How To Inflate And Finish A Foil Balloon
Ойын-сауық
With inflated helium costs (see what we did there?), the last thing you need is a foil balloon losing helium. Craig shows you the proper way to inflate a foil balloon and how to tie a ribbon on the tab to avoid damaging the balloon valve. This also allows you to reinflate the balloon if needed. Easy peezy!
Loftus is a full-line distributor for Anagram, Betallic, Betallatex, and Pioneer Balloons. That means you have access to thousands of balloon designs. Seriously...THOUSANDS!
Many, many thanks to our local grocery market for allowing us to demonstrate this design in their store!
Contact your Sales representative at Loftus to place your order.
Loftus International is a wholesale-only business. To see prices or order products, contact our Sales team to get your business set up in our system.
We do not sell retail.
www.loftus.com
800-453-4879
Пікірлер: 60
Thanks For That Tip "If It Doesn't Hold The Balloon Down It Isn't A Balloon Weight!
Nice video, very concrete, thank you
Thank you!!!
Thank you! So fast and to the point with plenty of info so I can learn and get back to my 7 year old's party!
@andrewchapman7204
Жыл бұрын
Shut up
@shinakohana
Жыл бұрын
@@andrewchapman7204 lmfao Um... what...?
@andrewchapman7204
Жыл бұрын
@@shinakohana dawg I’m joking
@shinakohana
Жыл бұрын
@@andrewchapman7204 Haha. Okay. Hard to tell with text! Hahaha
thank you.. i want to go to your shop. it's like a place full of joy 😄❤️
@LoftusInternational
3 жыл бұрын
Thank you for your comment! We certainly have some fun around here!
Thank you!
@LoftusInternational
Жыл бұрын
You're most welcome, Kimberly!
So my foil helium balloon has been floating in my bedroom for over 4 months what’s the world record for that ?
@LoftusInternational
Жыл бұрын
From what I can find from our manufacturers, it's typically about 2-4 weeks, so YOU, my friend, are well on your way to breaking the record! :-)
@summerrr1
3 ай бұрын
I just got to 9 weeks and was certain I had broken the record 😢
Oke... 👍 Thank you for the tutorial... 🙏 Is very usefull 😍
@LoftusInternational
3 жыл бұрын
You're very welcome!
I've bought foil balloons online that seem to be sealed and it's hard to get the valve through. Does a good quality foil balloon seal itself when blown
@LoftusInternational
Жыл бұрын
Hi Ileana, couple of things you can try - on the valve, there may be a plastic flap you need to get under to inflate. Some of our balloons have that. Another thing, when you fill the balloon and remove the inflator, make sure the valve is flat. Tie any ribbons below the valve as well. Here is a link to watch Craig flatten out the valve so you can see what I'm talking about: kzread.info/dash/bejne/qpamzpibeZqfgdo.html
What if balloon has no slot in it ?
I dont have that kind machine so how we can do it at home?😕
@LoftusInternational
2 жыл бұрын
Hi there! You can as for a "hand held air inflator" at a party store. It pumps air into foil or latex balloons and is perfect for a home party. It will only use air, so of course it won't float, but most large foil balloons come with hanging tabs now. You can use ribbon or monofilament line (fishing line) to hang the balloons. By using air, you'll also save yourself some $! Here is a link to see what they look like. www.loftus.com/pages/tyingballoonshandpumps We are a wholesale only distributor, so you'll have to check your local stores to purchase a hand held air inflator.
The videos are so fun
@LoftusInternational
Жыл бұрын
Thanks, Brodie!!
@brodiesammis3116
Жыл бұрын
@@LoftusInternational your welcome your work is Awesome and it’s so amazing keep making more videos
@brodiesammis3116
Жыл бұрын
@@LoftusInternational your welcome the videos really inspired me
Why did it go down if you blow up
@LoftusInternational
Жыл бұрын
There is a valve on the balloon that allows helium or air inside, and then it stops the helium or air from leaking. If the valve is damaged or if you tie a ribbon around the valve area, the helium or air will slowly leak out. It might also be a small leak in the seams of the balloons as well. If you smooth out the valve and tie where it shows the dotted line, you have done everything you can to keep that helium or air inside the balloon. Hope that helps!
@DjTheDogAnimate
Жыл бұрын
@@LoftusInternational Thx
I occasionally have to fill foil balloons at my job. Do all valves automatically stop so you won't overfill? I'm so scared of popping a balloon!
@LoftusInternational
2 жыл бұрын
Hi Kuduk, if you use a Foil Regulator (like the one in the video), it will automatically stop once the balloon is full. If you don't have this kind of regulator, you're going to have to watch it. Typically once the balloon is full, you'll see a lot of the wrinkles disappear along the seams. Hope that helps!
@Beanz572
Жыл бұрын
This helped me a bunch as well because I from time to time am called on to inflate foil balloons. Thanks!
@KudukUngol
Жыл бұрын
@@LoftusInternational So almost a year later and I've blown up more balloons than I can count. Our tank must have a foil regulator, because I purposely tried to pop one but couldn't. But I've learned just by feel and sound when the balloon is full. Ironically I actually don't blow up balloons much anymore because we're always out of helium! Thanks so much for this video and your response; it really helped ease my fears. 😀
@LoftusInternational
Жыл бұрын
@@KudukUngol Oh good! Happy to help! Yes, the helium supply is rough right now. Have you checkout out our air-filled design videos? You can get a lot of easy designs made with all air-filled balloons. Thanks for your comment!
@LoftusInternational
Жыл бұрын
@@Beanz572 Our pleasure, 7Deuce!
So... when you filled it how did you close the hole of where you filled it from? sorry first timer and i have a dog snoring in my ear 🥴😂
@LoftusInternational
3 жыл бұрын
Hi Hanna! On all foil balloons, there's a valve that will automatically close when you remove the balloon from the inflator. That's why it's important to tie the balloon where indicated like Craig shows. This way, the valve doesn't get crimped or damaged, and if the balloon naturally loses helium (if it's been up for a while), you can reinflate the balloon using the same hole. It's a trade secret - don't tell anyone! :-) Hopefully your puppy had some sweet dreams!
@hannalouise9993
3 жыл бұрын
@@LoftusInternational amazing advice! thank you so much!! xxx
@eunicemancinas
Жыл бұрын
@@LoftusInternational thank you for things info, I always wondered and pooped them thinking they were for one time use 😂😢🤦🏻♀️
Hello friend, I am from Ecuador, I need to import shape foil balloon 18 inch
@LoftusInternational
4 жыл бұрын
Hi There! I think we've already chatted on Facebook, but just in case, please send an email to info@loftus.com and we'll be in touch!
The best i have seen.🔥🔥🔥🔥🔥🔥🔥
@LoftusInternational
2 жыл бұрын
Wow! Thank you!!!
How much should a store charge their customer if they want to refill their balloon. What is the best price for a helium refill in a grocery store
@LoftusInternational
4 жыл бұрын
Hi Charlie! Here's what Craig said: "Grocery stores in our regional area are charging the same as if they bought the balloon from them, and they cannot guarantee that they will float or be defective free. If the original purchase was in your store, I may give them a break. I would keystone the price of your helium in that case." Does that help with your question?
@christiangray214
4 жыл бұрын
☺
Can you do a tutorial on how you tied it like there? I couldn't see it well because you somehow blocked the view.
@LoftusInternational
2 жыл бұрын
Hi Carlos - I think you're talking about how he ties it at 1:43, correct? He tied the ribbon like he was going to knot it on itself, put the loop around the tab of the balloon, then pulled tight. I'll ask Craig to show us up close how to do that next week and upload the video. Thanks!
@carloso5910official
2 жыл бұрын
@@LoftusInternational OK
@carloso5910official
2 жыл бұрын
@@LoftusInternational Is the video ready, or when?
@LoftusInternational
2 жыл бұрын
@@carloso5910official Video up and ready! kzread.info/dash/bejne/X6tk1bd7f7u9n7Q.html
How does the nozzle now the balloon is full
@LoftusInternational
3 жыл бұрын
Hi Michael, I'm sorry, I don't understand your question. Are you asking how the nozzle knows to stop filling once the balloon is full?
@sharkybro211yeye9
3 жыл бұрын
Yes
@sharkybro211yeye9
3 жыл бұрын
Yes I just don’t understand
@LoftusInternational
3 жыл бұрын
@@sharkybro211yeye9 Michael, I'm waiting for our Balloon Guru to get back to me with an answer - he's such a busy guy! I'll respond as soon as I hear back from him. I know the regulator measures the "back pressure" but he may have a better explanation of how it works. I'll be in touch!
Merry merry Christmas 🎄 mama
I needed helium? 😅
Po
I’m