Ik that you have made multiple videos of you sewing jeans together but you should make a turtorial on how to make just a normal pair of jeans or skinny jeans and show the whole process of what it takes to make a pair of jeans from scratch. I don’t find many turtorials that show in depth like your videos and that would be a god send for me cuz jeans are probably my scariest sewing project 🙏🏼🙏🏼🙏🏼

@anbentha

Жыл бұрын

I've already started on this vid, next few weeks I hope

@fernandocuevas7526

Жыл бұрын

Plzz

@duly2636

Жыл бұрын

@@anbentha ik it’s a late reply but thank you so much. I wanna make clothes for a future brand hopefully n u always gave me the motivation to make shit myself. Thanks again it means alot

Great tutorial, straight to the point but being very clear, thank you, i’ve been looking for a Good tutorial in a while

wow great video ... right to the point .. no wasted time talking about stuff I dont need to know .. just very well explained directions on how to do the flare in the pants .... one of the best sewing videos I have ever seen ... definatly the best on how to make a flare in pants ...

@AzylOkej

3 ай бұрын

thats true what a great video

All I wear are my own flare jeans. The method I came up with eliminates every unnecessary measurement and just makes it a 5 mins process. Only measurements I take is length and width of the flare. I flip the jeans inside out, split the jeans 20 inches in length, the width I use is 5 inches. I iron out the seams on their folds, I put some glue around the seam folds and place a big flare piece on top. I usually use cut up Jean pieces. Wait for the glue to dry and cut up excess fabric, then I just sew along the seams folds. Look exactly like some gallery’s. Very simple process, might seem like a lot but I be creating flare denims with ease

Really good instruction- better than any I've watched for flares - thanks!

I actually really love the subtle color difference between the flare and the jeans.

Watching this video after already making my pants to see if there's anything i can do better next time. Happy to learn some new tricks!

Great video as always. I’d just like to mention that as far as I know gallery dept almost exclusively uses 501s for these so if you’d like to be as close to gallery dept as possible I’d recommend using a pair of Levi’s 501 jeans.

fire tutorial bro, gonna make some flares rn!!

this is very clearly explained!

YESSSSSSSSS thank youuuu.

Excellent! Thanks!

You’re a goat, I hope the vibes get returned

Damn you are a hidden gem!

u always doing good shit

Could you do a video on garment dyeing? If you could touch on the topics of sun fading or even distressing softer material like jersey knit I would appreciate that.

@anbentha

Жыл бұрын

I will add that to the list, thank you.

another W vid

Thanks for the video, it was very helpful

Tony schooled everyone on that stage.

can you try to make ends.rp (ends repair) denim?

Can you do a tutorial on how to make cargo pockets?

@anbentha

Жыл бұрын

I'll try to do something like this soon.

My goat

Are you using a straight stitch for the top stitch on the inseam flare???? btw great video im in the process of making some right now

@anbentha

Жыл бұрын

yes, it is just a straight stitch, and thank you.

great video, have you made a flare jeans cutting a big ass jean? like instead of adding denim you could remove some and make a shape, do you know the name of that technique? 😵‍💫

@anbentha

Жыл бұрын

I know what you are talking about, I have never done it but I think it would be called rebuilding or something.

Can I do the same flare on the inside that you did on the outside or will it affect how the jeans look ? Because I didnt want to flare it all the way around on the inside but im not too sure if it will work otherwise

@anbentha

6 ай бұрын

It depends on what the existing seam is on the inside, as long as it's not flat felled then yes.

can you change the flare paints back to normal jeans with the same design?

@anbentha

Жыл бұрын

Yes, you would just do these steps in reverse.

i dont understand whats the seam allowance??? whats the purpose of it??

@anbentha

7 ай бұрын

It is the fabric that is past the stitch that is not visible from the outside, It does not change the way the pattern fits but is necessary so that the stitch itself has something to hold onto. You Can not sew right on the edge of the fabric or else the seam would not have any fibers of the fabric to form a stitch around.

I didnt even know anyone made jeans without side seam top stiched... Ir did you just seam rip those too? I am customizing my jeans but there is side seamallowance top stiched and it giving me trouble to sew my new pieces to the sides...

@anbentha

9 ай бұрын

most of the time the outseam will be chain stitch or safety stitch, I've seen twin chain before but it is rare and usually only on workwear. If you have that you will probably have to use another pair of jeans. If you are talking about the inseam then that is common, just break the entire seam.

I’m ngl you lost me in the inseam flare bro, so I make the panels WITHOUT seam allowance? And then when I go to stitch I’ll just do like 5/8(or any stitch)on each side and that’ll be the allowance or???

@anbentha

Жыл бұрын

draft them to the dimensions that you need and then add it, you can do whatever as long as the flare piece ends up the same length as your entire inseam measurement.

i opened up my denim to do more repair to the jeans and need help resewing the outset back together any tips ?

@anbentha

Жыл бұрын

iron flat the previous allowance and sew it back together with a straight stitch, iron it again when you're done.

@user-ez9ng1xw7r

Жыл бұрын

@@anbentha i appreciate it

Can this work with sweatpants also? And if it does what if it has this tight fitting at the bottom of it and if I can turn it into flare?

@anbentha

11 ай бұрын

It can work with almost any pants. For the tight fitting area at the bottom it depends on how it's done, if you have a separate piece of ribbing or something you'd have to remove it and replace the area with new fabric. If the hem of your pants is elasticated then you can just remove the stitching and unfold the elastic out of the hem.

@MoneyBagD855

11 ай бұрын

@@anbentha thanks

@user-nr5xp6yd8z

10 ай бұрын

@@MoneyBagD855 yo bro julius made a video about that, "flared sweatpants" i think it was called, he explains how to do that part at the bottom there

bro what do u mean with signing on and off at a stich?

@anbentha

8 ай бұрын

You have to stack a few stitches whenever you start or end a seam, just go back and forth, if you can't pull it apart by hand then it should be fine.

How do I sew it without going through both sides?

@anbentha

5 ай бұрын

you need to take apart the pants, the machine sews through anything under its foot

☇

VERY interesting. But for heaven's sake: SLOW DOWN YOUR SPEECH. that part is AWFUL.