⬇️Scotty’s Top DIY Tools: 1. Bluetooth Scan Tool: amzn.to/2nfvmaD 2. Cheap Scan Tool: amzn.to/2D8Tvae 3. Professional Socket Set: amzn.to/2Bzmccg 4. Wrench Set: amzn.to/2kmBaOU 5. No Charging Required Car Jump Starter: amzn.to/2CthnUU 6. Battery Pack Car Jump Starter: amzn.to/2nrc6qR ⬇️Things used in this video: 1. Brake Cleaner: amzn.to/2BCC2n7 2. Needle Nose Plier: amzn.to/2ic4Olq 3. Screwdriver set: amzn.to/2j92UCG 4. Ratchet and socket set: amzn.to/2inoxOY 5. Mechanic’s Tool Set: amzn.to/2Bzmccg 6. Wrench Set: amzn.to/2kmBaOU 7. Shop Towels: amzn.to/2jGDfkA 8. Disposable Gloves: amzn.to/2zSRuxO 9. Flashlight: amzn.to/2kwtiu3 10. Common Sense 11. Full HD Camera: amzn.to/2AvoEk7 12. My computer for editing / uploading: amzn.to/2i2sKYz 13. Video editing software: amzn.to/2jv5Fhf 14. Thumbnail software: amzn.to/2k7tz6C 🛠Check out my Garage to see what I use every day and highly recommend: www.amazon.com/shop/scottykilmer 👉Follow me on Instagram for the latest news, funnies, and exclusive info / pics: goo.gl/ohy2cA

@jamescarlton8714

6 жыл бұрын

Scotty Kilmer how to stop my car from cutting off when i put it in drive

@johnbutler4088

6 жыл бұрын

Scotty Kilmer io

@therealandrewcano

6 жыл бұрын

Scotty Kilmer what would be the way to do this with a 4.9L i6 . For my 1995 f150

@user-rt4jt2mf8n

6 жыл бұрын

What sealant did you use?

@JorgeGarcia-qr3hz

6 жыл бұрын

Scotty Kilmer I have a 2000 Ford F-150 XLT. I checked the spark plugs on the passenger side but I noticed that the plugs are not in the valve cover, they are beside the valve cover. So my question is what’s causing oil to go into the spark plugs? The valve cover looks nice and clean! Could it be the intake manifold gasket that’s going bad?

Homie picked the easiest car to do this on 😅🙈

@jenswinder329

4 жыл бұрын

Fortunately it's a 2.0 Toyota the exact model I'm working on.

@DANNYN224

4 жыл бұрын

@@jenswinder329 not 2.0 2.2 in this case but same procedure

@PatrickBateman88

4 жыл бұрын

I gotta do this to my Volvo s60 and I don't have a valve cover I have a can cover

@deandrehogan9391

4 жыл бұрын

I just got rid of my '96 Camry 2.2L. The easiest car to work on ever, frfr 😂😂😂

@Latexghost

4 жыл бұрын

Let me see him do this on a 04 Quest.

different cars actually have different designs, some have the tube seal built into the valve cover gaskets, some can be changed from the top, some from the inside, and some actually require removal of the tube assembly itself.

@highcaliberexclusive9890

3 жыл бұрын

What about a 2000 Toyota Avalon. Please let me know.

@MuthaDucka1

5 ай бұрын

​@@highcaliberexclusive9890same as this video

Just changed plugs myself for the first time & saw oil, got that OH NO feeling! So thankful for Scotty! Watch your videos all the time & fixing up on my new '06 xB . You're the man! Thanks for making working on my car easier & even fun!

Scotty saves the day again! Had this happening to a jet ski I just bought and was thinking I made a really bad mistake in buying it! I thought I had a major engine problem. Nope just spark plug tubes gaskets! Thanks a bunch Scotty!!

Wow Scotty, you explain clearly, quickly, and enthusiastically this is a great tutorial video! Right to the heart of the matter, thanks!

Scotty, you are my absolute favorite car guy! Thank you for your service...both here and in airborne!

depends what's left to grab. Ford plugs break all the time like that, and they make a special kit for removing them that has all kinds of neat tools for grabbing what's left and getting it out. It works great, and all auto parts stores either sell em or can order em. I got mine at an Oreilly's auto store in texas.

funny thats my same engine. i was hoping scotty would have this video. But to have it explained on the same car and engine is great!

@MrSenpaikakashi

6 жыл бұрын

luis lopez yeah ive got a celica too this is litterally perfect.

@jopisano67

5 жыл бұрын

I have a 1995 2.2 4 cylinder Toyota Camry. And it looks like my engine as well. Same numbers, same layout and all.

@DANNYN224

4 жыл бұрын

Me too have to do mines

@ForteX9

4 жыл бұрын

Lucky

@danielc.3725

4 жыл бұрын

Yeah guys, me too!, I had a 1994 - CAMRY, for the Wifey, & 2000 - CAMRY, for the in-law, but he forgot the most important part, Noticed he mentioned the VALVE - COVER- & Valve Cover - TUBES. WELL I did this same exact job, One month later, I find out that I'm still having LEAKS on top of my spark plugs!!, So, I start asking around, other MECH. W/ much experi than me of coarse, & he told me that the spark plug tubes, are CUT in half in 2 - pieces, & are threaded together, & maybe some factory some manufacturers did not put any silicone on the threads and that's where the oil is leaking from.... Cuz it was driving me nuts and crazy like where is the oil coming from??? 🤔 Anywho, just thought I would share this with you guys or someone who needs some help....

Nine years later, thanks Scotty, I just discovered your channel in 2019!

I'm 53 yrs old and did this with help from my son. We followed your video which was a little different because I have a 2012 Ford Fusion SE 4 cylinder. It was easier than I expected. I was quoted $400+ just to chane the 4 sparkplugs and coils. They wanted to charge another $200 to change the gasket! Thank you so much for your videos!

Scotty you’re the best. Everyone else is too busy trying to seem smart, that they don’t actually give a god descriptive detail on how to actually fix the problem.

Man.... old school scotty is the best 💯

Scotty always says positive answers These mechanics out in Fresno California scare me out of my socks with the wacky answers the give out!

you get one question, this is free after all. It's rather hard changing those tubes out due to little working room. Try some AT 205 reseal, it can often stop seal leaks. Hard to find, I get it at amazon

I rarely use torque wrenches, only on crucial things like head bolts when putting a head gasket on

Videos like this are why you got a KZread golden button and why I love your videos, you get to the point quickly!!

yes, if the oil is only on the burning end, the engine is wearing out inside, just keep oil , change the plug as it fouls, and pray

I love these vintage Scotty Vids! After watching him all these years he never fails to be a Man of the People. Go Scotty Go!

Appreciate your videos Scotty. My 2016 Optima was guzzling oil. My mechanic stated that oil was getting through the O ring and wetting the spark plugs causing me to sputter and misfire. He recommended a complete engine rebuild. When I took it to the dealership, they replaced the spark plugs, PCV valve, rocker gasket cover, fuel pump gasket and fuel pipe, and completed an oil change and 2 part throttle body service. I'm back and running again this week but I fear all this work still isn't going to fix the excessive oil consumption issue. There also seems to be a lot of back and forth online about whether a bad gasket would allow the spark plugs to get soaked. Keep up the good work, pal. I'm here every time something up with my car.

Love your videos, you don't waste time chatting too much. Your explainations are quick precise and informative. Keep up the great work. subscribed

@sweetcheekslovee yes, it can short out the ignition system.

@scottcrowley2061

3 жыл бұрын

Thought oil was not a good conductor of electricity, why would it misfire from oil?

This video covers my exact issue in this exact engine in my 1993 Celica, will be doing this in the next week or so. Your videos have given me the knowledge and confidence to work on my own car.

@jstory25 depends where the oil is, if the whole plugs are wet, the spark plug tube gaskets just need changing as in this video. If only the firing ends are worn, yes, the engine has internal wear like valve seals being bad or worn piston rings. BIG money there. Scotty

Oh thankyou good sir! My girlfriends 97 camry is breaking down and theres oil in the plugs. I know now i can definitely fix it. Hell yeah

Very helpful video, thank you. Question, what do I do with the tube full of oil after changing the gasket. Do I just leave the oil in there and will dry eventually or do I drain it somehow? thank you

Thanks Scotty, one of your best videos. This is a subject rarely covered here.

Always the videos that help me save money and get the job done. Thanks Scotty!

@trevockeys if they're filled with oil, the engine is just wearing out, period. it would need rebuilding, more than that thing's worth really. When they fill with oil, they will not spark and start up. Scotty

@modernNeanderthal800

3 жыл бұрын

I think this is the answer to my 07 Chevy Aveo with a new valve cover seal (with spark plug seals) soaked spark plugs, and misfire

@TheChuyDewy

3 жыл бұрын

@@modernNeanderthal800 u can ask him directly on his questions app check his website

Thanks so much!! Just what I needed! You da MAN!!!

Seriously excellent help. Had no idea what I was doing and completed this on a 2000 Camry LE in less than an hour. Thank you!

He was a pro mechanic for decades, so it will take you longer... but the DIY process is easy. Follow directions and be thorough!

yeaaaa. i wish it was that easy on everything

Hahaha this dude is awesome :D I enjoyed just watching :D

@CanadianBullFrog

5 жыл бұрын

Matt Wyckoff best person on KZread

Where has this guy been all my life- You make car repairs extremely easy to understand-

Dude I love your videos i have a camry that i had to do this to. Your video is what i went by. You are so intense in explaining but your face is just as calm and cool. Keep up the good work and thanks for the lesson!

those 2.2 toyotas are extremy reliable. I seen a few with 400,000 miles and dont burn oil. I wish toyota still made those. Our 08 prius has 240,000 burns a lot of oil but runs like new

@FinalMix64

6 жыл бұрын

Your PCV valve is probably stuck open. A new one is like 8 bucks.

@CCRtoyadventure

4 жыл бұрын

Mine does too, with 350K miles. Replaced PCV valve with OEM from dealer but still burns.

yes, clean it out, I use compressed air myself

@dannyzamudio1252

3 жыл бұрын

What kind of seal do you use?

@98eclipse47

3 жыл бұрын

@@dannyzamudio1252 use some rtx gasket maker

Thank You, Scotty, Your video was The Best for helping me fix the problem on my '94 Toyota. There si a lot of bad, confusing, or just plain wrong info out there. Thank You for showing and telling what to do. Gary

First of all humongous thank you. You are very generous for sharing these videos. Before I saw this video, I almost went to a mechanic and have my engine block fixed. I found out that all the valve cover nuts were loose. Re tighten and moved on to the next possible issue. :)

It's actually the spark plug tubes leaking. They are threaded on the bottom to the head, with silicone on them. It requires a special tool to remove the tubes in order to put new silicone on the threads.( Don't forget to clean the old silicone off the threads.)

@nicholas8479

6 жыл бұрын

TheTech660 Don't you mean High Temperature RTV Sealant instead of silicone?

I remove all the plugs and crank the engine, then it throws it out. coils can only truly be tested dynamically with a freeze frame oscilliscope and years of reading wave forms. Best left to a pro. Small tests are not worth the time.

My favorite mechanic videos right here on this channel. Thank you Scotty!

Hey scotty! You rock my friend!! The best car guy on youtube for sure. 2 questions about this vid: - do I have to remove the spark plugs before doing this job? -how do I manage to clean the oil spill down there to not screw the plugs back in their oily positions after cleaning the them?

Not every engine is this easy lol

@Ybsjek

4 жыл бұрын

Just buy a Toyota 😂

@CIASPY

4 жыл бұрын

4 banger easy job to do

@Solobollo

Жыл бұрын

yup 350z was a nightmare

@Tastaliciousful

7 ай бұрын

any boxer engine

@michael-co5pi

3 ай бұрын

most are

scotty da man

@scottykilmer

6 жыл бұрын

+jason jennings thanks 👍

You're awesome Scotty. I can actually trust you. I'm going to try and replace my own spark plug tube seals on a 2001 honda civic LX 1.7... Let's see how it goes

I've seen a few of Scotty's vids and this was the best, mainly because I just noticed mine and had no idea. I've just started doing my own work again because the shops are so crooked, they wouldn't have found this anyway. The told me my tire had a screw in it and needed to be replaced with a set of four. I rotated my tires myself today and found no screw, just a low tire. I'll be doing these seals myself.

Its usually the valve cover gaskets its a common problem I discovered this when changing my spark plugs at my local mechanic they were due at the same time of the plugs so Im changing the cover gaskets and spark plug tubes so I don't have to worry ever again. It beats having to change the plugs just a few months later again LOL!

@JMunn55

9 жыл бұрын

My stepbrother's 4-cylinder Mitsubishi has two oil covered spark plugs and a little leak in the Valve Cover Gasket as well. Doing it today. I would not use a screwdriver to pop the cover off though, could score or bend where the seal is made

Great video, but it only covers one potential cause of spark plug tube leakage. The absolute best way to remedy oil in the tubes is while you have your valve cover off to change the gasket and upper spark plug tube seals is to remove the spark plug tubes themselves. They just screw into the cylinder head. Clean off both the lower and upper threads with a wire brush, apply your favorite sealant to the lower threads (I like Toyota FIPG--get it at Amazon), then screw each tube securely back into the cylinder heads. I use a small pipe wrench with the teeth ground down a bit to remove the tubes and avoid marring. I've repaired many this way, it works very well. The potential for oil to seep past the threads in the head that is constantly bathed in oil is much greater than the splash getting past the seals at the top of the tubes. So, if you're experiencing oil leakage in the spark plug tubes and you ONLY replace the upper tube seals, don't be surprised if your problem persists. Thanks.

@TaniaDianna322

6 жыл бұрын

blown8950 hi i have a 2010 toyota camry le V4 2.5l i just replaced all of my spark plugs and noticed that one of them had oil JUST ON THE THREADS nothing past it. Would you recommend i do what you're talking about in your comment, or just change the Valve cover gasket?

@user-ne2bb5nh7t

5 жыл бұрын

Thanks for this comment! I went to change my spark plugs today and found oil in only one well. So it makes sense that the one tube is leaking while the others are still clean.

@Elementlmage yep, total engine rebuild would be needed in most cases, but if it runs, live with it. And if you want to keep it, get one of those used japanese engines to replace it with, as I show in my vid" How to replace an engine in your car"

you can use 3m Weatherstripping sealer

If the whole plug was covered in oil at the top from previous leaking, yes.

When I went to change my spark plugs there were 3 spark plugs missing lol

@Kuessemir

3 жыл бұрын

Omg 🤣🤦how was it running?? Or wasn't it? Lol

@flight7good687

3 жыл бұрын

@@Kuessemir it was running 🏃‍♀️but loudly 🤐

@user-eo7ol9dl3m

3 ай бұрын

Mine works on 3 or 2

you can use that, I use permatex The Right Stuff myself, costs more, but is a killer sealer

@tigergreg8 no, often they will not change the seals, cheap kits only come with the valve gasket itself.

scotty on the mirrors looks like mrs Clinton

@gregorysokol4997

6 жыл бұрын

_

@ragnaroksangel

6 жыл бұрын

LOL

@jackadams4825

6 жыл бұрын

Lmao. Hes funny as hell

@hectorchavez548

5 жыл бұрын

😂😂😂

@irishmuscle7352

5 жыл бұрын

Lmao

not necessarily that is the fix, the tubes are so high that you would be filling up oil at the top, so its less likely. its more of the actual metal tubing that leaks that is threaded into the head.

@king49334

5 жыл бұрын

It's the thread connection that leak I doubt the oil can travel upward past the seal and top threads and washer

@jstory25 rarely does any sealer fix oil plug seals, just remove the valve cover and put new seals on. Scotty

dude i FREAKED when i pulled out those plug wires. thank you SO much. i know absolutely nothing about cars. i've hooked up radios and stuff but nothing else but this video helped man..THANK YOU!

hahahahahahah.. OK, let's see the five minute removal of these tubes in a Nissan 350Z! With that car, you remove the whole induction system.. (Intake, throttle body, intake plumbing and all associated wiring) then you can remove the coil pack from each cylinder, then remove the plugs and finally the valve covers. Several hours later, you may have it all back together and hopefully, if you did it all right, the engine will start and actually idle. Loads of fun. Now, with my 4 cyl Civic, it took all of an hour to do and I was taking my time with it all.

@Mirciulikkk

5 жыл бұрын

same for a N53 BMW engine ffs

@slonergan0921

5 жыл бұрын

About do this to my Z this weekend. 🙄

@iamthefoetus

5 жыл бұрын

V6 life

@DaytonaBlueHr

4 жыл бұрын

EJSFilms2K Its worse on a 3000gt trust me 🙃

my spark plugs are covered with oil on the other side of the plug...the threaded side with the spark. strong smell of gas as well. Any videos for that?

@alexm2623

7 жыл бұрын

2 separate issues sounds like. He has videos "fix a car running rich" and "car smells of gasoline."

@sumtingwong3626

7 жыл бұрын

Oreillys sells the spark plug tubes. MSPT5 is the melling part number. I bought a set just in case I goober up the old ones since they have like 200k miles on them they are pretty tight in there. the threads go into the cylinder head thus oil on plug end. they misfire action

@Philly1224

6 жыл бұрын

If oil is on the inside covering the threads with the spark, you have a bad problem. Your car will most likely have blue smoke at startup or acceleration. This indicates bad head gasket or a bad piston ring seal. Both cost thousands to repair :( . Scotty has another video describing this and he uses ATP reseal in the video, but that is basically a band-aid on a gunshot wound (it helps, but it isn't permanent). This wouldn't cause a smell of gas though, so you may have a separate issue as well. It's been around a year since you posted this, so it would be interesting to see what happened.

@TaniaDianna322

6 жыл бұрын

Philly1224 i have just 1 of my spark plugs covered with oil the THREADS ONLY though. So far no smell or any oil above that.... Im planning on replacing the valve cover gasket but after reading your comment im not to sure that will solve the problem... What would you recommend?

@akereboma9175

5 жыл бұрын

Tania Guzman did you fix? What was the problem?

Super helpful video! Went to change my sparks. 2 sparks had bad oil. Unfortunately my engine is below my air system. I have to move it/take off to access my engine. Tomorrows gonna be fun. Lots of truck work to do. Getting to the engine and breaking loose years worth of grime to loosen fasteners to get access to my cylinder seals.

Thank you for posting this! I have this exact same engine and problem with it this video helped out a ton.

And don't forget to put some extra sealant on that big gouge where you just drove that big screwdriver istraight into the mating services 😲

@mokuohaisaia8447

5 жыл бұрын

Mark O yes cause the flat head was worked real hard to get that stubborn valve cover unstuck, got a vid to show us how its done 😏

Fucking Nissan makes you change the whole valve cover to fix this damn issue lol. The spark plug tubes don't have seals themselves, it's all a part of the valve cover. This is why I like working on my e39 way more.

Also I didn't have enough room in the last post, but I wanted to say, Thanks for the great videos. Keep up the good work !!

yes, try try the seals and a valve cover gasket kit first

generally I just fix my own motorcycles

I have this problem.but its a G35, not so simple.

@DIYApprentice

7 жыл бұрын

The valve cover gaskets were leaking on a 2002 Altima 3.5SE with the VQ engine that my mom owned. I had to replace both plastic valve covers and the gaskets. The tube seals cannot be easily replaced.

@integrafreak1

7 жыл бұрын

Exactly.This car he worked on made it look like a breeze lol

@DIYApprentice

7 жыл бұрын

Integrafreak1 The VQ engine is a bit of a pain because of how it's transversely mounted. It's about a six-hour job, most of which is spent removing parts, including the intake manifold and window cowl, to get to the rear cylinder bank - smh. My Acura V6s are a bit easier, but there are a bunch of brackets to remove to get to the driver's side seals. Also, Honda added a second set of lower seals in many of their cars that require the valve train to be removed to replace them. I'm replacing those now in my Acura Legend because of a misfire issue that appears to be related to oil in the spark plug wells; the once-rubber lower seals were brittle and hard like plastic.

@cjmarsh504

7 жыл бұрын

hoopfan71 I own a 1996 Nissan Maxima, with the VQ30DE engine and I recently replaced the front valve cover gasket was a breeze, but the rear, however, will be a pain to get off. because of the intake manifold.

@jerryross4060

6 жыл бұрын

Race car

do this video to fix the oil leaking into the spark plug holes. And replace the distributor ONLY after if that alone doesn't fix it. Of course change the spark plug wires too as oil ruins them

My civic has 238k miles and is still running strong. I just discovered why I was leaking a hell of a lot of oil and it's a bad valve cover gasket. I also have oil on my plugs and never thought of that. Thanks for the informative video Scotty!

@LuvMetric

5 жыл бұрын

Ryan Lilly what year is your civic

that will ruin the cat, empty the gas tank and replace the fuel filter quick. AND stay away from crazed women.If you like my car help, be sure to watch my live car talk show every saturday morning at 10 AM CST on google events. I answer your car questions LIVE there. Just go to my scotty kilmer channel on youtube saturday morning at 10, and click on the google plus icon on the top right corner. That takes you to the event. You do have to be a member of google plus to ask questions, so join up

@slickdawg4634

5 жыл бұрын

Scotty Kilmer a buddy of mine is a Toyota tech and told me they can also leak from the bottom of that dork tube is that true??? If so why didn’t you mention that in the video? Thanks Scotty K

@slickdawg4634

5 жыл бұрын

**spark

mine is a subaru......

@audioamateur

6 жыл бұрын

LOL

@jameshendricks1220

6 жыл бұрын

got the same problem with mine too. I think I'm done with Subaru now what with the head gaskets and all

@TheeZakjeNL21

6 жыл бұрын

Its a pain in the ass.....

yes, often a weak fuel injector on that cylinder alone, or a spark plug that isn't firing corretly.

@unboxingguru1 no, that's the valve cover gasket. Head gasket is lower down, VERY expensive to replace.

I just mix dirt in my oil, never had a leaky engine in my life

@clove1604

4 жыл бұрын

Hmmmm.....tell me more!!! Does it really work???

yes, I use it all the time.

I just saw this problem on my rav4 today and found this perfect video. Tks so so so much.

Scotty is great !!! Your videos have helped me with so many problems I have had . Thanks keep making videos.

@6motox generally bad piston rings allowing oil to burn quickly on the plugs.

@imFAMOUSxD certainly replace the gasket set, but normally those old things need new distributors when they do that. If you have no spark when it doesn't start, replace the dist. Scotty

@YungStar490 that means the engine is wearing out inside, either valve seals or piston rings.

@moxxccc1 it's flooding out, often leaking fuel injectors or leaking fuel pressure regulator, check that first.

And that's another reason why we love Scotty Kilmer.

you are always on point , i always recommend your videos to everyone i know

Man, I really enjoy your vids... RESPECT

I haven't worked on one of those in ages so I don't remember what number of each part there is. Kits are supposed to come with all grommets seals and a gasket. If yours doesn't, get one that does.

Scottie, I wish I could meet you. Your a genius , you have helped me fix my Camry for years and I want to say thanks and Merry Christmas- go team USA

Thanks man, i was starting to panic. I feel more relieved now. Again thanks a million.

@alltheseflavors

5 жыл бұрын

Same for me just now when I went to change plugs for the first time myself & saw oil! Scotty to the rescue!

This video was so helpful. I didnt know what was wrong with my prelude it just misfires once in a blue and the check engine light comes on. Thanks Scotty Kilmer!

How can you not love this guy. Amazing guy. Thank you Papa Scotty. LOVE

@ShortyzProductionz Yes, carburetor is messed up, try a complete tear down and clean, soaking overnight in cleaner

Perfect and thanks! You are a natural and natural speaker!

Hey Scotty my 05 Tacoma has this issue. Freaked me out when I saw the oil but your video has empowered me to fix it myself. Thanks. It's the 1gre v6.

@scottykilmer

9 жыл бұрын

If you like my car help, be sure to watch my live car talk show every Saturday morning at 10 AM CST on KZread. I answer your car questions LIVE there. Just check it out at How To Ask A Live Mechanic Car Questions Free On KZread . And remember, every TUESDAY I upload a new video on the scotty kilmer channel on KZread, kzread.info , so don’t miss them.

I only found one like this and I totally feel better knowing this can be fixed without a hefty bill :) thanks.

@One4seen just try to be neat, but most sealer will just stay where it is anyway when bolted down.

I had a busted coil and oil in my spark plugs this morning. Car misfires hard. I vacuumed a cup of oil from all plugs on passenger side of engine. I look forward to getting fixed soon. Also, car is 02 LS430 with 175K miles. Thanks for video!

ticking is often fuel injectors ticking or valves ticking. Try to figure out which one, injectors that tick but run good can be lived with. Worn valves can't be for long.

start with the seals and pray the end oil just dripped there. If oil is on only the end when done, engine is burning oil inside, a BIG job