How to Form, Pour and Finish a STAMPED CONCRETE Patio

Тәжірибелік нұсқаулар және стиль

Online Concrete Classes: decorativeconcreteschool.com
We've been remodeling an old building for our new office & shop, and we are finally going to pour our stamped concrete porch and patio.
We prepped the ground with a gravel base, formed the pad with 1/4" slope on it and installed 3/8" rebar for reinforcement.
The next day poured the concrete. We added sand buff integral color to the concrete truck, but we also broadcast color hardener on the surface. We used a wood plank stamped pattern on our patio and a flagstone stamped pattern on our porch.
Once the concrete had cured, we stripped the forms and stamped the sides of the concrete. We mixed color hardener with water/resin/polymer and applied it to the sides of the concrete. Then we stamped the sides with the texture skins, and created grout lines with an s-tool.
I came back the next day and washed all of the color release agent off of the surface. I also sprayed a water/muriatic acid solution on the surface to help me to remove as much release agent as I could.
We let the concrete dry overnight and then we applied a solvent based clear sealer on all of the concrete.
Concrete Rake / Come-along amzn.to/34yXlnJ
Hand Float amzn.to/2RAto1E
Hand Trowel amzn.to/2y8MchA
Bull Float & Poles amzn.to/3a5k6B8
Concrete Trowel / Fresno amzn.to/2XxRQEA
The Concrete Sliders I Should Have Used 🤦🏻‍♂️ amzn.to/3a921lt
Concrete Boots amzn.to/34BLTaZ
Collomix Xo-6 & Mixer Clean collomix.us
Note: we used stamps, sealers & color from Increte Systems. increte.com … but here are some links for similar products.
Concrete Stamps amzn.to/3ccFZQe
Concrete Color Hardener amzn.to/34z2vjO
Integral Concrete Color amzn.to/3ewoA7g
Color Release Agent amzn.to/3eiPYFL
Solvent Based Clear Sealer amzn.to/2K96slC
For a full list of all of our favorite tools, visit: www.amazon.com/shop/timdcva
Our podcast, Hacking Concrete: dcva.us/podcast
Follow me on Instagram: / timdcva
Follow me on Twitter: / timdcva
Follow Landon on Instagram: / modernpolishedco. .
Our concrete companies:
decorativeconcreteofvirginia.com
modernpolishedconcrete.com
Contact me:
Tim Seay
c/o Decorative Concrete of Virginia
14719 Wards Rd.
Lynchburg, VA 24502
...or just DM me on Instagram.
DISCLAIMER: The links in this description & mentioned in this video might be affiliate links. If you buy a service or product with the links that I provide I may receive a small commission (no additional charge to you). Thank you for supporting this channel!
#stampedconcrete #decorativeconcrete

Пікірлер: 362

  • @T12i99iN
    @T12i99iN4 жыл бұрын

    I LOVED the edging details. To me that's a rare finishing detail that isn't done often. If not often, not at all. Great content.

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you! 🙏🏻 😊 Really appreciate the encouragement. 👍🏻

  • @n8n876

    @n8n876

    4 жыл бұрын

    Except that is not how it is done. Strip the form, and stamp it with the correct stamp. They make end stamps. Think about how an end of a log looks. The grain is round. That is where the right stamp makes the whole job.

  • @SciHeartJourney

    @SciHeartJourney

    3 жыл бұрын

    I totally agree. This adds a lot to the value of home; especially the "curbside appeal" aspect.

  • @jaimeelizarraras1774

    @jaimeelizarraras1774

    3 жыл бұрын

    No saben nada nada

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you!

  • @3dodgerfans
    @3dodgerfans4 жыл бұрын

    I love it ! That’s exactly what I want for my back patio 😍

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you!

  • @bwnco
    @bwnco2 жыл бұрын

    Nice.. didnt think id ever say I missed pouring mud but this made me miss it.. Never got to do any fancy stamp stuff... pretty cool...

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Haha. Thanks! I appreciate the encouragement.

  • @jomamastool
    @jomamastoolАй бұрын

    That looks fantastic! Might need to give it a shot..

  • @giddingsrocks
    @giddingsrocks3 жыл бұрын

    That is gorgeous! Thanks for the inspiration. ❤

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you!

  • @pedropereira8924
    @pedropereira8924 Жыл бұрын

    Thanks for sharing, very nice and helpful video 👍🏼

  • @playerbaba
    @playerbaba4 жыл бұрын

    Great video. I always learn something new from you guys.

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you Ron. 🙏🏻 😊 I appreciate the support.

  • @pec1739
    @pec17393 жыл бұрын

    i like the wood stamp !

  • @psneathe
    @psneathe2 жыл бұрын

    Awesome DIY video. Thanks so much for sharing this and nice work!

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thanks! 🙌🏼

  • @brandonwestman1823
    @brandonwestman182311 ай бұрын

    Absolutely amazing - you guys rock!

  • @TimDCVA

    @TimDCVA

    10 ай бұрын

    Thanks!

  • @christdied4us
    @christdied4us4 жыл бұрын

    WOW!!! Awesome job 👍

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thanks! 🙏🏻

  • @kompshi
    @kompshi3 жыл бұрын

    wow thats an amazing job well done......thanks for the video and the details/

  • @albertogemma7574
    @albertogemma75743 жыл бұрын

    Amazing, there aren't others words to describe this job.

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks! 🙏🏻😊

  • @albertogemma7574

    @albertogemma7574

    3 жыл бұрын

    Thanks to you for allowing us to learn, see you next time and good luck

  • @Ben-tr
    @Ben-tr2 жыл бұрын

    Wow , you all did a great job 👍

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thank you!

  • @bakeralsaqer6260
    @bakeralsaqer62604 жыл бұрын

    OMG Thank you 🌹

  • @jsans8063
    @jsans80632 жыл бұрын

    Out of all the videos i have watched on stamp concrete i feel this is the easiest to follow along to learn

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thank you!

  • @7adethelrou75
    @7adethelrou754 жыл бұрын

    I love the look of wood plank!

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    👍🏻👍🏻

  • @stelstefan4199

    @stelstefan4199

    4 жыл бұрын

    @@TimDCVA Where can I buy the wood planks? Wonderful video by the way! stefanstel.ro@gmail.com

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thanks! Email me. (The link is in the description.)...or DM me on Instagram. @timdcva

  • @abenakyei3536
    @abenakyei3536 Жыл бұрын

    Beautiful work well done

  • @danlee9319
    @danlee93194 жыл бұрын

    I loved it

  • @ramookulandai1207
    @ramookulandai12073 жыл бұрын

    great detailing and work patience to produce the result creatively. tq for sharing

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @RoseBrosHTX
    @RoseBrosHTX Жыл бұрын

    This is an amazing video. Thank u so so much for sharing. 💪🏼🔥💪🏼🔥💪🏼🔥

  • @TimDCVA

    @TimDCVA

    Жыл бұрын

    Thank you!

  • @edgarcedeno7299
    @edgarcedeno72994 жыл бұрын

    Wow awesome project man watching from Davao city Philippines

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you!

  • @jonw6376
    @jonw63767 ай бұрын

    Those look great!!

  • @anthonyhayes5263
    @anthonyhayes52633 жыл бұрын

    Good work fellas,spot on👌

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you!

  • @SciHeartJourney
    @SciHeartJourney3 жыл бұрын

    This is AMAZING! This makes me want to switch professions. I hate working indoors all day anyways. BEAUTIFUL!

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Haha. Thanks!

  • @angeloacosta9411

    @angeloacosta9411

    3 жыл бұрын

    Join a construction union. We need lots of help !!! Laborers local 274 & 120 here in Indiana are great hubs for getting so much diversified experience such as- concrete, bridgework, asphalt, stormdrain, commercial, industrial, heavyhighway, etc... you get the picture. You can work all year round to. Take care brother.

  • @nibzy7149

    @nibzy7149

    2 жыл бұрын

    @@angeloacosta9411 it’s probably not as easy as it sounds I bet😢 specially with someone without experience.

  • @Madnikodemus2
    @Madnikodemus23 жыл бұрын

    Beautiful job.

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you!

  • @CCROSS5882
    @CCROSS58823 жыл бұрын

    great work, thanks for sharing.

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you! I appreciate the encouragement. 👍🏻

  • @gehtdianschasau8372
    @gehtdianschasau83723 жыл бұрын

    I landed here searching for something completely different, but it seemed interresting, so i stuck. I'm glad i did. It looks great. I like the truck driver, he is standing there like a garden gnome 2:26

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Gnome... 🤣🤣🤣 Thanks for sticking around. 🙌🏼

  • @LuigiRBG
    @LuigiRBG3 жыл бұрын

    great job guys, pretty awesome

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks! 👍🏻

  • @carmelcorreale3211
    @carmelcorreale32113 жыл бұрын

    wow that looks wonderful I want it..

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @anton48103
    @anton481033 жыл бұрын

    Just watched this video on Facebook and your work is awesome! I'm looking forward to doing similar work next spring. New subscriber, btw.

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @MapuiaChhakchhuak
    @MapuiaChhakchhuak2 жыл бұрын

    The stone finish looks absolutely gorgeous!

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thank you!

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    KZread emailed me a comment where you asked about music… but I can’t find it on here. I subscribe to epidemic sound so that I can use any music on their site in my videos. Here’s a link: www.epidemicsound.com/referral/tapjuz/

  • @MapuiaChhakchhuak

    @MapuiaChhakchhuak

    2 жыл бұрын

    @@TimDCVA thanks

  • @joshr.2600
    @joshr.260010 ай бұрын

    That was incredible

  • @TimDCVA

    @TimDCVA

    10 ай бұрын

    Thanks!

  • @Daffodil956
    @Daffodil9563 жыл бұрын

    Awsome job

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you! 😊

  • @Adam-ow8os
    @Adam-ow8os3 жыл бұрын

    You make a good video and do great work. Keep it up and keep them coming. Cheers

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks! 🙌🏼

  • @winkdinkerson7190
    @winkdinkerson71903 жыл бұрын

    Very cool! Thanks guys….

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Glad you enjoyed it!

  • @Drewskidelmar
    @Drewskidelmar4 жыл бұрын

    wow nice work! I have not gotten into pouring new concrete yet

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thanks! 👍🏻

  • @coryhunnicutt123187
    @coryhunnicutt1231872 жыл бұрын

    Fantastic

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thanks!

  • @jennymushinka98
    @jennymushinka983 жыл бұрын

    Wonderful

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you!

  • @ericcabedoce1505
    @ericcabedoce15052 жыл бұрын

    thanks for the video and sharing

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    👍🏻🙌🏼

  • @dimitriadisfanis
    @dimitriadisfanis3 жыл бұрын

    That's was awesome 👌 👏

  • @user-yy3wz6rb3w
    @user-yy3wz6rb3w3 жыл бұрын

    Cool guys and cool work

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @mrnuna4793
    @mrnuna47932 жыл бұрын

    Awesome job.

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thank you!

  • @robhutchinson1117
    @robhutchinson11172 жыл бұрын

    Excellent 👍

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thank you!

  • @pauldurotoye170
    @pauldurotoye1703 жыл бұрын

    hi..love your tutorial. thanks. Please can I use thinner as an acid base to wash off the release

  • @maryannchan5201
    @maryannchan52012 жыл бұрын

    Love it😊

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    👍🏻👍🏻

  • @wildbyker
    @wildbyker2 жыл бұрын

    excellent work congratulations.

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thank you!

  • @mahjoubali
    @mahjoubali3 жыл бұрын

    I really love ur videos, thanks for sharing I learnt a lot

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you!

  • @mahjoubali

    @mahjoubali

    3 жыл бұрын

    @@TimDCVA where can i buy the stamps from and how much could each cost me

  • @MrAbageriu
    @MrAbageriu2 жыл бұрын

    Nice!!

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Thanks!

  • @organicgardeningwithlivest4227
    @organicgardeningwithlivest42273 жыл бұрын

    Nice job

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @mikeyl6602
    @mikeyl66023 жыл бұрын

    Great video

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @augustacookeygam5579
    @augustacookeygam55793 жыл бұрын

    Awesome 👍🏽👍🏽👍🏽

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you! 🙏🏻

  • @devinrudloff
    @devinrudloff3 жыл бұрын

    Wow!! Seriously one of the best how-to stamp videos I’ve ever watched on KZread. And I’ve seen nearly all of them. Great work and great detailed descriptions of every step! Going to try adding this service to my landscape business in the future after I hire the right experienced guys!

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Awesome. Thanks! When we first started we found a local concrete finisher that would help us pour the concrete…and then we’d take over from there. It really made learning the process a lot easier. Best of luck with the new venture. Let me know how it goes. 👍🏻

  • @jasonn2284

    @jasonn2284

    Жыл бұрын

    Do it yourself.

  • @arjunrichards2516
    @arjunrichards25164 жыл бұрын

    Nice video bro. Keep up the good work

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you! 🙏🏻😊

  • @wuilmermenjivar7467
    @wuilmermenjivar74673 жыл бұрын

    Nice job.

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @user-Gentleman
    @user-Gentleman3 жыл бұрын

    Pretty good

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks!

  • @santosortegajr3126
    @santosortegajr31263 жыл бұрын

    Getting ready to do a gray driveway with the black highlights.

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Nice. 👍🏻

  • @marcopepe
    @marcopepe4 жыл бұрын

    Too bad you are not closer to where I live! Awesome job bro!

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you! 🙏🏻 😊

  • @nadiacalderon9651
    @nadiacalderon96513 жыл бұрын

    Wow!

  • @ajg0183
    @ajg01834 жыл бұрын

    Great video! Also love your podcast. Any new ones coming out soon?

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you! 🙏🏻 We’ve been schedule to record a podcast like 3 different times in the past week but it keeps getting postponed. 🤦🏻‍♂️ new one soon though. I hope.

  • @robertcollins7515
    @robertcollins7515 Жыл бұрын

    I didn't realize this much detail and work for stamped concrete.

  • @TimDCVA

    @TimDCVA

    Жыл бұрын

    👍🏻👍🏻

  • @stonebeauty2228

    @stonebeauty2228

    26 күн бұрын

    most dont

  • @harishsinhsodha8158
    @harishsinhsodha81584 жыл бұрын

    Nice

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thank you!

  • @ST-0311
    @ST-03114 жыл бұрын

    Spectacular finishes on both the stone and wood stampings. Really nice work! I noticed you didn't use expansion joints between your new and old concrete, nor wire mesh in the slabs. Are those not necessary for a job that size?

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thanks! We used rebar...not sure there’s any benefit to using mesh & rebar. Technically we probably should have used expansion joint material on the wood plank pad...but I think it’s ugly in the finished product.

  • @c.a.macrae3519
    @c.a.macrae35193 жыл бұрын

    A great video! How do you tell that the concrete is ready to stamp?

  • @williammedina9593
    @williammedina95933 жыл бұрын

    Hello, there great work guys but i have one question how long do have to wait to seal the concrete

  • @pedrochavajay7080
    @pedrochavajay70804 жыл бұрын

    Excellent job l never sin that before is interesting.

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thanks! 🙌🏼

  • @celmaracedillo4368
    @celmaracedillo43683 жыл бұрын

    its a nice job and one of the best. what powder did u used for the cement color? thank you

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    We used Increte sand buff with dark gray release. Thanks!

  • @BenBNC
    @BenBNC2 жыл бұрын

    Yo Tim! I live in Charlottesville, let me come work with y’all! 6 years nonstop concrete placing finishing stamping experience. Got all my experience doing shotcrete skateparks everything hard trowel beautiful finish, stamping, stencil, stain, exposed agg, form carpentry, rebar, trowel machine, etc I’ve done it ! Love your stuff and want to work with a passionate crew that really cares. Holler at me.

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    Can you send me your contact info? @timdcva on IG.

  • @jennymushinka98
    @jennymushinka983 жыл бұрын

    The wall got the colour

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    The entire building got painted after we finished the concrete.

  • @MrRan15
    @MrRan153 жыл бұрын

    WOW!!! is there a possibility to create a DIY wood molding?

  • @decoconcretesc
    @decoconcretesc2 жыл бұрын

    Please advise what would be a good sealer to use on stained stamped concrete driveway that would be safe for hot-tire marks. Thank you kindly, as always super work!

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    I like D1 from Deco-crete Supply.

  • @bernardogonzalez3172
    @bernardogonzalez31723 жыл бұрын

    What psi concrete would you recommend while using integral color and hardener without it drying too fast??

  • @mikewelch3903

    @mikewelch3903

    Жыл бұрын

    You would use a 5 sack mix, which 3000 psi concrete.

  • @jsusnicasio1335
    @jsusnicasio1335 Жыл бұрын

    What’s the name of the color you put on the concrete? Or how can I get the same color of concrete it looks amazing!!

  • @carloshernandez-uo1pz
    @carloshernandez-uo1pz Жыл бұрын

    Good job I want to do a walk way around my back yard where can I get some stamps about 2ft x 4ft

  • @mbatterviruz7580
    @mbatterviruz75803 жыл бұрын

    Awesome video!!!! I love how it looks!!! Where can i get the stamps?

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks! We got these stamps from Increte.

  • @saskelee
    @saskelee3 жыл бұрын

    Is there a link to the actual mat you’re using? Specific that large random flagstone. I like the size

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    It’s called “Large random flagstone” by Increte systems.

  • @ConcreteBVI
    @ConcreteBVI4 жыл бұрын

    Haha I like how you just hoped for the best in them allowing you to add the color 😆😆 assume the sale. At least he was a good sport 👌🏼

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Haha. Sometimes the drivers complain about it. You never know how they are going to act. ¯\_(ツ)_/¯ He was cool though.

  • @ConcreteBVI

    @ConcreteBVI

    4 жыл бұрын

    TimDCVA what was your plan B in case he was like “no sorry, we can’t allow you to do that !” ?

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Haha. I guess we would have only thrown color hardener. Not a huge deal.

  • @timhawley5081

    @timhawley5081

    4 жыл бұрын

    U

  • @hkathy522
    @hkathy5223 жыл бұрын

    Hello I love your design! I would like to make my patio in coming summer! Do you mind let me know more what the material you have used, it make the color shiny xx

  • @hkathy522

    @hkathy522

    3 жыл бұрын

    This is video 12:41 many thanks 😊

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Everything is from Increte Systems. The sealer is Increte Clear Seal.

  • @alvinacastaneda197
    @alvinacastaneda1973 жыл бұрын

    I seen this video on Snapchat and just had to look you guys up!! This is extremely BEAUTIFUL!! I honestly have never seen anything like it or even knew this was possible with concrete. Wonderful jobs guys 👏

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thank you so much!!

  • @alinarodzevic

    @alinarodzevic

    2 жыл бұрын

    Sveiki. Ar Lietuvoje'PaBaltijo Šalyse yra jūsų įmonė'kuri galėtų atlikti šiuos darbus?

  • @stevenbadman538
    @stevenbadman538 Жыл бұрын

    Hi Tim, where can I find used stamps or rent stamps? We are looking to do an outdoor kitchen with stamped concrete and also epoxy floor in our barn in WV. Thanks love your videos.

  • @TimDCVA

    @TimDCVA

    Жыл бұрын

    I’m not sure who rents stamps in your area. Send me a DM on IG… I might be able to point you in the right direction… depending on where you are in WV.

  • @I.am.br0
    @I.am.br04 жыл бұрын

    A non BS video... rarity on youtube 👍

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Haha. Thank you! 🙏🏻😊🤣

  • @tanyawilson-du1dq
    @tanyawilson-du1dq Жыл бұрын

    Can you tell me what color you used for the color hardener, and integral concrete color in this video? If you were pouring a small walkway and were mixing the concrete on your own what concrete mix would you use?

  • @TimDCVA

    @TimDCVA

    Жыл бұрын

    Sand buff integral and color hardener. Dark Gray release. Both from Increte systems. Quikrete 5000. We always order from a concrete plant though.

  • @IslandNassau
    @IslandNassau3 жыл бұрын

    Thx

  • @Charton5353
    @Charton53534 жыл бұрын

    How did you know when the concrete was setup enough to start stamping?

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    It’s hard to describe... we always check it by putting a texture skin on it to see how hard it is.

  • @Pegon1985
    @Pegon1985 Жыл бұрын

    I subscribed to your channel, a really cool feature would be if you periodically showed a timer or clock so the time-lapse is easier to comprehend for people wanting to learn the timing between steps. Great content!

  • @TimDCVA

    @TimDCVA

    Жыл бұрын

    Thank you! That’s a really good idea. I’ll see if I can come up with a way to do that.

  • @SobatBerkarya
    @SobatBerkarya4 жыл бұрын

    Wooo mantap👍👍👍👍👍

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    Thanks! 🙌🏼

  • @user-li6gr1dw6f
    @user-li6gr1dw6f5 ай бұрын

    شكرأ جزيلا

  • @bostonjackson9384
    @bostonjackson93843 жыл бұрын

    Nice work all the way around!!!... if you were biding the job in the video, what would be your quote?

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks! We usually bid these between $12-$14 per square foot.

  • @ayoadematthew688
    @ayoadematthew6883 жыл бұрын

    I really love this Job...how can I get all this tools?

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Google “Increte Systems”

  • @robertamaral907
    @robertamaral9073 жыл бұрын

    I would still put a membrane between the house and concrete. It's a must if you're going against brick or concrete wall.Will Crack you're walls if not done.

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    We haven’t had any issues with that on this project (it’s at my office) and it’s over a year old.

  • @iamric23
    @iamric233 жыл бұрын

    Awesome!! Can this be done over existing concrete?

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks! Yes we can also pour stamped concrete overlays. 👍🏻

  • @iamric23

    @iamric23

    3 жыл бұрын

    @@TimDCVA wow, I guess I'll have to buy your crew some airline tickets so you can fly up to Massachusetts and get stated.

  • @stegen9008
    @stegen90083 жыл бұрын

    hey I want this at my house. pls come and make it! I live in sweden and I will pay the ticket for you! xD

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Haha.

  • @jwchancey
    @jwchancey3 жыл бұрын

    How long after sealing is it safe to put furniture and items on the surface?

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Usually a day or two. Depends on the weather.

  • @ZaC87580
    @ZaC875804 жыл бұрын

    After washing off the release off with pressure washer. Do you have to reach with acid? I feel like there is still some release left over

  • @TimDCVA

    @TimDCVA

    4 жыл бұрын

    We don’t use a pressure washer unless it’s a really big job. We always use acid to get release off after we’ve rinsed it once.

  • @ZaC87580

    @ZaC87580

    4 жыл бұрын

    I see. It's a 20x 72 . But not sure if I should hit again with pressure washer or acid

  • @jamese9283
    @jamese92832 жыл бұрын

    How did you clean the spatter off the painted siding next to the patio?

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    We pressure washed it and then painted over it. It’s our shop and we planned on painting the entire building before we started the project.

  • @Carlos-wy1jx
    @Carlos-wy1jx2 жыл бұрын

    What size of brick jointer is that? The one used to make the lines more noticeable

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    We have two. One looks like a bull horn that goes from about 3/16” to 3/4” The other one is an S tool that has 1/2” wide joints.

  • @jasonrussell7085
    @jasonrussell70853 жыл бұрын

    Now I can go from normal to middle class lol. Thanks man!!

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Ha. 👍🏻

  • @IslandNassau
    @IslandNassau3 жыл бұрын

    How soon after pouring the mix can I start stamping How long should I wait

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    It’s different on every job. You have to wait until after the bleed water is gone.

  • @aler4993
    @aler49933 жыл бұрын

    Nice job! Where did you get those stamps??

  • @TimDCVA

    @TimDCVA

    3 жыл бұрын

    Thanks! Increte Systems stamps.

  • @mommaoinnh2674
    @mommaoinnh26742 жыл бұрын

    How long from pouring the concrete do you do the stamping process?

  • @TimDCVA

    @TimDCVA

    2 жыл бұрын

    It’s different for every job. Anywhere between 1-3 hours.

Келесі