How to fix window on Audi A6

Тәжірибелік нұсқаулар және стиль

You can buy the part here: amzn.to/3m4j5R5
If this video helped you fix your problem and save some bucks, then support our channel! Any size donations are welcome!!! Its simple and quick just click the link and select amount.
www.paypal.me/GarageBoysSupport
Or check my store here:
/ @garageboys
Don’t miss the chance to be a proud supporter of a good cause!
Also like and subscribe
-----------------------------
This video will show you how to fix the window on a Audi A6. in the video we are working on a 2001 Audi A6 but this should work on any Audi A6 between 1998 - 2006
the average time for this fix is about 35min. and the tools required are the following:
flat head screwdriver, phillips screwdriver, Torx T45, Torx T25, Torx T20 and a skinny screwdriver just to push a cover off.
you will need to replace 2 plastic parts on each window to fix the issue.
part number is # B0-837-463-B
you can copy and paste the part number on google and purchase it online or try the dealer they carry it for $27 each
if this helped subscribe to our channel
for Business inquiries email me at: Garageboys281@gmail.com
Disclaimer: Due to factors beyond the control of GarageBoys, I cannot guarantee against improper use or unauthorized modifications of this information. GarageBoys assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GarageBoys recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GarageBoys, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GarageBoys.

Пікірлер: 43

  • @dcedition1992
    @dcedition19923 жыл бұрын

    Thank you so much for this informative video. It really saved me a lot of time - and money, thanks to your tip on sourcing the clips from an eBay seller instead of the dealer.

  • @Stevejawel
    @Stevejawel5 жыл бұрын

    Thanks for showing this. I 3D printed the part and used it on my Audi A3. The window can close fine again.

  • @superdannyj

    @superdannyj

    3 жыл бұрын

    Yes!!! My a3 window goes down and mostly up and makes a cracking sound I think this is what’s wrong with it. I was also hoping to 3D print my own replacement on my ender3 was it the same as the a6 or different ? Do you have a thingyverse link please

  • @GajderStudio

    @GajderStudio

    3 жыл бұрын

    Do you have a project of this part so I can 3d print it too? Please!!!

  • @stefankuhlman3477

    @stefankuhlman3477

    3 жыл бұрын

    @@GajderStudio www.thingiverse.com/thing:1057567

  • @PauloC601
    @PauloC6014 жыл бұрын

    great video, fixed in my AUDI A3 8L1, its very much the same as in this video.

  • @ndmso
    @ndmso5 жыл бұрын

    Well done and easy to watch! Thank You!!

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    I’m glad I was able to help!

  • @youtamimitube
    @youtamimitube5 жыл бұрын

    Thank youuu i fixed my car by your video 😍😍

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    I’m glad we could help! Please help us back by subscribing

  • @jeffmorse1786
    @jeffmorse17864 жыл бұрын

    good job. did it without a problem. much thanks!!

  • @GarageBoys

    @GarageBoys

    4 жыл бұрын

    Awesome! If you can please like and subscribe

  • @xavierlucas8598
    @xavierlucas85985 жыл бұрын

    Great video. I fixed my window this week end. It works fine. Thanks.

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    Im glad I was able to help! If you can, help back by subscribing and liking :-)

  • @ndmso

    @ndmso

    5 жыл бұрын

    will you fix mine :) haha

  • @nikola121988
    @nikola1219883 жыл бұрын

    Thanks wery much you help me a lot!

  • @mickeydee9834
    @mickeydee9834 Жыл бұрын

    To ease the installation of the carriers you might want to move the "tabs" on the cable up in the frame a bit by raising the window an inch or two. Obviously the window won't move but the carrier tabs will move away from the wheel at the bottom of the frame. Trust me it will make sense when you attempt to attach the carriers.

  • @bfreehill

    @bfreehill

    Жыл бұрын

    was going to suggest the same thing, even an inch helps a ton.

  • @madalinmihai7270
    @madalinmihai72702 жыл бұрын

    Nice one lad!!!!✌️

  • @lucasduck95
    @lucasduck9511 ай бұрын

    Is it necessary or recomendable to disconnect the battery while disassembling?

  • @ItalianTiger955i
    @ItalianTiger955i5 жыл бұрын

    Thank you for the video, i liked so much, just a pity that you didn't show how to insert the two new pieces and how to put back the frame in the door

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    I’m sorry, I decided not to because it’s the same process but in reverse. I just wanted to keep the video short for my viewers

  • @ItalianTiger955i

    @ItalianTiger955i

    5 жыл бұрын

    @@GarageBoys anyway is a great and ultra useful video! Next weekend i will take my notebook close to my car and i will try to follow your steps. Tnx again. Grazie

  • @magnusfrankklaris2464
    @magnusfrankklaris24643 жыл бұрын

    My Window Will only Close about half, could the fix In your video also fix that? Or is it only if it wont go up at all?

  • @liviuiftode5418
    @liviuiftode54184 жыл бұрын

    Next time try to do it during the day 😉

  • @josephphillips9511
    @josephphillips95119 ай бұрын

    Where do u get a new wire from

  • @unfknknown9678
    @unfknknown96784 жыл бұрын

    Really wnana try this but I'm worried il fuck it up lol

  • @codefitness
    @codefitness3 жыл бұрын

    Will it work on 2008?

  • @valhheri3830
    @valhheri38305 жыл бұрын

    Any idea does these parts fit into back doors too? My a6 c5 allroad back window goes down but wont come up...

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    Not sure, you can call the dealer and ask for your part number and see if it matches this one or you can remove yours and compare it to the one I have on the video.

  • @Endriuu07
    @Endriuu074 жыл бұрын

    What does rear window repair look like? Is it the same?

  • @GarageBoys

    @GarageBoys

    4 жыл бұрын

    should be about the same

  • @emils147
    @emils1474 жыл бұрын

    But I removed my motor and turned switch on but it turns only one way even tho ai pressed button both ways. I but in new motor and the same problem.

  • @runar500
    @runar5004 жыл бұрын

    I ordered parts on ebay to do this job, the wires are not the right ones. -anyone got the correct parsnumber, please? Thanx

  • @GarageBoys

    @GarageBoys

    4 жыл бұрын

    I don’t have the part number for the wires but call your local dealer and ask them. They will give you that information in minutes

  • @vortire6040
    @vortire6040 Жыл бұрын

    Biggest issue I had was breaking my window on something 😭

  • @harinat
    @harinat5 жыл бұрын

    Thank you very much. In my car it is rear driver side door. Is part number same for rear left door also (B0-837-463-B )? Thanks

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    It should be the same, but what you can do is call your local Audi dealer and ask them. They should give you the correct answer within minutes

  • @Phoenix-kp8yq
    @Phoenix-kp8yq5 жыл бұрын

    dude part number is : 4B0 837 463B

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    Well I got my part number straight from the Audi dealer. Look at the invoice @min 1:28

  • @Phoenix-kp8yq

    @Phoenix-kp8yq

    5 жыл бұрын

    the 4 before the B in previous column is belong to part number. just last week got the part from audi Germany ( I have the same car ) and thanks for sharing )

  • @teejay6139
    @teejay61395 жыл бұрын

    Lol..u went on eBay. U definitely get wet u pay for. Those aren't going to last, we can see the extreme low quality of the plastic mould when you show it in video. I've been replacing these for many years, I ***ONLY***use the expensive dealer ones. There's none better

  • @GarageBoys

    @GarageBoys

    5 жыл бұрын

    Mine are still working fine no issues, but thanks for your input

Келесі