New subscriber here, I just love it when someone takes pride in what they do and that makes it not only look better,but says a lot about you as a tech!! Keep them coming
@poeticjusticemacias959411 ай бұрын
Beautiful work I'm in school for the trade and this is the standard of work I seek to offer
@jmalmy2068Ай бұрын
Here we go!!!! This is gold!!
@jorgebonilla60174 ай бұрын
Looks really good and well explained 👏
@a4n2g0el13 күн бұрын
Good rule of thumb on the benders ! Appreciate that point of view
@ac-mech1265 Жыл бұрын
Awesome mind blowing installations everytime
@JB-pw9spАй бұрын
Well done!
@genehowley146510 ай бұрын
Nice piping work. Clean and looks good
@kevinsklow3473 Жыл бұрын
Very nice layout, looks great.
@josecruz323711 күн бұрын
Great technique ❤
@ThermalDynamicSevices11 ай бұрын
Awesome job! Super clean install!
@thecurious67217 ай бұрын
Thanks Jeff! Great job 👍
@andrecontois8510 Жыл бұрын
Golly way easier than me trying to keep the condenser in place the whole time!
@jimdomiano455210 ай бұрын
Nice clean job, you make it look so easy
@israelquintanilla27847 ай бұрын
Appreciate your work man thank you for this
@erikizquierdo713021 күн бұрын
Nice thanks for that ima try it out
@chrisdiaz1941 Жыл бұрын
Supper clean work!
@DanO181919 Жыл бұрын
Thanks for the video, this was very informative. 👍
@mr.chirinos599311 ай бұрын
Magnificent job!
@hvacworx74147 ай бұрын
Awesome trick!
@user-ti2ft3su4g7 ай бұрын
work of art !!!!
@qamrulfarooqi Жыл бұрын
Nice explanation
@FixthisCD5 ай бұрын
That does look nice
@richardharmon874 Жыл бұрын
Good video man.great job
@padilla701911 ай бұрын
Great information
@snwsk89 күн бұрын
I started doing something similar to try and nail the service valves that come out at a 45.
@fighkb5 ай бұрын
Good video and great tips on marking bend for copper pipes! 👍🏼
@guillermo581210 ай бұрын
very good video
@mikestevenson1819 Жыл бұрын
Thank you sir
@danielrodriguez-hj5ky Жыл бұрын
Thanks bro will make my job easier
@kevinpearce32817 күн бұрын
I don’t use press fittings. I braze fittings on.
@filemontorres763521 күн бұрын
Why is the brand of you pressing tool and what’s you leak ratio? Also the brand of your first bender? Thanks…
@HVAC-TECH-Les Жыл бұрын
That looked sweet. How long have you been using press fittings? Any issues?
@BabyKMoney
Жыл бұрын
“RLS” def better than zoomlock but they are great! As long as you prep it properly
@jeffjdemhvac
11 ай бұрын
I’ve been using it for about 3-4 years now and it’s fantastic. Rls has given me no problems. Any problem I’ve ever had was user error
@vincentgelles38058 ай бұрын
Did you put the drier inside?
@BRISTOLFORCE200911 ай бұрын
Is the new unit a trane xr condenser?
@carlmccoy6627 күн бұрын
I like to clean the pipe before cutting
@natehicks893911 күн бұрын
Why didn’t you use the 3/8” shoe and arm with the hilmor to bend the liquid line? So on the shoe where it’s printed hilmor is when you line it up to make the bends. How you are doing it going by the handle may be pretty close to that. I will pull out mine and check. Great tip on how you mark the pad for lining up the line sets!
@troybowman14011 ай бұрын
Sweet
@melmoniz Жыл бұрын
🤙
@c.blakerockhart11284 күн бұрын
You didn't install a filter/drier, and I wouldn't trust that press fitting for refrigerant. Those lines are going to vibrate a lot. The HOMEOWNERS are going to have to PAY SOMEONE ELSE to come and weld the leaks that you just insured WILL HAPPEN. They LOOK nice, they are FAST, they are cost effective for YOU. But they WILL cost the homeowners in the future.
@tesesincha9 ай бұрын
Hope this didn’t get brazed without the drier
@AJ-ox8xy
10 күн бұрын
He probably puts inside right before the txv.
@mwdub027 күн бұрын
You guys are running rogue with these press fittings, our company has been replacing them whenever we come across one. They’re leakers. We’ve made tons of revenue to remove them. I really feel bad for customers.
@alexandrostapantaola191
6 күн бұрын
They don’t leak as long you install them correctly.
@francobarbagallo89157 ай бұрын
You show up to a customers home with that thing in your ears? That’s crazy
Пікірлер: 47
New subscriber here, I just love it when someone takes pride in what they do and that makes it not only look better,but says a lot about you as a tech!! Keep them coming
Beautiful work I'm in school for the trade and this is the standard of work I seek to offer
Here we go!!!! This is gold!!
Looks really good and well explained 👏
Good rule of thumb on the benders ! Appreciate that point of view
Awesome mind blowing installations everytime
Well done!
Nice piping work. Clean and looks good
Very nice layout, looks great.
Great technique ❤
Awesome job! Super clean install!
Thanks Jeff! Great job 👍
Golly way easier than me trying to keep the condenser in place the whole time!
Nice clean job, you make it look so easy
Appreciate your work man thank you for this
Nice thanks for that ima try it out
Supper clean work!
Thanks for the video, this was very informative. 👍
Magnificent job!
Awesome trick!
work of art !!!!
Nice explanation
That does look nice
Good video man.great job
Great information
I started doing something similar to try and nail the service valves that come out at a 45.
Good video and great tips on marking bend for copper pipes! 👍🏼
very good video
Thank you sir
Thanks bro will make my job easier
I don’t use press fittings. I braze fittings on.
Why is the brand of you pressing tool and what’s you leak ratio? Also the brand of your first bender? Thanks…
That looked sweet. How long have you been using press fittings? Any issues?
@BabyKMoney
Жыл бұрын
“RLS” def better than zoomlock but they are great! As long as you prep it properly
@jeffjdemhvac
11 ай бұрын
I’ve been using it for about 3-4 years now and it’s fantastic. Rls has given me no problems. Any problem I’ve ever had was user error
Did you put the drier inside?
Is the new unit a trane xr condenser?
I like to clean the pipe before cutting
Why didn’t you use the 3/8” shoe and arm with the hilmor to bend the liquid line? So on the shoe where it’s printed hilmor is when you line it up to make the bends. How you are doing it going by the handle may be pretty close to that. I will pull out mine and check. Great tip on how you mark the pad for lining up the line sets!
Sweet
🤙
You didn't install a filter/drier, and I wouldn't trust that press fitting for refrigerant. Those lines are going to vibrate a lot. The HOMEOWNERS are going to have to PAY SOMEONE ELSE to come and weld the leaks that you just insured WILL HAPPEN. They LOOK nice, they are FAST, they are cost effective for YOU. But they WILL cost the homeowners in the future.
Hope this didn’t get brazed without the drier
@AJ-ox8xy
10 күн бұрын
He probably puts inside right before the txv.
You guys are running rogue with these press fittings, our company has been replacing them whenever we come across one. They’re leakers. We’ve made tons of revenue to remove them. I really feel bad for customers.
@alexandrostapantaola191
6 күн бұрын
They don’t leak as long you install them correctly.
You show up to a customers home with that thing in your ears? That’s crazy