How to get perfect fitting CNC joints every time
Тәжірибелік нұсқаулар және стиль
Get this display shelf digital file here: academy.learnyourcnc.com/cnc-...
Learn how I designed this display shelf: academy.learnyourcnc.com/blog...
Double-sided tape I use: amzn.to/3Mh2kj9
Feeler gauge for fine tuning joints: amzn.to/3ojRAsm
5 Methods for adjusting slot widths: • TOP 5 Ways to Edit Slo...
Have you ever needed to make tight fitting joints with your CNC? Or have you made joints that don't fit together just right? This video will show you how to make perfect fitting CNC joints every time with some very simple tricks! This lesson applies to Vectric VCarve, Aspire, and Cut2D.
Vectric Master Training Course:
go.learnyourcnc.com/vmtc
Live Weekly Vectric Training:
go.learnyourcnc.com/live-trai...
My Bit & Supply Recommendations:
embed.kit.co/LearnYourCNC
Vectric Tips & Tricks Facebook Group:
/ vectrictipsandtricks
CNC Training Courses:
academy.learnyourcnc.com/
Timestamps:
00:00 Intro
01:15 Create test joints
08:54 Cut sample parts(round 1)
09:33 Test fit and measure adjustments
09:56 Adjust joints for proper fitment
13:51 Cut sample parts(round 2)
14:26 Final file adjustments
18:18 Cutting and assembling final parts
Find me online:
■ Website: www.learnyourcnc.com
■ Instagram: / learnyourcnc
■ Facebook: / learnyourcnc
■ KZread: / learnyourcnc
■ Blog: www.learnyourcnc.com/blog
#tipsandtricks #vectrictips #learnyourcnc
Пікірлер: 55
What did you think of these techniques to get tight fitting CNC joints? You can download the display shelf files from this video for FREE here: academy.learnyourcnc.com/cnc-display-shelf-file-download
I'm new to CNC. Your video is really invaluable to learning how to use Vcarve effectively.
This was awesome!! I’ve been taking a much longer process to get tight joints that are no where near as accurate as this process! Thanks for sharing!!
@LearnYourCNC
Жыл бұрын
I am glad it helps! Now you can speed your process up!🏎💨
Thank you for the download. You have learned so much from your KZread clips!
Thank you Kyle!
You are one of the best teachers Kyle. Thank you. Very useful!👌🏻
@LearnYourCNC
Жыл бұрын
Thanks Karel, I am glad to hear that! 😊
Wow!! great tutorial Kyle, so easy to follow along. You are a great teacher, thanks for sharing your knowledge.
Great hints. Thank you
Absolutely brilliant! Thanks very much. I am brand new to CNC and looking forward to using these techniques. I will start with this shelf.
Very useful. Thank you Kyle. Jim
Excellent video Kyle and thanks for the free file.
@LearnYourCNC
Жыл бұрын
You are very welcome! Thanks for watching!😊
Nice presentation Kyle.
Fantastic video!! I did learn a lot from this. Thank you very much. I love these tips.
@LearnYourCNC
Жыл бұрын
Glad it helps!
outstanding presentation of a very useful set of techniques. Who has not ever cut a joint too loose and spent a ton of time fixing it. Great Tips and as a multi year student of your course I gotta say its easily the best money I have ever spent on my CNC! Keep them coming!
@LearnYourCNC
Жыл бұрын
I am glad you liked it and I am glad you are enjoying my course! Thanks for your support!🙌
Thank You Very Much, Kyle.
Thank you for the info and the file, I have to make the same thing for my wife's craft shows. I'm off to a good start now thanks to you!
@LearnYourCNC
Жыл бұрын
I am glad it helps! I designed this one for my sister's craft show.
good video the best surprise tip was the extend tool at 12.10 in i had never used it even though it was there all the time
I learned a lot from this. I wish I found this channel sooner. Good stuff!
@markcollins499
Жыл бұрын
I subscribed to the lessons. Well worth the investment
@LearnYourCNC
Жыл бұрын
I am glad you learned a lot and I'm glad you found my channel!😊
Awesome video!
Great tips thank you
Great video! Thanks!!
Thanks, nice tips
This is some very usefull information..... Thank you Kyle for sharing your knowledge. I recently made a cupcake stand with this kind of assembly..... my issue was I had painted the wood before I cut it out, therefore leaving my "slots" not big enough...... Now I know how I should have tested it before cutting the whole project out. Even though... the thickness of paint will not always be the same thickness.... LOL..... Thanks again.... Have a Safe and Wonderful Holiday 👍
@LearnYourCNC
Жыл бұрын
That is a great point! I have also run into that issue before with the paint thickness haha. Live and learn. I am glad you found this video useful! Have a safe and wonderful Memorial Day as well!
Great video super useful learnt several new things, thanks so much
@LearnYourCNC
Жыл бұрын
Glad to hear that!
Great video, Kyle!! Next time I need to see your SS23 in action and maybe try a 1/8" compression bit and cut in one pass ;-)
I had no idea you could put calculations into boxes to offset things, thats pretty dang handy I bet. Great video, nice strategy too.
@LearnYourCNC
Жыл бұрын
I am glad you learned something new! :)
Good video boss. Probably can make more videos by using what we do in class projects.
@LearnYourCNC
Жыл бұрын
Thanks! That's the plan :)
Nice video, thank you
@LearnYourCNC
Жыл бұрын
Glad you liked it!
🎉good job❤
As always- best information on this channel! I use the same tape: be careful because it can work too well and rip the veneer off cheap plywood. I'm saving my money for your course and looking forward to it!
@LearnYourCNC
Жыл бұрын
I am glad you liked the video! Thanks for the warning and I actually had the same issue with cheap plywood - just had to be more careful pulling the tape off haha. I am looking forward to seeing you in my course community!🙌
Its much easier to adjust the diameter of the Routerbit in the toolpath data..
Hi. I will have my CNC machine this weekend. In the meantime, I learn VCarve Pro by watching many videos like this one. I have downloaded the shelf files to learn/duplicate what you teach on this video. I work in metric and made my work area 1 000mm x 1 000mm ±40" x 40". When I import one of the files, it is a small little sketch on the bottom left of the work piece. Am I doing something wrong? I thought it will be on a 1:1 scale. I import the *.dxf file. Your video doesn't show how you import the file. Thanks very much.
Lmao the fart noise made me laugh
isn't there a button that auto arranges your cutout shapes for maximum utilization? I forgot what it's called
@LearnYourCNC
Жыл бұрын
Yes, that is called the Nesting tool but it is not available in the Desktop versions of Vectric software. You can see a video I did on Nesting here: kzread.info/dash/bejne/h22klcNpeseZd6g.html
I would just change the tool Dia. If over all part Dim. Not critical.
@LearnYourCNC
Жыл бұрын
You can do that too but I think the allowance offset is easier and that's what it is there for😉
@iounatta
11 ай бұрын
Yeah, and I mic my endmills. Most cheaper endmills are off. My 1/4" bits are often .244. Starting with the actual size can help.
Your ancestors are surely Germans. You look like a German, you are technical like a German :D You are very experienced and you talk about excellent things - but the emotionless style of your speech makes the whole thing sound very boring :D I have to concentrate hard to not fall asleep while listening to your fantastic tips :D
@LearnYourCNC
Жыл бұрын
Guten Tag! You have my funny bone tickling with your comment. Ja, it seems my face screams "Deutschland" and my style whispers "Ssshh... sleep." :D Even though I'm not German by birth, maybe my spirit is just trying to abide by the German efficiency mantra a tad too earnestly, eh? You've given me something to ponder over, a puzzle to solve. I'll definitely try to incorporate a bit more 'oomph' into my presentations. Maybe I'll even add some yodeling to keep things lively!😂 So prepare for the unexpected, my friend! Thanks for your feedback - it's more appreciated than a well-cooked Bratwurst at Oktoberfest! 👍
@iounatta
11 ай бұрын
@@LearnYourCNC Way to keep the conversation fun and light. 👏