VERY HELPFUL Well edited. THANK YOU

@YepThatsIt

9 ай бұрын

thanks & cheers

Good job.. thank you

@YepThatsIt

2 ай бұрын

hi, no worries. thanks and cheers

I really thankyou for your time doing this.

@YepThatsIt

Жыл бұрын

glad if helped, cheers for beers. link is in description

Was needing to know if you had to reprogram it or reset anything after doing this I have a 06 Kia Spectra that I'm going to be doing the valve body on soon.

Hola, esa es la caja del mismo Chery..... gracias

@YepThatsIt

4 ай бұрын

gracias y saludos

Is it possible to get only the selector in this valve body? Mine broke. Oit here in Africa Namibia. Can't find a spare selector. Agent charging me N$ 33000 For a new complete valve body

Excelent video very well explained, and thanks for share in video all the steps.

@YepThatsIt

2 ай бұрын

hi, no worries. cheers

@YepThatsIt

2 ай бұрын

hi, no worries, thanks & cheers

Great explanation and video, top marks bud. Greetings from blighty...

@YepThatsIt

2 ай бұрын

hi, glad if it helped! few beers are always appreciated. link is in description. cheers

This video is absolutely amazing. I’ve currently pulled my auto box apart and separated the 2 parts of the valve body. But 2 ball bearings had come out and I’ve no idea where from. Suggestions?

@YepThatsIt

2 ай бұрын

hi, look for wear witness marks. cheers

Hey I've been following you and I love how you explain everything so clearly and with such attention to detail. Truth is I own a 2011 i30 that was not working when I bought it.. wrong ECU.. long short I'm not getting reverse properly.. i have to rev to 1500 - 2000 rpm then it would move but it has very little power.ive pulled out the transmission and checked everything..put it back in.. I just changed the range sensor but still no luck.. I'm not getting a CEL but when I scanned I got a u0100 code..I just need some guidance..its been 2 yrs now

@YepThatsIt

Жыл бұрын

hi, thanks...you may need to do line/pressure tests to see if you are getting correct pressures to clutches. you can also do an air pressure test when you remove valve body. some components like pump or worn valves can cause issues like you describe. and then it depends on what you did and didnt replace when you had it apart. we`ve found many ( even mechanics ) believe a trans rebuild is just seals/gaskets/clutches/rings , many forget to check bushings and housings for wear and pressure leaks. cheers

What is the program on your laptop please

I recently took mine out to switch solenoids and the car ran great for 3 days but all of the sudden yesterday we got back in the car went to leave the store and its not recognizing any gears...??? The shifter will move into each gear but the car doesn't go anywhere when you push the gas..... What did i do wrong???

@YepThatsIt

2 жыл бұрын

hi, you will need to recheck your work, make sure you check easiest basics forst then work your way up. good luck cheers

Brilliant as usual. 👌👍

@YepThatsIt

2 жыл бұрын

cheers mate 👍

thank you so much am working on a 2011 kia soul transmission valve body and i needed to know how those 4 sets of spring goes in the one am working on i think 2 of them carrys a big spring with a small one in the middle but il will watch the video again to get it right it was a pleasure watch your video

@YepThatsIt

2 жыл бұрын

hi, the accum on its own has 2 springs, and the middle one has 2 springs, although i`m not sure if they have different tensions? we usually put back the same way we find them. cheers

@gustavomurguia2004

2 жыл бұрын

Friend, excuse me, what accommodation did you give the springs? I'm worried because I can't assemble the

What is the arrangement of the springs with the yellow base, when removing the valve box they fell and I did not see their place. Help please as I can not assemble the box

@YepThatsIt

2 жыл бұрын

hi, best get a workshop manual and you will need specific coil heights and diameter measurements of springs. cheers

@mwhodatboi

4 ай бұрын

Hi i have the same problem on a 2014 kia picanto. Did you manage to find the documentation?

Did you have to reprogram it?

Buen dia, mi hyundai elantra 2008 marco codigo de falla P0743 solenoide tcc o numero de parte defectuoso: "tsc128" que es el de torque me dicen, aqui mi falla es al llegar a un alto sale con poca fuerza y no cambia a segunda parece que solo avanza con la primer velocidad no entran los demas cambios, con la computadora conectada y manejando ese selenoide daba valor de 0, y el aceite esta sucio, puedo cambiar el cuerpo de selenoides completo y el aceite y filtro?

@jaimelopez4526

10 ай бұрын

Good morning, my hyundai elantra 2008 frame fault code P0743 tcc solenoid or defective part number: "tsc128" which is the torque one they tell me, here my fault is when reaching a stop it comes out with little force and does not shift into second gear it seems It only advances with the first gear, the other changes do not come in, with the computer connected and operating that selenoid it gave a value of 0, and the oil is dirty, can I change the complete selenoid body and the oil and filter?

@YepThatsIt

10 ай бұрын

hi, make sure you bench test as many solenoids as is practical. often all the solenoids and sensors are contaminated with metallic debris. cheers

@jaimelopez4526

10 ай бұрын

Suddenly at times the solenoid comes in. Could it be due to contamination or dirt? I say that it comes in because the changes come in with force and when the solenoid is deactivated it jumps and that's when I realize, it advances slowly when the selenoid is deactivated

Hello I'm from Canada. I love the thoroughness and tutorial video! I have a 2004 Sonata gls 2.7 V6. The ladt oil change the dealer no longer carried the SP3 oil and put in a Valvoline universal oil that was compatible. About 3-6 months later I am getting a jerking when the automatic transmission shifts from 2nd to 3rd. I had changed my front and back motor mounts with after market and it did help for a bit and dudnt feel the hard shift, but the problem came back maybe because the mounts are taking a beatinf. It even happens in the Tiptronic mode. I find the hard shift is worse when driving 30km. If I accelerate fast until 3rd gear it is much less noticeable. I think because the pressure is greater. I am wondering if it is a fluid issue or a solenoid issue or something in the valve body? I would greatly appreciate your help. I am handy and do replace a lot of my own parts but never opened up a transmission before. Thanks in advance. I would be glad to contact you outside of youtube.

@YepThatsIt

2 жыл бұрын

hi, always check all the basics first, even a weak or diminished battery or bad earths can add to issues.if you dont have any fault codes it could be leaking solenoids or even contaminated solenoids ? depending on mileage on trans, you could also have worn valve body...sometimes a valve body zip reseal kit can help improve the pressure wear. another thing that can help improve the fluid quality is a product called lubegard. they have a website. very hard to help diagnose like this. if you like to discuss more, contact me on our facebook link in description and bring/cost you some beers. cheers

2010 elantra .... filthy fluid... shifting is slow at times.... getting off highway slow to shift down, slow to shift up from 2 to 3rd... seams to hit 1rst then 3rd.... I replaced solenoid pack.... did nothing now ordered rebuilt valve body but my question is the accumulator pistons.... should they be replaced??? if so where to order or what part to search for.... springs seem fine.... I question the the rubber rings.... Video is awesome! D

@YepThatsIt

Жыл бұрын

hi, sounds like it has been under serviced or high mileage? might pay to air pressure test apply ports when you have vbody out. if trans has internal wear and pressure leaks, your repair might be unchanged or short lived. cheers

Are you able to assist me with how to put back together the valve body? When removing from transmission I removed wrong bolts

@YepThatsIt

2 ай бұрын

hi, can only try. cheers

Part numbers on harness please for the transmission you are working on this video.

@YepThatsIt

Жыл бұрын

hi, contact dealership. cheers

Hi i got a problem with my grande i10 the third gear slip can you help me with a solution Thanks

@YepThatsIt

2 жыл бұрын

hi, check all the basics first, then work on from there. cheers

Where can you get the gasket? or is there a part number?

@YepThatsIt

Жыл бұрын

hi, if you are in australia you can order through us via facebook link in description. cheers

On the valve body threr is two boll and a short spring, can you show where they are place

@francisolivacce8209

Жыл бұрын

Can you please reply

@YepThatsIt

Жыл бұрын

hi, sorry cant show on here. try our contact link. cheers

@brettdilworth8643

Жыл бұрын

Great job explaining everything. You’re definitely the most thorough best I’ve seen. Please keep up the great work. What’s your contact link or maybe you can shoot me a link to your email I have a couple questions about my kia. Thank again for your videos.

Hi Was there a selenoid error?

@YepThatsIt

2 жыл бұрын

hi, should show a start of vid. cheers

Hay mate do have any valve body for sale?

@YepThatsIt

2 ай бұрын

hi, yes contact details in description. cheers

it the accumulators am trying to get right for in the morning

@YepThatsIt

2 жыл бұрын

hi, the accumulator piston thats on its own has 2 springs, and the middle one has 2 springs, although i`m not sure if they have different tensions? we usually put back the same way we find them. cheers

@tayabhussenee5974

2 жыл бұрын

The two small spring have different height

Kia rio not running when shift to drive

@YepThatsIt

4 ай бұрын

hi, check all the basics first. cheers

@jeffersonmartinez5006

4 ай бұрын

@@YepThatsIt sir what cause of kia rio stuck 3rd gear, ecu repaired, test in bnew ecu, same results

I have a 2010 Hyundai Elantra. Where could I purchase the valve body myself

@YepThatsIt

2 жыл бұрын

hi, if you are in Australia you can buy from us via our facebook link in description cheers

@gorillamad7544

2 жыл бұрын

@@YepThatsIt Negative I live in the States. Just been having issues locating one

Terjemah BHS indonesia