Here’s how to not backflash start off with Max drag and slowly loosen it learning how to control your fingers pressure to not backflash it

@OKFishing

Жыл бұрын

That's how I learned!

@alexpelico4649

Жыл бұрын

you mean max suspension? the drag is the star

@FullNelson007

Жыл бұрын

​@@alexpelico4649you mean max brake?

@user-pi7pn1zg4x

Жыл бұрын

Set your brakes to max (if your new to them) then loosen or tighten your tension knob till your bait barely moves or doesnt move at all. Once you get used to it you can loosen the brakes

@OleHickory69

Жыл бұрын

@@FullNelson007you mean max Payne?

After he let it backlash like that I thought he was just gonna throw it. Lmao.

@Range-X

Жыл бұрын

Me too lol

@Chalz108

Ай бұрын

I was hoping he was gonna throw it too lol

@brianconlogue1302

Ай бұрын

Same!!

@6Anon6ymous6

Ай бұрын

I said the same Ong I thought it was gon say use a open face 😂

@tbyang95

Ай бұрын

Same thing I thought lmaooooo

This is what “NOT” to do DONT DO THIS!😂😂

@alvarez321

Жыл бұрын

I do this all the time, never had a problem getting out a backlash. You must be a noob

@trowwzers5057

Жыл бұрын

@@alvarez321if you untangle a backlash like shown in this video, it will create memory on Mono or Fluoro lines and can cause terrible wind knots with Braid line The best way to untangle a backlash is leaving the spool open and slowly, calmly pull your line out. When the line begins to feel stiff, pull the loops in your spool and make sure there are no knots. Repeat these two until you pull the whole backlash plus 5 yards of line out. Tighten drag to max and put your thumb on the line and reel in slow

@johndoe-ek6vl

Жыл бұрын

@@trowwzers5057 nah, I just threw my baitcaster in the trash and only use my conventional reels. Problem permanently solved.

@babytronjr2178

11 ай бұрын

@@trowwzers5057best way to do it fr

@Sauron124

11 ай бұрын

@@trowwzers5057yep

NOPE! Been fishing since i was 9 im now 55. If you can pull this off regularly you should buy lottery tickets!

@SkeletorJenkins

29 күн бұрын

No doubt.

@allenlebaron8993

16 күн бұрын

honestly it works. with braided line not nearly as well but it’s still doable

What I do is I pull the line out of the eye of the reel until I hit a loop on the bail that prevents me from pulling more of the line out of the reel, I pull at the loop or loops on the bail that are holding the line back until I can pull the line out again and continue this process until the birds nest is completely gone. This can take time depending on how bad the birds nest is, and from my experience this usually works 90% of the time.

@jdawg4510

26 күн бұрын

Lock the release then turn the drag super low and pull through the eyelet and 90% of the time the loops will pull themselves out.

@benradey379

26 күн бұрын

@@jdawg4510 ill have to try this

@CountryboyCale

23 күн бұрын

Same here. Often times if you pull to fast you’ll make a knot and not be able to get it out.

@jefferyleo76

3 күн бұрын

This

@RobsFishingProds

Күн бұрын

exactly what i do.

I have after many backlashes over the years and through ao many thousands of casts...Thumb control is key.

Fish that’s about to strike on the fall, “I’m bout to ruin this man’s whole career”

@jayestremera92

18 күн бұрын

LMAO

I just pull the line out and pick the loops, works great haha

@OKFishing

Жыл бұрын

Yea, that works, but then you have to cut your rig off :/

@gillboygd

Жыл бұрын

@@OKFishing nah I’ve never had to do that

@jumpoutmike

Жыл бұрын

hold the spool with your thumb and pull the line with opposite hand, works like a charm

@vanceypoo8796

Жыл бұрын

I just rip on the line as hard as I can and it comes out

@iankonynenbelt

Жыл бұрын

@@jumpoutmike I do the same exact thing, works every time

I was dyeing while watching that cast😂😢

Call me old fashioned… but I hate baitcasters. I have one. A good one. And I hate it. I’ve practiced and practiced and these still happen. You know what never fails? The old flip up. It’s just… perfect.

@Lee2wavvyy

18 күн бұрын

Use what works for you! Baiters are easy for sum but not for all. Stick to what u know💪🏾 I love baitcasters, God bless you

@domzdaman373

18 күн бұрын

@@Lee2wavvyy Right on brother. Point is, we all like slammin’ those big ones. So cast on, friend.

@escapetherace1943

17 күн бұрын

@@Lee2wavvyy Even if a baitcaster is easy for someone, it can never be as easy as a spinner

@josephcarlson7722

17 күн бұрын

It’s about the line tensioner and what gear your brake is on. Doing what this guy does in this video no wonder people hate them lol

@anthonysanders4326

17 күн бұрын

I'm right there with you bro

That depends on what line you have on it.

@Sharky203

2 ай бұрын

It works with mono but not braid

This is what not too do

@F1SHH1

Жыл бұрын

i knew this trick before this video and he is right, this actually does work very well!

@theoneandonly1take

Жыл бұрын

@F1SHH it might be the right way but no one uses that truck am I right?

@F1SHH1

Жыл бұрын

@@theoneandonly1take i actually do use it

@MrMd5555

Жыл бұрын

I use it with braid but with mono & flouro it doesn't always work for nasty nests

@bigdank7789

Жыл бұрын

@@MrMd5555 he’s doing it with mono bro

Hey just a little tip! Even though this is coming from a 13 year old. Trust me! When casting always keep you thumb on the spool and slowly apply more pressure therefore guiding the line! Have a good one!

@OKFishing

Жыл бұрын

Yup, that would be how to avoid a backlash. In the video I did it on purpose to show you how to fix one. You have a good one too!

@punchifishing

Жыл бұрын

well i just pull the line out and when I can’t pull (it got stuck) I just pull the line that is blocking the main line from pulling out and I just pulled the main line out again (it’s probably faster than this) :)

@vexed3379

Жыл бұрын

I hit a bush and got a big ass back lash I want to die rn

@layylowwluu

Жыл бұрын

If you need to have youre thumb on it then it contradicts the whole point of having the bait castor just get a spin reel n bomb lures

@devinthedumdum2422

Жыл бұрын

@@layylowwluu Incorrect by slowly adding more and more pressure you still get the initial bomb of a cast but your not adding so much pressure that it just slows it down its more of a guiding action

Man you really lined the whole pole

The correct title: what not to do when u backlash

@CountryboyCale

23 күн бұрын

That’s what Bill Dance does and teaches people.

Spinning reel=No problem to solve

@BestBass_fishing

23 күн бұрын

Nothing against spinning reels, but they have no skill in them. Baitcasters have many different brakes and dials that spinning reels don't and you can easily throw bigger baits with a casting reel.

@jayflottman3675

23 күн бұрын

​@@BestBass_fishing I agree, but I've found spinning rods allow you to focus more on fishing and not having to worry about knots/backlash, and I think the fight is more fun.

@Ardeact

21 күн бұрын

Different purpose. Baitcasters are meant for heavier lures with accuracy for artificial presentations. I love a spinning reel for finesse fishing like ultralight lures.

@AndyGarcia-ch1ci

13 күн бұрын

I agree spinning reel is the way to go.

Went fishing on my own for the first time in forever and was so excited when I figured that out 😂

Also if you use rope line it won’t tangle that bad just a heads up

hold your thumb lightly on the spool during your cast to slow it down near the end, also tighten the left dial so the spool spins just a little slower. backlash is usually from the spool still having momentum when your lure already hit the water.

@SLIMRISKY

Ай бұрын

My line does this all the time how do I prevent it!!! And tighten it

@stevene4dd926

17 күн бұрын

@@SLIMRISKY look on yt many videos on it have to use spool tension knob on right side and brake on left side and adjust to the lure you are using. changing lures may mean you need to adjust these.

After the backlash, I thought he was just gonna cut the line 😂

That’s why I hate them reels . This the dumbest reels ever made

@MrthinkYTSFS

Ай бұрын

Not true, baitcasters have their own special abilities that other reels don’t have. There is magnetic brakes and knobs you can tune to prevent a backlash.

@STBcailshootout

Ай бұрын

Yea there super strong and good u just don’t know how two fish with them

@TheChamp601

Ай бұрын

@@STBcailshootoutI fished with 10 of them at training they a pond and all them looked like this or ended up being like this after casting

@TheMoneil10

Ай бұрын

@@TheChamp601 because you don't know what you are doing. You need to set the brakes and tension knob so it stops the spool when the lure hits the water. There are videos about how to. Also hold your thumb on the spool and apply pressure when the lure is about to hit the water.

@sussybaca7256

22 күн бұрын

​@@TheChamp601 lol sounds like an issue with the user. I bought a cheap baitcaster to practise with after about 20 minutes i was casting it just as good as my spin real. I used to be only spin real but went fishing in washington state for salmon and the rods on the boat were all baitcasters. Nice thing about that is i didnt have to cast just pull line out by hand the guide told us how much to pull out depending where we were on the boat. Caught the biggest salmon that day.

I just pull it and it comes out straight away most the time

This man sacrificed a backlash for us. Real g 💯

Him: do not pull on the lines Other ppl: pull on the lines until it looks straight

This is why bass fisherman has 10 poles in the boat

Welcome to the fraternal order of the birdsnest.

The adjustment will have to be made for every bait. Since worms and crankbaits don't weigh the same. For example

thanks dude, i got my first baitcaster this week ,im fishing for over 10 years now never had a baitcaster before partialy couse of backlashes

I always want those kinds of fishing rods but I still need to learn a lot more with the open reel

I known this for a long time, a must-have technique. Also ayy Black max is an incredible reel for the price.

Set the tension on each lures weight and no more backlash

@systemofthesovereign

Күн бұрын

people are too stupid to do that. people are so stupid they wage slave for 60 years and act like retiring at 65 is worth half a shit

Just pull out the line until it stops, then pull out the loop from the spool side that is stopping the line from coming out, then pull the line out again until the backlash is out or you hit another loop and then do it again.

this is why I swapped reels cuz baitcasters usually get backlash often and once I got it and while trying to untangle it I hooked on to a 4-5 pound carp and it instantly tightened it and I had to wrestle it while trying to untangle the line till I gave up and cut it

Little tip I also use a abu Garcia black max but that real works so much better with braid

This is a good idea, but I prefer to just pull the line and if it stops and pull the big clump a couple times in different directions and keep doing it until it’s all gone

him:Do NOT PULL THE LINE him 1 second later: PULL THE LINE-

You also have to pull the line after applying pressure

I was gonna ask if that the Kelowna area but then noticed the name of your channel lol

Haven’t had one that required respooling… yet. Somehow they work out.

This is also why I use braided line. Sooooo much easier to get BL out.

Cast while turning the reel 90⁰, eliminates most of all backlash

Homie has nails like Dracula's baby mama.

This doesn’t work

I thought south paws were so crafty!

Let's just say I will fall into my knees and yelled no at the top of my lungs since that will ruin my entire week

After backlash...throw baitcaster as far into the lake as possible...rod and reel. Purchase appropriately sized spinning reel for use when casting. Conventional reels are for downlining and trolling.

or just usw a regular reel like 90% and only BC for big baits

Very often, I get my backlashes out by just thumbing the spool backwards.

Tie on lure of choice set magnetic brakes to zero. Adjust spool tension knob , so the lure slowly falls to ground. Then set your magnetic brakes back to 7-8, make cast lure should hit the water without backlashing and without breaking with your thumb. 👍💯

This works sooo well

Should the reel handle be on the other side since he’s casting with his left?

@OKFishing

Жыл бұрын

I am what you call a super lefty, I do everything with my left hand

@TristonMyran

Жыл бұрын

Never heard of left handed baitcasters?

@bElLtOn14

Жыл бұрын

I cast both hands and wind with both 🤷‍♂️🤙

@Mr2it3881

Ай бұрын

I'm right handed and I reel with my right. My dad always did it too when I was little and we both realized years later we were doing it wrong lol.. too late now

@Njennings42

28 күн бұрын

@@Mr2it3881 reeling with your right hand is what you're supposed to do as a righty lol. the reel in this video is a left handed reel, which you would reel with your left hand.

Did they just reel in the backlash to the spool ?

THANK YOU

god showed me this video for a reason because i just started learning to use bait casters and ive been pulling the tf out the line when I get a backlash. Thanks 🙏🏿

@OKFishing

11 ай бұрын

Glad I could help!

@TruIyDead

10 ай бұрын

Oh god did? Thought maybe it was KZread algorithm

@BeachbaIICS

4 ай бұрын

@@TruIyDeadthey don’t believe in us, god did

@tylerromero908

2 ай бұрын

Yeah don’t do this lol

*casts right into the wind*

That’s why my dad said don’t get those type of fishing rods😂

You’re going to end up with a mess. Just tighten the brake and pull the line. No rinse and repeat necessary. If you run across a snag, push the line back a tad instead of pulling and gently rub the line side to side with your thumb, then pull it free

I usually do this pull line off reel and there will be one that is crimped pull that one and normally comes out

Or just set your spool tension to the drop of your lure, and don’t flick your wrist at the end of the cast!

Bro definitely edited it

I thought he was just gonna say cut it lol

With braid it’s better to pull it out and then just reel it back in

The way I prevent backlash is I don't buy a baitcasting reel, I use a spinning reel instead

That picture looks exactly like Southern BC Canada. Would have thought the OK stood for Okanogan.

@goodeye6373

Ай бұрын

Near Penticton.

Line conditioner would help prevent it as well

use braid the backlashes are way less and fixable

@Range-X

Жыл бұрын

Idk man I have to cut braid more often than mono when backlashed bad enough

Love the pole dude I have one too😊

I’ve never tried this but this looks like the scariest thing I could ever try😂😂😂

Don’t do this unless you want to ruin your line and maybe even make the backlash worse

I guess that's some decent advice personally I wouldn't do that cuz after every cast you're going to have to do that technique so yeah

This would have helped if I would have know it before I did a bad one today. I have to cut all the line out!!!😢

@PlayBoiClarchy

Жыл бұрын

Don’t do this!😂

@voidszn9104

11 ай бұрын

Never do that your line 99% of the time can be saved.

If you Bird nest make you line a little tight then look for the loops and bring them out then gide your line nicely in

I was waiting for the splash in the water lol

I only tend to backlash when it’s windy

I do exactly what you say not to do and it works just fine for me 🤷‍♂️

@Skelevon_gaming

2 ай бұрын

That can damage your line tho because the loop goes over the main line going through if you pull that loop will make a crease in the line

ok so i did this today and it worked

pov you have a spinning reel

This picture is the exact reason I switched to braid

Or don't use monofilament and use braided line. You will have more adjustment with your drag and a better time fishing.

I just cast it in if it’s backlash and then I release the bail start pulling out the line until the loop shows itself after I just hold on tight to the line and just reel in it doesn’t always work sometimes I have to unloop a little bit and next yeah.

That wind blowing is a backlash magnet it comes up ya better put on a heavier bait & slow down the cast speed & as always keep your thumb on the line. But just in case of wind or what not I also bring a spinning reel for drop shot etc. ya don’t drop shot with a bait caster.

What I do is use a regular open face reel and I never have this problem lmao can’t convince me to use a bait cast reel

In my experience , if you will look for the “crossover”

Reminded me why I'll stay with spinning reels lol

Instructions unclear I don’t have any my line on my reel and I’m tangled all in in the line

Use a pe line or a braided line bro. Nylon line is easy to keep memory and always keep getting tangled. Braided line dont hold memory and hard to get tangled cause they are braided

Most of the time I wind up having to pick the nest loose…do not do this on tension or it could ruin your day ! Lol

in Italian we call this "wig"- (parrucca)-, more rarely "spaghettata". it cannot be translated because spaghetti remains spaghetti in all languages. spaghettata, I could translate it as "spaghetted" 😅

Yeah and it would go a whole lot quicker if you would just pull in the mainline slowly. I've been using bait casters for multiple years now and I have new had an issue with pulling on the main line

I pull the line out and then put tension on it with my fingers. If I sense a knot I stop reeling and untie it. And if I’m lucky I can get rid of the backlash completely. Only works half the time though 😔

Tips for preventing backlash used braid not mono not fluorocarbon because braid doesnt backlash as much

@stevene4dd926

17 күн бұрын

braid will back lash just as much as the others and I have to cut more braid backlashes out then mono or fluoro.

I think you need to do one man that’s very curled up

That is so cool now I know how to do it now I can teach my great nephew how to do it

I've always called that bird nesting

does it work with braided line

How many metters can u put on ?

It really does work

He did that twice then cut the line 😂

Amazing vlog Wow this place is so beautifu Thanks for sharing well done Best wishes

Did this and caught it my PB largie at 27.5lb on a rooster tail with 2# test. Who knew you could boat flip such a hog with such light line, on a BFS setup.