HOW TO FLOAT GEARS IN AMERICAN TRUCK SIMULATOR - PEDAL CAM, SHIFT CAM AND THE WORKS | TUTORIAL

Ойындар

#ftgunited -
🔰teespring.com/stores/fulltill...
🔰Interested in driving for FTG UNITED LOGISTICS? Fill out an application here : trucksbook.eu/company/41827
🔰USE CODE FULLTILLED10 TO receive 10% off a purchase of the ASP Button Box
www.advancedsimulationproducts.com
🔼JOIN THE DISCORD - ​ / discord
🔼BECOME A MEMBER AND SUPPORT THE STREAM - / @fulltilledgaming
🔼INTERESTED in HIGHEND PREPAID GAMESERVERS and SUPPORTING THE CHANNEL? Visit my affiliate link 🔼 nitra.do/FullTilled through NITRADO and sign up. Got questions? Feel free to ask.
🔰Want to know what's in my SETUP? Want to buy exactly what I have? I'm now an AMAZON AFFILIATE so everything you but from here 🔼www.amazon.com/shop/fulltille... 🔼 gives back to the channel with no additional cost to you!!
________________________________
▶Superchats - FTG 70% YT 30%
▶PayPal - www.paypal.me/FTGames
▶Streamlabs - streamlabs.com/fulltilledgaming
________________________________________________________________
See my PC Specs here - • FTG's DigitalStorm PC ...

Пікірлер: 291

  • @b9bot148
    @b9bot1484 жыл бұрын

    Okay I got a tip for anyone running the G29 or maybe anything else . I was not able to float the gears no matter what RPM in my setup . So I went back to Options then picked controls. In controls I scrolled down to H-Shifter Setup. Shifter layout setup I changed mine from simple to Advanced. Below that I changed the Shifter fast split from never to clutch or throttle. I then went back into ATS to drive and bingo I can now float the gears and the gear changes up and down. So I hope if anyone else can't float the gears give this a try to get it to work.

  • @serpanol

    @serpanol

    4 жыл бұрын

    Thank you i have tried many times and could not get it to work "" G29 "" got to the point i was considering upgrading to TH8A but will give this a shot

  • @serpanol

    @serpanol

    4 жыл бұрын

    It work it works ty ty

  • @b9bot148

    @b9bot148

    4 жыл бұрын

    @@serpanol HI I was going to reply after reading your message that buying another shifter wouldn't help. I actually bought the Thrustmaster THX shifter and was not able to float gears until I did the above after watching FTG. That confirmed to me there was something else going on. Glad it works!

  • @christophernunez3403

    @christophernunez3403

    4 жыл бұрын

    Lol. I have the g27 and I was floating gears way before anyone knew you could on the game. And yup that's the set up I've always had cuz that's the closest to a real truck. Always works. Do that first and you'll be able to float gears you can also flare up the rpms by taping the gas pedal while in N in between shifting. As in your in a gear and need to catch the next one shift to N then tap the gas twice then shift and as the rpms fall the truck will catch the next gear

  • @RoadRunner-yu8cu

    @RoadRunner-yu8cu

    4 жыл бұрын

    does this work for the TH8A? i can't float the gears no matter what i do

  • @blkdeath
    @blkdeath4 жыл бұрын

    As a former RL driver you are doing amazing for not having the actual feel of shifting. We mainly go by sound and not RPM indicator but not sure that works the same in game as I use a controller. Like you said in the vid, different trucks ALL have a different groove to em 'cough' Mack 'cough'....lol. When I first started watching I thought you were a RL driver teaching ATS people how to float and when you said you don't know how it is in RL I was shocked. You'd be a champ! I used to always say this to my fellow Mack drivers at the time, the clutch is for First and reverse.....that's it...lol. Side note, I applied for a rear loader Mack ready mix job once and before I got in the truck, the guy evaluating me said " if you use the clutch after first gear, you're fired....simple as that. I laughed at the time since I drove a Mack for years, but I could imagine a new drivers horror in hearing that lol. Edit: @ 18:21 you sure you're not a real driver? lol that tailgate stop is textbook...lol

  • @ericl1627

    @ericl1627

    3 жыл бұрын

    He does do alright and your right flossing in ATS is a pain as no feel.

  • @luisbarrios4430

    @luisbarrios4430

    3 жыл бұрын

    How do you think shifting in ATS compares to real life? Just curious haha

  • @ThunderingDiesel

    @ThunderingDiesel

    2 жыл бұрын

    @@luisbarrios4430 well ig irl you can actually feel tension on the shifter, when u hit the correct rpms it goes right in when floating, thats my guess I haven't actually droven one irl yet

  • @phao3093

    @phao3093

    2 жыл бұрын

    So true lmao.... macks definitely take some getting used to.... I had a mack that would not shift unless you were between 1800 and 2000 rpms and if the Jake brakes were on it was almost impossible to upshift before the rpms dropped too low.... I've never driven on one of the simulators before, It would be so weird driving without the engine vibrations, rattling dash, air seat swaying sideways or the feel of the shifter and whine of each gear through the shift knob...... there can't be anything like the fear of a missed downshift right before cresting the top of a hill and having to guess which gear based on the speed you're moving while that speed climbs.

  • @brandonmiller7466

    @brandonmiller7466

    2 жыл бұрын

    Each engine has its own sound to listen for. 855/n14 Cummins it's a bit of a burble but the old 2 smokers you wanted it to be rapping out. Never had the displeasure of a big yellow fuel chugger.

  • @williamyoung2955
    @williamyoung29554 жыл бұрын

    Jamaican shifters- “ hold my 18 speed”.

  • @redline350zHR

    @redline350zHR

    3 жыл бұрын

    💀💀😆😆😆😆 BRUHHHH this comment had me deadddddd

  • @flashmacro1823

    @flashmacro1823

    3 жыл бұрын

    😂

  • @Zsullivan27

    @Zsullivan27

    3 жыл бұрын

    🤣 🤣🤣🤣🤣

  • @Adam-bb9rm

    @Adam-bb9rm

    2 жыл бұрын

    Personally the Jamaican style of shifting is a lot of strain on the transmission cause you are rushing everything. Granted it sounds good. But these trucks are not for racing

  • @zdizzle9423

    @zdizzle9423

    2 жыл бұрын

    Sugarfoot real og

  • @brwsamurai
    @brwsamurai2 жыл бұрын

    I love how much complexity u can add to the ATS experience with those details. Thanks for the tips man. btw force feedback on the gearbox would be amazing!

  • @christianweis8721
    @christianweis87214 жыл бұрын

    I learned to drive in a Mack Rd800 hauling coal in WV. I never got ahold of double clutching before I left and went underground to work, but I did learn that the clutch is just to take off or go in reverse lol. I floated everything and it’s a whole lot easier in a real truck you’ve got a feel for when the gear is ready to change. It’s hard to go by sound in an old coal truck too with no rpm gauge 😂l

  • @erick5598
    @erick55984 жыл бұрын

    Floating like a pro. Also liking those new pedals!

  • @olemansailor6519
    @olemansailor65199 ай бұрын

    At time 10:52 When the front end is bouncing on takeoff from a complete stop, it's normally from a worn clutch or because the mechanic left a fingerprint on the clutch or pressure plate when installing the clutch. Lots of people don't realize how important it is to keep everything perfectly clean when doing a clutch, pressure plate or even disc brakes. Sometimes it can be caused by not using a torque wrench and it causes the flywheel to warp. When you were talking about not being sure what to do below 20 mph, I slow down to almost a stop early shifting down 3 or 4 gears at a time if I am making a fast stop, aiming for a stopping place maybe 25 feet before the white line. Then I don’t stop completely, I let the truck roll very slowly until the stick slips into whatever gear I want to take off in, then press in the clutch and stop the truck. That way you don't get any gear grind putting it into low to take off. I always shift with a gentle pressure on two fingers. Up or down doesn't matter. If you have to pull it out of gear then wait another second or two so the rpm and truck match and the shifter will slip into neutral like butter and into the next gear as well. When teaching others to drive I give them 3 pieces of advice. 1. When doing ANYTHING in a big truck, take your time. Relax. Big trucks don't move fast so don't force them. Slow and smooth. If you break anything you will be out of work until it's fixed or driving a POS loaner truck that everyone hammers on. 2. Always use all the real-estate available even if you don’t think you need it. I hate seeing people pulling trailers over curbs or dropping them into ditches. When running heavy, curbs can pull tires off of beads. Ditches when running heavy can roll your trailer which in turn can roll your tractor. 3. Never back up at an intersection. NEVER. It doesn’t matter if it’s in heavy traffic or not. You never know what the idiot in the 4 wheeler is going to do. They may act like they are going to help you out, but then at the last second they pull up or to the side and you wind up pulling a trailer over them. Pull up where you are supposed to be and let THEM move. Just stay legal and if it comes to it and a cop arrives, he will MAKE THEM move. Ignore the traffic, the cursing and the sign language and STAY IN YOUR TRUCK. You have an air conditioner and a radio. Just relax and wait them out.

  • @b9bot148
    @b9bot1484 жыл бұрын

    I love these tutorial videos FTG, thanks. I can now float gears whoop whoop!

  • @90cat1
    @90cat12 жыл бұрын

    All Manual transmission Semi's you have to use double clutch (unless you float the gears of course). and when it comes to downshifting, you want to make sure you are in a gear that will allow you to go when you accelerate if the light turns green before you come to a stop. If you are coming to a stop sign stopping 6th or lower.

  • @hicksydawg5228
    @hicksydawg52284 жыл бұрын

    @fulltilledgaming we haul dozers irl an the key is keep ur revs high even when going down but its more key going down that u don’t shift to late others it is too hard to get back into a gear. At least thats wat we find with our kenworth T650.

  • @xtalonxdeslauriersx
    @xtalonxdeslauriersx4 жыл бұрын

    On the kw t660 Cat motor 18 speed I like to up shift at 16 down shift at 11. I have little to no issues floating but I’m being made to double clutch and that’s a pain in the but. Also when combing to a stop I was always taught to never be out of gear. Stop in 4th with the clutch in and find second once the truck has stoped

  • @b9bot148
    @b9bot1484 жыл бұрын

    Gonna try it out and see what I can do.

  • @almendomortin2492
    @almendomortin24924 жыл бұрын

    Hey loving the video bro...just wanna share a small details with you... Remember if you miss a gear, don't gear down..gear up instead

  • @mposter3138
    @mposter31382 жыл бұрын

    This was easier than I thought! Practice makes perfect.

  • @HigerHunter
    @HigerHunter4 ай бұрын

    as someone who has limited driving manuals irl to only learning how to drive manual crane trucks because of my job, i shift with feel of the transmission, put a little pressure on the shifter and it will just pop into place which is nice. It is indeed a lot harder to do in video game than irl.

  • @gearjammer89
    @gearjammer894 жыл бұрын

    If you want to add an extra element of realism to floating, go in the console and set g_hshifter_synchronized 0 and it will force you to match rpms even when using the clutch just like it would IRL.

  • @ghostnkc7444

    @ghostnkc7444

    4 жыл бұрын

    That's exactly what I did. I haven't been able to go back to a syncho since I did that.

  • @zacharybishop6595

    @zacharybishop6595

    3 жыл бұрын

    @@ghostnkc7444 I actually appreciate non synchronous gear boxes now. When I go to play a different driving game that requires me to use the clutch I'm like "Ugh I actually gotta do that?" Lol.

  • @ToreDL87

    @ToreDL87

    3 жыл бұрын

    @@zacharybishop6595 With normal transmissions that has helical cut gears & synchro's you dont wanna do that, they need the clutch pushed in to take engine load of transmission and help synchro's slide in place.

  • @chexlemeneux8790

    @chexlemeneux8790

    2 жыл бұрын

    No way ... I was sitting here just finding out you can actually hook up the fifth wheel and have sim air brakes ... now I find out this... Im not gonna need a new game for a long time.

  • @danielrobards7894

    @danielrobards7894

    2 жыл бұрын

    @@ToreDL87 actually if you get your revs right plus the right timing with the stick you can drive synchro without the clutch. I drive a truck with a power assist Eaton fuller for work without the clutch and its synchro and i tend to fuck up when using the clutch

  • @MaxFluff
    @MaxFluff4 жыл бұрын

    man this truck has a nice interior

  • @hammermike1871
    @hammermike18714 жыл бұрын

    Another great video FTG and keep up the great work

  • @TheHelix123
    @TheHelix1234 жыл бұрын

    My 389,Th8A shifter and the open road with no speed limits perfect.

  • @deafoldgit
    @deafoldgit4 жыл бұрын

    good job buddy! not many trucks you have to use double de clutch anymore maybe on a heavy haul you might, most UK truck are now all coming auto and you pay extra if you want a manual, but you think its slower to float the gears but its much smother and you dont come to a full stop many time, in real life if you are in traffic on the motorway sometimes its best to follow the truck lane as they want to keep moving so its less stopping! 👍🏁💜

  • @collinmc90

    @collinmc90

    3 жыл бұрын

    I swear just cruising in the right lane(IRL), not worrying about passing people or getting ahead (almost) always pays off, very often I end up passing the same cars that passed me 10 or 15 minutes ago when we reach a light or round about and I was able to drive safer and more efficiently.

  • @vinceschannel8927
    @vinceschannel89274 жыл бұрын

    That truck is gorgeous 😍😍

  • @gamertastic1527
    @gamertastic15275 ай бұрын

    Many people when they set up the setting are just using a shifter with no range finder or anything the easiest way the float gears is to change your shifter setting to a 18 speed or whatever transmission u want then u have to clutch to start and u can float whenever

  • @timoftedahl956
    @timoftedahl9564 жыл бұрын

    Great job. I used to run a 98 Kenworth w900 with a 6NZ cat in it and always found between 1500-1700 was the sweet spot for me

  • @redline350zHR

    @redline350zHR

    3 жыл бұрын

    why not redline it if its just a game? im serious like how does this work...you have to do everything PERFECTLY??

  • @timoftedahl956

    @timoftedahl956

    3 жыл бұрын

    @@redline350zHR I was talking in real life. Never played ats

  • @justinbarber24
    @justinbarber244 жыл бұрын

    That was sooo cool seeing my city name on a sim game. Yuba City Marysville baby.lol

  • @ericl1627
    @ericl16273 жыл бұрын

    For starters let me say much better. Your right about alot me I never look at rpm. Every truck it's differant the 2019 389 Pete I drive now loves slow shifts im guessing 400 to 500 drops. My old Pete357 I think out was liked a faster shift.

  • @yamahonkawazuki
    @yamahonkawazuki4 жыл бұрын

    ive driven irl, usually know when truck or really any manual trans vehicle is ready to float, you feel the engine stop making pulling power and just making noise, its usually willing to float.

  • @The101Point1
    @The101Point13 жыл бұрын

    Love that freightliner

  • @bikerboy3k
    @bikerboy3k4 жыл бұрын

    Awesome setup brother!

  • @tsepoza
    @tsepoza2 жыл бұрын

    I drive trucks for a living but I’m finding it hard to shift without the clutch on ats. Like you say there is no resistance or feedback on the gearstick in the game which is what I rely on to do clutchless shifting in real life. In real life when those revs match up good and you are applying a slight force on the gearstick it’s like the gearshift gets taken or snatched out of your hand into the next gear. Very cool video though, I’ll keep practicing until I get it like you.

  • @airbus-a330

    @airbus-a330

    5 ай бұрын

    im tired of holding the wheel but wanna start playing ats and was wondering how it translates lol. good to know.

  • @johnlemasters672
    @johnlemasters6723 жыл бұрын

    What are you using to be able to see left right up down by turning your head. Thank you

  • @wattie60
    @wattie602 жыл бұрын

    Hey. Nice video. I still need some training to float gears so smooth. I would like to know what are the mod name that allow to add a GPS-like device with dashboard infos (fuel consumption, cruise control...) at the bottom left of the windshield and the one with the GPS at the upper part please ? Thanks

  • @LobbsTrucking
    @LobbsTrucking4 жыл бұрын

    Well needed video

  • @robertgardner4508
    @robertgardner45083 жыл бұрын

    IRL you don't fully pull your foot off the gas when floating gears, or most cases the transmission will not let you go into gear, and you'll have to cram it in and damage parts. You only lift off the gas enough to bring the RPM's down around the 1,500 area in most trucks and eaton transmissions, and you'll be able to gently float gears and you push back on the throttle. You never fully take your foot off the gas, you only lift off enough to drop RPM's.

  • @robertgardner4508

    @robertgardner4508

    3 жыл бұрын

    But this is a game and they did a pretty damn good job, I love floating in both IRL and in game.

  • @thegamehud8214
    @thegamehud8214 Жыл бұрын

    how are you moving the camera side to side? I'm curious because I want to use it for my setup. just so I know what to look for to purchase it.

  • @heathjessup1308
    @heathjessup1308 Жыл бұрын

    Is the shifter in the cab apart of a truck mod or can you get it in other truck models also how how you set up you’re head tracking

  • @ezloot4u433
    @ezloot4u4332 жыл бұрын

    Where did you get the digital display on the bottom right? Thank you

  • @laurinjoelschafhausen
    @laurinjoelschafhausen4 жыл бұрын

    Great video and overall content. Do you have a video up explaining your shifter mods. Planing to get my shifter from the table to the floor as well and help would be greatly appreciated. 👍🏼

  • @FullTilledGaming

    @FullTilledGaming

    4 жыл бұрын

    kzread.info/dash/bejne/g6iMls2yo7HXlNI.html

  • @dreamingsvlegacy4610
    @dreamingsvlegacy46102 жыл бұрын

    Looking for alittle help, using my shift i am trying to float gears but when i git to neutral my truck slows down like breaks are on, is this just a setting?

  • @anthonywitkowski1782
    @anthonywitkowski17824 жыл бұрын

    Is there a didgiital type of device that shows our taqometor and which gear we are in?

  • @tommywachinski1434
    @tommywachinski14343 жыл бұрын

    I need to know... how did you get the Easton Fuller shift knob in the truck in the game?

  • @stefano182
    @stefano1823 жыл бұрын

    What wheel and shifter are you running?

  • @dasp125
    @dasp1254 жыл бұрын

    With the range selector (front switch), do you flip it up before going into neutral then into next gear or neutral first, flip the range selector up then into next gear? Thanks, Mike.

  • @Khano94

    @Khano94

    4 жыл бұрын

    Hey mike, I'm not sure if it applies for ATS but whenever I'm driving I'll always preselect the range so if I'm in 4 (bottom box) I'll select the high range box once I get into 4th so when I go for 5 or 6 I won't have to worry about what box I'm in

  • @ToreDL87

    @ToreDL87

    3 жыл бұрын

    @@Khano94 I like to flip it just before I switch from low to high, it doesn't apply in ATS but IRL the preload of both range & split puts wear on the transmission the longer it's pre-selected. Have seen pics of the internals of a real Eaton where split & range had been pre-selected for too long for too many times between low & high, throwouts were ground halfway off, gears were a mirror sheen (due to the metal wearing off the throwouts) and cracks were developing on bearing ladders on the transmission casing.

  • @christopherpawlychyn3146
    @christopherpawlychyn31464 жыл бұрын

    Cool video

  • @NICK_KIRAK
    @NICK_KIRAK4 жыл бұрын

    Thanks Bro.

  • @ps3player111
    @ps3player1113 жыл бұрын

    Damn.. you make this look so easy...

  • @vendetta1306
    @vendetta13064 жыл бұрын

    Nice setup man

  • @stevenminarchin5877
    @stevenminarchin58773 жыл бұрын

    Gotta go by the sound as RL truck driver that’s the only way I shift by floating for up and down but it’s all off sound

  • @feveredapollo4583
    @feveredapollo45834 жыл бұрын

    Hi ftg I am a huge fan I love all of your videos and your setup is my dream setup I am saving for one just like it... Can you make a video showing how to install mods from places other than the steam workshop and how to put them in the game

  • @OfficialGould5
    @OfficialGould54 жыл бұрын

    What’s your full steering setup? I like your setup and I’m thinking about getting one soon?

  • @nitrofrogg431
    @nitrofrogg4312 жыл бұрын

    This helps a lot, thank you. Question, I've read that I should change the h-shifter to asynchronized from synchronized in the console menu.......did you do this or is it needed? Newer to ATS and brand new to wheel and shifter.

  • @FullTilledGaming

    @FullTilledGaming

    2 жыл бұрын

    so all that does it require you to match RPM's even with the clutch. At some point with out any kind of force feedback, it becomes really difficult to do that. It's up to you. For me, floating the gears was enough.

  • @simulationnation3105
    @simulationnation31052 жыл бұрын

    Hi, I noticed that you are using head tracker. What head tracker are you using?

  • @esko738
    @esko7382 жыл бұрын

    do only a couple trucks have the shift knob in first person or is it a mod

  • @flix8743
    @flix8743 Жыл бұрын

    How does your camera move around with out you moving it?

  • @dane-my1qo
    @dane-my1qo Жыл бұрын

    That is really cool .I never seen anything that is this to teach people or a game?

  • @FullTilledGaming

    @FullTilledGaming

    Жыл бұрын

    Not in real life but it incorporates real life techniques and applies it to how the simulator see things. People ask me all the time how to float gears in game so I made the vid

  • @TheHumbleBiker
    @TheHumbleBiker Жыл бұрын

    Hey can you tell me how the in-game camera is moving according to your head? You are not wearing a VR so how is it possible ? 🤔

  • @michaelmurphy4686
    @michaelmurphy46864 жыл бұрын

    what kind of truck shifter do you have

  • @chrish4483
    @chrish44834 жыл бұрын

    I love that map but it really screwed up my Hwy 80 from reno to winnemucca and alot of other C2C routes.....any thoughts anyone?

  • @admiralsuarez6165
    @admiralsuarez61654 ай бұрын

    How do I get that rpm gauge mod you have on the right side of the screen?

  • @ryanwalters2371
    @ryanwalters23713 жыл бұрын

    @ 8:00 how did you get the really cool downshifting sound???? It was so cool and I don't know how you did it!

  • @revil3962

    @revil3962

    2 ай бұрын

    He just downshifted normally but pressed engine brake with it

  • @emailsemails1369
    @emailsemails13694 жыл бұрын

    Make a video on how all your setting are please , thanks

  • @JonahIsrael
    @JonahIsrael Жыл бұрын

    Wow just discovered this game. I wonder if I can use this for 18 speed training.

  • @X_Brandon_X
    @X_Brandon_X2 жыл бұрын

    How’d you get the tachometer on your screen? Is it a mod?

  • @jakester7102
    @jakester7102 Жыл бұрын

    So question what exactly are you using for looking around where when you turn your head it looks out the window that would be awesome to have for my set up if you have a link of what you have could you send it to me ?

  • @FullTilledGaming

    @FullTilledGaming

    Жыл бұрын

    Track ir pro

  • @schiggy3592
    @schiggy35923 жыл бұрын

    Hello, i really like this video ;) Can you tell me what truck this is. I downloaded the Freightliner FLC Mod, but can't get the interior to look like yours. What Mods are you using? I would be very greatful, if you could respond to this.

  • @ps3lanigan
    @ps3lanigan Жыл бұрын

    what is the name of the rim addon u have on your base?

  • @kentbyron1738
    @kentbyron17384 жыл бұрын

    You have a really cool voice DAMN

  • @alonzohannajr9259
    @alonzohannajr92592 жыл бұрын

    What simulator set up do you have

  • @jasonsfarm37
    @jasonsfarm373 жыл бұрын

    Anyone know what the average price is on a g27 I think it is shifter and where I could find one I’m not talking about the knob I can find one easily

  • @basslover352
    @basslover3523 жыл бұрын

    How did you get those amazing engine sounds? this one specifically

  • @nathanbrosh4589
    @nathanbrosh45894 жыл бұрын

    How do you get that dashboard at the bottom right

  • @TaxationIsTheft439
    @TaxationIsTheft439 Жыл бұрын

    What’s the best way to turn your hesd

  • @cardaleohardial2074
    @cardaleohardial20742 жыл бұрын

    For some reason my range selector and splitter isn't working. Does anyone have any suggestions on how to fix it??

  • @BrettBedard
    @BrettBedard Жыл бұрын

    What's the overlay that you are using?

  • @Paky31Ta
    @Paky31Ta4 жыл бұрын

    Hi how did you put the ets2 dashboard in the lower right corner? Could you send me this dashboards skin or link thanks!

  • @clutchtucker
    @clutchtucker5 ай бұрын

    Why do you press the clutch when stopping?

  • @jacobrhyne3583
    @jacobrhyne35834 жыл бұрын

    What dashboard did you use?

  • @crobarwtf
    @crobarwtf3 жыл бұрын

    I just clutch in on half shifts because the instant gear change messes with the immersion. In reality it would air shift the same but in ats its just instant and I can't stand it.

  • @SireDragonChester
    @SireDragonChester4 жыл бұрын

    A good video as alway. Does anybody make force feed back gearshift? I’m using thrustmaster TH8a gearshift with Logitech g29. While happy with both. Wish steering wheel was bigger. Do wish gear shift had force feed back. Prob not cheap, esp here in Canada. I wish they come out with new game and or somebody basically take ATS and do new game with better Physics and force feed back features. Truck slide on payment. Real weather conditions. Real maintenance, (Oil change etc) and if you miss maintenance, it can have real physical effect on all your truck. Real engine Physics/HP/torque, missing too many oil changes would reduce Power cause issue. Break downs, over heating engine/brakes and turbo should all happen. They should also have full truck garage where do maintenance and upgrades. Few times been loaded over 100,000 lb or more and got stuck on off ramp. In Bo low and still could NOT get the truck too move. Which was pure bullshit. Consider my Kenny was setup up heavily loads, full Eaton 18 speed Tranny and Cat 625 HP engine. But ya really Long for good truck game that has real Physics and you can actually take damage ti engine/pistons/turbo when you don’t do proper maintenance. Which include doing oil changes and grease up and what not. And missing maintenance can have consequences like real life. Yeah the dev need to hire REAL IRL truckers. Good video though. I need also try this more and learning how float gears better. But thanks man. Maybe one day they actually do ATS2 with newer game engine and hopefully updated physics/sounds and graphic. Would love see ATS with path tracing. But thanks for Video man. Are you still using same engine sound mod? Sound fairly good. Most sound mods I tried all sound like ripped/copied from KZread or from garbage truck. RL Cummings/Cat engine both sound different imo. As somebody grew up on farm, we had farmer with grain bin near by, I got use hearing his big truck on our road and got ride with him few times. But good video man. -- Rant warning lol - Engine and turbo sound for default game are Soooo Horrible imo. They need go actually record real audio of Cat engine sounds/ Cumming etc and Volvo engine sounds. It’s Strange Pete with Cat engine sound different then in Kenny. While their would be slight changes of sounds. It still should sound like a CAT or cumming imo. WHY hasn’t somebody who actually drive trucks /and or work on these engine actually and done ACTUALLY recorded IRL engine sounds using High quality Mic (blu Yeti etc or better) I swear almost 90% sound/engine sound mods are all Copied from same dam sound, like its from Garbage truck or copied off KZread video. You should PLEASE do shout on one your streams out For ATS fan/ Truck mechanic/somebody too ask him/her please go record actual engines sounds of different engines. None this BS copying found sounds off the web. Ask for somebody that has access to IRL engine sounds. Get actual REAL life recording these engine sounds with laptop and decent mic. AND/Or get the ATS community to bug ATS devs to go do REAL IRL engine sound recording please, then offer it as DLC. Id before happy pay for the Sound pack DLC if ment getting better IRL sound recording. (Cats/Cummins etc) Almost tempted do this myself. But I’ve never made mod or have working laptop, though I do have good Blu Yeti Mic. And I was part of indie dev team, they hired me as tech guy/moderator. Helped them for about 2 yrs, opened my eyes to game development. I wish still lived on farm cuz I could have asked our Neighbour when was not busy, if could record some sound recording of some his different trucks he owned.

  • @FullTilledGaming

    @FullTilledGaming

    4 жыл бұрын

    Hahah you just summed up pretty much what every ats guy is thinking

  • @FullTilledGaming

    @FullTilledGaming

    4 жыл бұрын

    Hahah you just summed up pretty much what every ats guy is thinking

  • @SireDragonChester

    @SireDragonChester

    4 жыл бұрын

    Full Tilled Gaming Thanks

  • @emiliovalenti2723

    @emiliovalenti2723

    4 жыл бұрын

    Sire DragonChester There will never be an ats 2 and I swear to god if they make one I’m gonna be phissed!!! Just bought all the map dlcs

  • @bear-nu2cs
    @bear-nu2cs Жыл бұрын

    Where can I buy that exact shifter extension?

  • @IamAW
    @IamAW4 ай бұрын

    I tried doing this with 6 speed transmissions (still waiting for my truck shifter), and that's why I'm here. I'll tell you, it's not easy on a 6 speed. Also, what "real brand" mod are you using? You have different ads and brands than the mods I use for it.

  • @nightmareeclipse2331
    @nightmareeclipse23314 жыл бұрын

    My question is the long rod shifter a homemade extension or was that bought somewhere I have a feeling it’s homemade but I had the idea to do that a while back but never went though with it and if it is homemade are you using the thrustmaster shifter or the g920 shifter

  • @FullTilledGaming

    @FullTilledGaming

    4 жыл бұрын

    kzread.info/dash/bejne/g6iMls2yo7HXlNI.html

  • @nightmareeclipse2331

    @nightmareeclipse2331

    4 жыл бұрын

    Full Tilled Gaming ah ok might have to invest in a new shifter soon lol thank you for the quick response

  • @LeonardJackson
    @LeonardJackson Жыл бұрын

    On ETS2 I can pull out of gear without the clutch but when I try to put it back in it just stays in Neutral. I don't get a grinding noise or anything. Anyone know if there's another setting I have to use besides the ones where I choose the advanced shifting and my transmission type?

  • @FullTilledGaming

    @FullTilledGaming

    Жыл бұрын

    Try putting your shifting on complex instead of simple

  • @jonlewis9298
    @jonlewis92983 жыл бұрын

    Glad to see someone not shifting up every gear.... 3,5,7,9,11,13,15,17,18

  • @FullTilledGaming

    @FullTilledGaming

    3 жыл бұрын

    Hahahha 👍🏻

  • @ludvig_7115
    @ludvig_71154 жыл бұрын

    What graphics mod are you using? It looks super cool! And is your camera in game "following" your head. I noticed that if you looked right the camera in game also looked right.

  • @WhatsTheBiz

    @WhatsTheBiz

    4 жыл бұрын

    He's using trackir for the head movement

  • @RedneckMechanicsYT
    @RedneckMechanicsYT4 жыл бұрын

    What's your full setup. That's friggin awesome.

  • @underdogsciontc
    @underdogsciontc4 жыл бұрын

    Irl i lift when I float my gears on a water truck i was running

  • @KnowerofThings
    @KnowerofThings9 ай бұрын

    where did you get 350 -400 from the rpm stays 1000-1500rpm im so confused

  • @chrisxcross8884
    @chrisxcross88844 жыл бұрын

    Release fuel pedal and shift one two into next gear. Simple as that.

  • @wwmw51
    @wwmw513 жыл бұрын

    Can you make a tutorial on the ATS - Interior Driver Skin Making. There's one out but; it doesn't go into depth like you do in your tutorials. thanks

  • @FullTilledGaming

    @FullTilledGaming

    3 жыл бұрын

    I can try

  • @seanmurray9365
    @seanmurray9365 Жыл бұрын

    As a Truck driver in real life....the 1L/1H 2L/2H so on and so fourth is not really Low and High....its Direct and overdrive (or in trucker terms simply "over") but this game is still pretty cool and it gives a real perspective of how its like to be a trucker....of course theres nothing like getting up and doing it in real life lol but this is a close 2nd Id say :)

  • @unrulycj1671
    @unrulycj16714 жыл бұрын

    Actually it will slide because the weight is too light I carry 50 tones back and forth you can hear the brakes grinding when I try to stop

  • @mic8040
    @mic80404 жыл бұрын

    I keep the jake brake on all the time when I float gear

  • @Brozi
    @Brozi3 жыл бұрын

    I know, that's an old video, but I have a question. How did you moded your shifter, that it is so long?

  • @FullTilledGaming

    @FullTilledGaming

    3 жыл бұрын

    Bought an extension to fit the threading on the Fanatec shifter

  • @truckinnloggingnz830
    @truckinnloggingnz8303 жыл бұрын

    what if i want to make my gear changes longer?????.....

  • @realsimulator360
    @realsimulator3602 жыл бұрын

    Mantap

  • @jasonsfarm37
    @jasonsfarm373 жыл бұрын

    Anyone know where I can get a decent knob for a H shifter trying to build my setup and don’t know didly squat about simulator equipment

  • @ToreDL87

    @ToreDL87

    3 жыл бұрын

    There's a cheap one on Ebay made by autoparts_1 (I think).

  • @martingt3107
    @martingt31073 жыл бұрын

    What is the mod to show a manual shifter in the game?

  • @xavierjackson3796
    @xavierjackson37963 жыл бұрын

    hey ftg no mater what i do even when i match the rps i grind gears i have been practicing for a month and im still grinding gears

  • @mikek2824
    @mikek28243 жыл бұрын

    When I was watching this video it looks like when you turn your head it turns the camera in the cab how do you have that set up I don't see you moving a mouse or anything It looks like when you turn your head it turns the screen?

  • @doesnotplaywellwithothers3455

    @doesnotplaywellwithothers3455

    3 жыл бұрын

    Trac IR pro

  • @Thepossum04
    @Thepossum04 Жыл бұрын

    I cannot go up to 18 years in my trucks even with the 18th speed transmission shifternob please help

Келесі