The soldering was tough but I was able to fix it with your video, thank you bro🙏

Crazy to find a video like this and it’s exactly what I was looking for, for my brz since they use Toyota’s climate control

رائع عمل مذهل وتصوير ممتاز شكرا

Thank you soooo much!

Excellent video😮

So, my AC/heat knob stopped working and my mechanic does something twice a year that simply toggles between heat and AC, and he never charges me. I'm trying to figure out what he does, as I don't think it's quite this involved. Great video!

V nic👍🏻

Can the fan speed dial be fixed or should I buy a new one?

👌

OK, I'm a bit stuck. I snipped off that brass coupler and on the left side of the wire, three tiny horse-hair sized pieces are no longer with the rest of the wire. No bueno. That's the first issue. The second issue: I don't think I gave myself enough slack. How much more sheath can I safely cut away before the cable will no longer reach the control panel? I have NO CLUE what I'm doing. I just don't have the money to get this thing repaired...could use some guidance. Perhaps if I trimmed it back a bit and made sure the wire was long enough, I could cut away the frayed bit? Thing is, I don't know how far back it is frayed. It may have even been the cause of the malfunction: three bits of wire may have detached somewhere inside and caused the thing to go "SPROING!" I don't know.

Sir nice video....do you have any repair shop that i can go

Güzel bir video benimkinin sorunu aydinlatma isiklari yanmiyor yeni bir video cekme imkaniniz olsa fena olmaz

@lahistech could I get away with just sodering the copper wire and not adding the melted other wire to it?

@turbodog99

2 ай бұрын

Solder is the addition of the "other" wire, the solder. So, NO, you can't.

Dont try this as a beginner.guarenteed you will snap clips.etc good luck

Guys, do not try this by yourself. My cable was exactly damaged like this and I did exactly how this guy repaired the cable but the problem is not because of the damaged cable the problem is that the cable is stuck at one position somewhere inside the dashboard or where the hot/cold air is exchanged. This method damages your genuine cable and doesn't fix the issue so please contact the professionals instead of doing it yourself.

@Mars-zgblbl

8 ай бұрын

My 09 Corolla’s selector knob was stuck on defog, far right. Traced the pulley cable to “slave” pulley inside dash. This operates a little door. The door has foam rubber seals around its edges. It’s difficult to access. Glue from the seals can flow in hot weather, gluing the door shut and making the selector seem stuck too. I used Armor All on the door edges and it hasn’t stuck since.

@user-fd5kv2zj9t

Ай бұрын

I always do it myself

Stop reading this david