Mind blown.......Just received my NY Rangers signed MATTAEU Jersey and need to treat it like this....

Beautiful work

i stand the mat board on its edge for spacers with good results as well

Very Good!!

Thanks!

I've recently started using a small hammer to tap down stubborn pins.

Nice Job Dennis, if mine even turns out half as good as yours i would be amazed.

I'm curious, mayb I'm missing something but I cannot find anywhere I might get that "mat" material you glued to the foam board? I see every item listed that you used mayb I'm blind but I dont see it listed. What is it called?

@artmusicbydennis

4 жыл бұрын

That is a Crescent Black Ragmat matboard 100% acid free, i moved it to the top list

What material is that white plate? What is the name? I'm from Brazil. Thanks

@artmusicbydennis

Жыл бұрын

You mean the foamboard!

Does the frame kit come with the glass

@artmusicbydennis

5 жыл бұрын

No, everything comes seperately

Hi, when you’re pinning the jersey to the back mat board and foam board, is the back board raised on something so you can pierce through, if so what? Thanks and great work Dennis, using your videos to frame my own jerseys!!

@artmusicbydennis

2 жыл бұрын

I moved the whole thing close to the edge of table and pin down

How thick is the foam you used to place inside the jersey?

@artmusicbydennis

5 жыл бұрын

the acid free foam is 3/16"

Great videos! Could you please advise me of the brand and part # for both the brown tape and fabric tape you use.

@artmusicbydennis

5 жыл бұрын

Brown Tape: amzn.to/2Hb2DOj Fabric Tape: amzn.to/2M6jwJ1

how do you cut the double mats to size?

@artmusicbydennis

4 жыл бұрын

Please watch kzread.info/dash/bejne/Yp-amNWqqNnJpKQ.html and kzread.info/dash/bejne/ZoCNppqkfNm0YrA.html

Any tips on getting the crease out of sleeve NFL patch from shipping?

@oaktown7509

2 жыл бұрын

If you're still curious, steam or but a towel on top and lightly iron. That's what I do

So, it looks like you might have to buy a custom sized frame to accommodate your jersey and allow enough room for a mat, then cut all your materials to fit inside that frame. I have a long-sleeved, heavy weight T-shirt with a wonderful design on front by a graffiti artist/muralist (goes by Ten Hundred) that I want to display. I wonder if I should fold the long sleeves in half (cuff ending up at the top) and pin them in place? Or would that add too much thickness, so just lay them along the sides of the shirt and pin them in place? I had been thinking of hanging the shirt on a dowel like you see kimono's displayed on the wall, but I imagine the sleeves would bunch at the shoulders and probably not look so great. Another option, I guess, is to have a plywood shape made that I could attach to a sturdy wooden hanger, drape the shirt over that and then hang it from a hook on the wall. Or could I do this myself, from a heavy piece of cardboard? or foamboard? (brainstorming here) I've seen the shadow boxes people use to display sports jerseys and I just don't like them. I do like the final product in this video - although it would have been nice to see the final result hanging on a wall, so we could appreciate the full effect.

@artmusicbydennis

2 жыл бұрын

sure, this is a custom sized frame, because Jersey has different size, I have videos framing a long sleeve jersey in my listing, by the way I offer many ready-made frames for some more situations in the description. Or you can framing a half jersey.

Do you have a link to the frame used?

@artmusicbydennis

5 жыл бұрын

Shadow Box Picture Frame Moulding: amzn.to/2AJEDMu

What type of pins do you use please?

@artmusicbydennis

3 жыл бұрын

Please see it in description

Do you have a list of supplies to buy?

@artmusicbydennis

5 жыл бұрын

Shadow Box Picture Frame Moulding: amzn.to/2AJEDMu ATG Tape Dispenser: amzn.to/2CqEkqf ATG Tape: amzn.to/2SM8P0w Acid-Free Linen Hinging Tape: amzn.to/2M4pudk Brown Tape: amzn.to/2Hb2DOj Self Adhesive Linen Hinging Tape: amzn.to/2ADnW5q Fabric Tape: amzn.to/2M6jwJ1 CRL Framemaster Point Driver: amzn.to/2SO25PH Framers Stacked point: amzn.to/2VN4agF Picture Wire: amzn.to/2Cevn2T Pins: amzn.to/2H8RqOp D-Ring: amzn.to/2M5K3pI Canvas Plier: amzn.to/2SKBHGu

What are your dimensions for the back foam board/mat board?

@artmusicbydennis

5 жыл бұрын

the sports jerseys come with different sizes, you could leave 2 inches margin and add 3 inches width of the top matboard.

@artmusicbydennis

5 жыл бұрын

EX: The sports jersey size 24"x30", total size should be 34"x40"

@kylerkhan4201

5 жыл бұрын

I have a jersey that's 33" W by 25" H at it's widest/tallest points. What would be the best size foam board to cut for my back board? Would I be able to go 40" W by 34" H like above? @@artmusicbydennis

@artmusicbydennis

5 жыл бұрын

The best size of your jersey is 35"x43", it will come oversize, so you spend more money for materials, you could make a half of jersey for saving money as link and add top matboards kzread.info/dash/bejne/mmupu65wnM-0Zc4.html

@artmusicbydennis

5 жыл бұрын

Or you should fold the sleeve's size smaller, and try to move the sleeve forward the center

Where did you get the glass from?

@artmusicbydennis

4 жыл бұрын

you can get glass from your local frame shop, glass will be broken if you order online, or Hobby Lobby or Micheals

Doesn’t the tape and foam ruin the jersey fabric over time?

@artmusicbydennis

Жыл бұрын

No, we used acid free materials

What size is the jersey

@artmusicbydennis

4 жыл бұрын

Every jersey size is different, this is a real custom framing for the customer

@eddiemathews1835

4 жыл бұрын

Art & Music by DENNIS what size team would you recommend for a youth XL

@artmusicbydennis

4 жыл бұрын

it should be approx 36x46

What would the cost of this be to have done, retail?

@willsingleton7609

3 жыл бұрын

300