing quite a bit now that the valve covers are off, any tips or ideas on what to do? Thanks.
About to do 30 overs on my lmm. About how longs it take to do them all?
I want to put bigger injectors in but I would need a tune could I install them and then get it tuned or should I just get a shop to install and tune jt
Dang those things are huge ...
I have a 2013 Silverado 6.6 duramax crank no start.
Is this needed to be done if you send off your injectors to be rebuilt?
Replaced the motor on my LMM. Didn’t replace the injectors with my originals. How do I get the truck to recognize these injectors so I stop getting a miscommunication codes on all 8 cylinders?
How were you able to clean the injector bores without introducing junk into the cylinders.
Can you use HPtuners to do the injector balance?
Are you on stock cp3 just did a cp3 conversation on my lml and don’t know what injectors to go with for the thinking 30 overs
I'm looking at a 07 LMM with 185k on the clock. Trying to get a balance reading before purchasing. In your application was an injector showing a bad balance or do you just replace at a certain age/milage
calidad gracias
Are your wheels behind you in your outro for sale ?
Is the fuel pump a nightmare to change? Diesel they built in the intake
Any tricks to get stuck injectors out? 2005 and we have 2 that will not come out, we've sprayed everything known to man with zero luck
Hey bro great video! Question, if I already have the ppei tune, and about to install 30 over 75hp injectors, will i need to re tune,. Im also throwing in a new street turbo. Any info will help. Thank you
@bitterrootdieselperformanc6945
2 жыл бұрын
Yes, the tune should match the injector size.
did you drain the coolant? i see they do that on LB7s
What happens if I installed 75 HP bigger injectors then what it's tuned for?
Is there no pressure in the lines?
I was wanting to see how you broke the fuel line nuts loose. I cant get mine to budge.
About how long they take to change brother?
You remind me of Sargent Carter off gomer Pyle U.S.M.C
no EGR cooler?
Just did the drivers side on a lly and hoooooly. Guys do yourself a favour and buy some crows feet 17mm. I cut a wrench and went it and daaaaamnn was it not fun clearance wise. All good now though! Lol
If I replace 1 single injector does it still need to be programmed?
Lucky you didnt snap any hold down bolts!
What swivel do you have on your drill at 1:50?
Like some others .. I’m am the newbie with 05 Chevy HD Duramax so my question is my truck is all stock and I plan on just for starters getting Rims but the next thing I was going to do a lift pump so I’m looking at air dog but the injectorsHow do you know what injectors to put back in the truck power wires do you go back to stock do you go to the next step higher for power etc. etc. thank you
@bitterrootdieselperformanc6945
4 жыл бұрын
30% larger injectors are the most popular since supporting mods are usually not needed and it's a great daily driver/tow size. Usually 75HP gain.
Good gracias nais