How To Fix Stuck Ignition Steering Lock on VW / Volkswagen
Тәжірибелік нұсқаулар және стиль
#ignitionswitch #diy #cmcdiy
In this video I will show you how to replace and repair the Stuck Ignition Steering Lock on Volkswagen
When the key won't turn in the ignition or turns more heavily, it's time to change an ignition starter, because in the next period it will remain blocked and will not allow you to start the engine.
This problem is very bad as it can leave you stranded (you won't be able to start the car).
You will stay with the car on the road
Thanks for watching . And do not forget, Like and Subscribe
Disclaimer:
Due to factors beyond the control of CMC DIY, I cannot guarantee against improper use or unauthorized modifications of this information. CMC DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. CMC DIY recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of CMC DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not CMC DIY.
Пікірлер: 156
I noticed this is an issue for many Volkswagen owners. Good job showing to others how they can fix the blocking wheel on their Volkswagen cars. Keep it up.
@CMCdiy
Жыл бұрын
Thank you
Very well explained process. Vokswagen owners who have this problem will thank you. Good job. Keep it up!
@CMCdiy
Жыл бұрын
Thanks
thank you very much keep sharing the knowledge u saved me about $350 and it took me about 1hr give or take
Video penjelasan yang luar biasa. terima kasih banyak untuk berbagi pengetahuan Anda.
Terrific presentation, CMC DIY! Looks and sounds marvelous! Best wishes. God bless.
Thank you thank you thank you, just switched out the cylinder on a 2012 Passatt. Putting back together is much more fun than taking apart😅. I really appreciate the help.
@CMCdiy
Ай бұрын
Glad to help
Beautiful sharing 👌
Tutorial yang sangat menginspirasi kawan
Parabéns pelo conteúdo amigo 🤗😘
Great video! You explained it really well!
Always learning something new. Thanks for sharing
Very nice tutorial! Thanks for sharing! 👍👍
AWESOME video, thank you for posting this, and speeded up to stop the boredom factor, please post more, Bless 🙂😇
very nice to watched you repair the car , nice sharing
Currently struggling with this problem the clips that get taken off at 6:15 in the video do they get put back onto the new housing or do I need new ones ?
Great sharing. Happy Sunday 👍
Wonderful sharing. Thank you so much 👍
Cảm ơn bạn đã chia sẻ cho mọi người đều biết, bạn giỏi lắm ❤
But steering wheel bloque how turn it
Tutorial yang sangat bagus 😊👍
Very informative video, Great tutorial !
This is amazing😮have a wonderful day ahead😊love lots from Philippines🇵🇭🥰
Helpful video! I am still putting up shorts. Cheers!
Buongiorno. Bellissimo video ☕🥣🥞🥐🍳 Buon sabato sereno a tutti.
I fixed mine by disconnecting the battery - the key was released.
Thank you so much for your information.
Well explained Thank you for sharing this useful video. 👍😊❤️
Great tutorial...! 👍 Thanks for sharing
How about of I can't turn steering wheel at all? Ignition cylinder not allow me to turn with the ney
Had an issue with mine where I could not get the lock into the correct pin position. I ended up having to cut the unit in half and remove the innerds to get the lock to release.
@CMCdiy
Ай бұрын
I am very sorry to hear that. I imagine you've had a lot of work
Amazing sharing ❤
You are the coolest car repair specialist, very wonderful
Great project my friend! Big Like👍❤️
Wonderful sharing. Have a great day 👍
Bravo my friend good job, and very interested and technical too i enjoy from start to finish 👍
So what parts do I need to order for this? Just the ignition starter?
At 5:30 the best tool to spin those out is an automatic center punch. Press down going left and the punch will help spin it out each time it clicks.
Great tutorial ! Hard ignition. Great
Thank you so much for these awesome creative ideas and hacks good luck
What can be done if the key will not turn to the on position?
Excellent shot !
Thanks for sharing 👏 👍
Awesome demonstration! :)
Wonderful sharing
I tried to head off the key cylinder from the beginning because this is my issue. How to release the key cylinder without able to get in ignition mode, turning the small whole to get the wire straight in? Thank you very much
Nice video. Thanks for sharing!!
Great fix!
Great advice FRIEND 🙂🔥
great tip thanks for the share 👍
Awesome 😎 Very interesting and informative content my friend Thanks for the wonderful sharing 🙏
Berbagi vidio tentang mesin yg bagus dan keren kawan ❤️👍❤️❤️
Very nice video 👌👍 very well explained 👌 Great sharing 👍
What do you do if the steering wheel will not unlock. I can't access the screws or airbag clips.
Wow Thanks for sharing
Cảm ơn ban nhiều ❤
Hello, Very nice ! Thanks for sharing ! Happy week
Thanks for showing us how to fix it
Wow good sharing idea.
kolay gelsin çok güzel paylaşim
Very nice reparation this very avesome work
Wow.. You much are skillful repairing car steering wheel. Very nice work 👍2
The information is very useful.🧐💜
I can’t even get my key to the on position, any advice?
Good Saturday morning and have an awesome weekend 😊👋
Very educational
Great tips🎉❤
Awesome!👍👍
very interesting and technical presentation
Świetny film, dzięki za udostępnienie.😊😊😊
Just dropping by for another view! 👍👍
Bạn sửa vô lăng hay quá
Awesome explained video. thanks a lot for sharing your knowledge. LIKE16
Amazing ❤
Thank you!
It helpful mate
Is the problem with this lock the same as mine? I can get the key to turn to AC but I can not get it to turn farther to start the car?
passando pra deixar mais um like
Thank you very much Nice and clear Very helpful We appreciate
great project 😎, loved the video 💥👍💙🎵
Nice tutorial👍
Nice tutorial sir how to fix ignation
Great work video sharing 👌
@CMCdiy
Жыл бұрын
Thanks
wow..super
Hadir untuk ke 2 kalinya kawan,semoga sukses👍
AWESOME✅🏆💪🏽
Amazing! Friday November 10, 2023
Great project my friend! Big Like 9:30 👍
Hi, good job!
That is awesome. 😊🎉
@CMCdiy
Ай бұрын
It really is!
Very good video thanks for the information cheers from Ireland 🇮🇪 my man thanks take care have a beautiful life ..😀very much appreciated.. Brian
@CMCdiy
17 күн бұрын
Thanks 👍
Very nice content!
Excellent work! definitely enjoyed it my friend, full view and thumbs up,,👍
amazing video bro
very nice
Amazing work friend, very informative video. Thanks for sharing this and keep up the excellent work. New subscriber here.😎👍
Nice sharing
great content
Great video FRIEND 🙂
Very nice 👍
Super vidéo ❤❤❤❤❤❤