how to get grease through a grease fitting
Тәжірибелік нұсқаулар және стиль
Having a hard time getting grease in a grease fitting I hope this video helps you.
#howtogetthroughagreasefittings #greasefittingtroubleshooting #kevinrobinson
Grease guns amzn.to/3vE6Qku
Grease amzn.to/3OYqXkj
Grease fittings amzn.to/3zodVGI
Grease rags bulk amzn.to/3bxv4pO
As an Amazon Associate, I earn a small commission from qualifying purchases.
This will not, however, change the price of any product you purchase.
This helps support the channel and allows me to continue to make videos.
Thank you for the support!
Keeping it real & clean for all to watch.
If you would like to help support.
The Rusty Rooster Homestead paypal.me/kevinrobinson6688
If would like to sponsor a video Email kdr6688@gmail.com
Mailing address
kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123
Thank You for your help and support.
Пікірлер: 25
Great video. I have had grease fittings that would not let the grease go through it also. I love your little cut away fitting. That was well explained for someone who didn’t know how they worked.
@Robinson-Homestead
Жыл бұрын
Thanks Frank hope it helps someone.
Really great information, that’s a very common question. Thanks for the video Kevin, be well my friend.
@Robinson-Homestead
Жыл бұрын
Thank you Hatch.
Hi Kevin, stopping by to continue with my support. Good tips in this video. I never split a fitting but having older cars & equipment the torch was used many times. 👍# 73 Stay well, Joe Z .
@Robinson-Homestead
Жыл бұрын
Thanks for watching Joe i appreciate it,
Thx to watching your video I figured out why one of the grease zerks on my BH77 backhoe wouldn't take grease. It had paint on it but I couldn't see it for the grease on it. Works great now. 👍
@Robinson-Homestead
Жыл бұрын
Thanks for sharing glad to help.
Thanks for the tip. very informative my friend.
@Robinson-Homestead
Жыл бұрын
Thanks William.
Thanks so much
@Robinson-Homestead
7 ай бұрын
You're welcome! Thanks for the comment.
great vid!!
@Robinson-Homestead
Жыл бұрын
Thank you ERKNEES.
Thanks man. Appreciate your videos. Have a double-cardan joint on the rear driveshaft of my stretched TJ on 40's that can be tricky. Have to align the driveshaft just right and use a needle greaser with a hardened tip to hit the sweet spot. OK, that sounded a little creepy. Happy trails!
@Robinson-Homestead
Жыл бұрын
Lol you got to do what you got to do.
What causes MOST of the fittings NOT to take grease is they have pumped dirt and sand INTO the fitting. ALWAYS, ALWAYS, ALWAYS take a rag and clean the fitting BEFORE you ever put the grease gun on a fitting. If you do not you WILL pump dirt and sand into the fitting that will clog up the fitting plus over time it will damage the U-joint, pin or whatever you are greasing.
@Robinson-Homestead
Жыл бұрын
Good one Dave thank you for your input.
@thisisyourcaptainspeaking2259
Жыл бұрын
Another common problem is a grease-worm infestation.
You unscrew the zerk fitting and screw in a new one...wipe the old dirty grease off before pushing new grease in...
@Robinson-Homestead
4 ай бұрын
Thanks for the comment.
👍👍👍
@Robinson-Homestead
Жыл бұрын
Thank you for the comment Pete.
☺️ ρяσмσѕм
@Robinson-Homestead
Жыл бұрын
Thanks for watching.