How to fix Logitech X50 Bluetooth speaker CRACKING SOUND

buy me a drink? - paypal.me/jadednirac?locale.x...
This is a video tutorial on how to fix Logitech X50 Bluetooth speaker CRACKING SOUND
RESPECT and SHARE Thank you!
SUBSCRIBE and like for more videos!
Ocean by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2OCvpHU
Music promoted by Audio Library • Ocean - KV (No Copyrig...
IG: / jad6d
Twitter : / jad6d
FB: / jadednirac

Пікірлер: 103

  • @SMITESHSURESH
    @SMITESHSURESH2 жыл бұрын

    I was just trying to find how to open the speaker to try and fix it, but this! This is exactly what I needed 🤯Thank you so much!!!

  • @baminorchez683
    @baminorchez6838 ай бұрын

    Thank you so much.....haven't been using due to cracking sound for almost a year and almost threw it out.... Now its fine as new....

  • @XxvakerxX
    @XxvakerxX2 ай бұрын

    En la mía no se notaba algún daño pero seguí con los pasos con cinta de aislar eléctrica y quedó excelente Muchas gracias!

  • @komphatak3395
    @komphatak33952 ай бұрын

    Exactly the same problem. Thanks mate.

  • @adityaprakash1148
    @adityaprakash1148 Жыл бұрын

    A very thank you fOR MAKING THIS VIDEO , You Extend the life of my X5O life.

  • @hitanshuroy8443
    @hitanshuroy84432 жыл бұрын

    Hi I just repaired my Logitech X50 & it works absolutely fantastic, thank you so much. Love 😍

  • @kirankinnu7463

    @kirankinnu7463

    Жыл бұрын

    From where?

  • @mayuraggarwal1925
    @mayuraggarwal19252 жыл бұрын

    My Logitech X50 has same problem and resolved like you and sound is very perfect. Thank you so much... :)

  • @ashishsharma582
    @ashishsharma5823 жыл бұрын

    thanku bhai meri problem solve ho gyi sirf apki wajh se 😘

  • @jimvenmortel6934
    @jimvenmortel6934 Жыл бұрын

    Thank you so much Finally I fix my speaker same as you .

  • @nikhilganesh1438
    @nikhilganesh14382 жыл бұрын

    Thank You So Much bro, it works with my JBL Go speaker, keep it up!

  • @Premnicholussamson
    @Premnicholussamson Жыл бұрын

    To fix that diaphragm i just used a Electrical insulation tape..and it worked fine. Did the job 👍🏻

  • @Jad6d

    @Jad6d

    Жыл бұрын

    that works too

  • @danielgallo7343

    @danielgallo7343

    Жыл бұрын

    Al menos deja de sonar horrible..gracias por la solución

  • @aljonacacio8279
    @aljonacacio82793 жыл бұрын

    My jbl go has the same problem, it also has some cracks that causes static sound. What I do is I put a very small amount of super glue using needle on each cracks. I let it dry for about a couple of minutes. Fortunately, it works. My speaker now works perfectly well again. This technique might works on small to medium size spaker with mild to moderate damage.

  • @tejassharma6053

    @tejassharma6053

    2 жыл бұрын

    Which glue did you used??

  • @faresbahareth2723
    @faresbahareth27233 жыл бұрын

    Thanks, it's really fix my problem with my JBL Pulse speakers

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    good to know, please like and sub, thanks

  • @rittoroy6582
    @rittoroy65823 жыл бұрын

    Thank you so much... solved my issue

  • @someguy5719
    @someguy57192 жыл бұрын

    I repaired mine using surgical tape, i think it's much better than using plastic tape. Your video was very helpfull for the repair, thank you🤝👋

  • @jimvenmortel6934

    @jimvenmortel6934

    Жыл бұрын

    I used it too ,much better than plastic tape .

  • @a.a.837

    @a.a.837

    Жыл бұрын

    Me too lol

  • @turkurma1379
    @turkurma13792 жыл бұрын

    Thankyouuu broo!! it works✨ Im glad that my speaker is usefull again and save my money💓

  • @emmanoeljunior5581
    @emmanoeljunior55813 жыл бұрын

    Thanks, it helped a lot!

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    im glad, please subscribe

  • @adityathakur5001
    @adityathakur50013 жыл бұрын

    Thanks bro. God bless you

  • @vilgregorioorada3022
    @vilgregorioorada30223 жыл бұрын

    i never expect na masasayang ang oras ko manood nito that transparent tape na nilagay bibitaw din yan... 'Rugby' lang katapat nyan

  • @AniketHanumante
    @AniketHanumante3 жыл бұрын

    Thanks!!

  • @juandanielcarpio6960
    @juandanielcarpio69603 жыл бұрын

    Gracias bro! Problema solucionado

  • @lilianbojorquez3274
    @lilianbojorquez327410 ай бұрын

    THANKS!

  • @macranjoh
    @macranjoh9 ай бұрын

    How did you remove the top cover? mine feels stuck :/

  • @ramarathod859
    @ramarathod8594 жыл бұрын

    Thx dear we need this video

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    welcome, sub it will greatly help :)

  • @ramaraman9256
    @ramaraman9256 Жыл бұрын

    Thanku bro. 👌

  • @midnightvegeta
    @midnightvegeta3 жыл бұрын

    sakto! thank you!

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    welcome, sub it will greatly help :)

  • @adah17
    @adah173 жыл бұрын

    Thank you for this video I was able to fix my Logitech X50.

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    welcome, a like and subs would be appreciated, and an update by now i used " stickglue " not scotch tape

  • @shafanisa3608

    @shafanisa3608

    2 жыл бұрын

    @@Jad6d what if i use silicone rubber sealant? is it okay?

  • @kingyt6121

    @kingyt6121

    2 жыл бұрын

    @@shafanisa3608 yes

  • @arnavsadhu
    @arnavsadhu Жыл бұрын

    Could u tell what the speaker part number says about it?

  • @douglasperez3977
    @douglasperez39773 жыл бұрын

    Great..! Job ....!

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    thanks please like and sub

  • @marlonbraydonvelasquez9706
    @marlonbraydonvelasquez97062 жыл бұрын

    He vuelto a usar mi bocina gracias a este video 😃

  • @bryanrafsanzani225
    @bryanrafsanzani2253 жыл бұрын

    may i know the driver name and size? i was searching for that & cant found it

  • @vimal9319
    @vimal93193 жыл бұрын

    best is to use a rubber-based adhesive

  • @MasakyoRenSai

    @MasakyoRenSai

    Жыл бұрын

    Any recommendations for products easily found in the Indian market?

  • @frankofranko282
    @frankofranko2823 жыл бұрын

    What size of the speaker..

  • @yizhanlove1877
    @yizhanlove1877 Жыл бұрын

    I have a different problem. i dropped my bluetooth about a month ago and now it does not make any sound. I open it but the speaker is not craked. can you please help me. its atendo sound with a lamp.

  • @yasukayami1820
    @yasukayami18202 жыл бұрын

    Where i can buy tools

  • @mohammadwallymohamad5225
    @mohammadwallymohamad52252 жыл бұрын

    What is the size of the speaker

  • @snehasingh5655
    @snehasingh5655 Жыл бұрын

    Help me cupkarbar kaise remov Kiya hai

  • @nosdenosde
    @nosdenosde2 жыл бұрын

    I used flexible adhesive made by scotch and it worked. but the sound is not the same quality.

  • @prateekdey8952
    @prateekdey89522 жыл бұрын

    Gasket makers silicon work great for these

  • @premkhatoi4348
    @premkhatoi43483 жыл бұрын

    How New spekar replace

  • @arieltemp
    @arieltemp2 жыл бұрын

    How many inch on this speaker??

  • @lauraromero6965
    @lauraromero69658 ай бұрын

    Cómo pudieron quitar la top cover!!!

  • @melbinvarghese2888
    @melbinvarghese28883 жыл бұрын

    Can you give the technical specifications of the diaphragm, so that I can buy it separately from a spares shop?

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    sorry but logitech did not provide any, maybe you can bring it to the shop with you

  • @amargupta705

    @amargupta705

    3 жыл бұрын

    Brother go and visit 'ALL ABOUT JUGAAD' channel he has a permanent solution for Logitech X50 cracking sound. Cause i was having a same problem like you👍

  • @gitagupta3825

    @gitagupta3825

    3 жыл бұрын

    @@amargupta705 yes bro i had seen his video he gives a really good solution for Logitech X50.

  • @Yhill_nn
    @Yhill_nn3 жыл бұрын

    would this apply to cracked bass sound? i've got mine dropped a few times (this speaker is really sturdy btw). the mids and highs are still working ok, but the bass got affected. even when youre just listening to a vocal recording of people speaking, but a bit bassy, it's cracking. i think a part of it broke inside coz when i shake it, i hear something from it, like a piece broke. i hope it's not major and can still be fixed

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    yes the tear will cost the bass sound to crack

  • @Yhill_nn

    @Yhill_nn

    3 жыл бұрын

    @@Jad6d cool. Im gonna try to fix it. Hope i wont do more harm lol

  • @justmayalittle
    @justmayalittle3 жыл бұрын

    my speaker fell of and now it has that cracking bass... can that be fix by that?

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    you have to open it, if the diaphragm is the one broken then it can be fixed

  • @TrackerScout
    @TrackerScout3 жыл бұрын

    Fix may be power strip: Logitec speakers seem to do it, usually to surround sound speakers. But for me after trying everything and even though did it when was unplugged from pc. The problem I discovered a week later was that my power strip was too close to the subwoofer box (all speakers plug into the subwoofer). It took awhile to discover because for years I had the same setup for my pc, power strip and subwoofer on the floor and never had a problem, only recently started doing it. But am glad I finally figured it out.

  • @prasanna250
    @prasanna2503 жыл бұрын

    Sorry don't try feviquick. And tape also. There is so vibration in sound so there's 2 things not working u have to change speaker

  • @julianperez513
    @julianperez5135 ай бұрын

    Se mojo mi logitech x50 maldita sea sera que hay solución😢???

  • @sreyasdaniel7860
    @sreyasdaniel78603 жыл бұрын

    You are a legend

  • @sparrow66188
    @sparrow661882 жыл бұрын

    Same problem with mu sounddrum speaker

  • @TheGuscolombia
    @TheGuscolombia Жыл бұрын

    Una mejor forma es usar pegamento de zapatos, yo lo use y feliz porque la cinta con el tiempo falla la goma, use pega de zapatos porque adquiere la forma de la suspensión de caucho rota y la reemplaza obteniendo el sonido lo más original posible, saludos

  • @kayemendoza3726
    @kayemendoza37262 жыл бұрын

    Hi. I can’t seem to open the top cap even after using hot air. How do I do this?

  • @Jad6d

    @Jad6d

    2 жыл бұрын

    just force it, maybe the adhesive is stronger on your unit

  • @deeprana6069
    @deeprana60694 жыл бұрын

    From where we can buy this rubber ring

  • @Jad6d

    @Jad6d

    4 жыл бұрын

    you cant buy that, thats why we need to DIY fix it

  • @tevesjohndavid5416
    @tevesjohndavid54164 жыл бұрын

    How did you open the topcap it seems impossible

  • @Jad6d

    @Jad6d

    4 жыл бұрын

    just pry it, it is just held on by an adhesive, you can also heat it with a heater to soften the adhesive

  • @tevesjohndavid5416

    @tevesjohndavid5416

    4 жыл бұрын

    Thaaanks

  • @chira4real

    @chira4real

    Жыл бұрын

    did i removed it

  • @Noir-mh3es
    @Noir-mh3es4 ай бұрын

    i use a masking tape with T-7000 adhesive

  • @dream0darkness013
    @dream0darkness0133 жыл бұрын

    Mine has no sound whatsoever

  • @shivamsingh40
    @shivamsingh40 Жыл бұрын

    Still can't open the top lid

  • @Jad6d

    @Jad6d

    Жыл бұрын

    you can use a blower to heat the top portion to soften the adhesive

  • @carlitosmontejo5441
    @carlitosmontejo54412 жыл бұрын

    If it worked for me thank you very much I love you

  • @karansingh-tu4eg
    @karansingh-tu4eg3 жыл бұрын

    Has it repaired upto 90% bro

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    yes about 90% sound quality

  • @marknielalcabasa8717
    @marknielalcabasa87172 жыл бұрын

    I used glue for the speaker and it sounds like new must try

  • @swetharavi4906

    @swetharavi4906

    2 жыл бұрын

    But it gets teared again....

  • @marknielalcabasa8717

    @marknielalcabasa8717

    2 жыл бұрын

    @@swetharavi4906 put 3 to 4 coat glue on the all speaker

  • @marknielalcabasa8717

    @marknielalcabasa8717

    2 жыл бұрын

    @@swetharavi4906 if you use glue sticks it will not bounce and no bass trible only

  • @swetharavi4906

    @swetharavi4906

    2 жыл бұрын

    @@marknielalcabasa8717 thank you... 😊

  • @shafanisa3608

    @shafanisa3608

    2 жыл бұрын

    what if i use silicone rubber sealent? is it okay?

  • @jasperkennethsi
    @jasperkennethsi3 жыл бұрын

    Thank you hahahaha

  • @Jad6d

    @Jad6d

    3 жыл бұрын

    welcome, sub it will greatly help :)

  • @vivekdasakashdas5737
    @vivekdasakashdas57372 жыл бұрын

    A Kash DJ

  • @brentgiant.v.2691
    @brentgiant.v.26913 жыл бұрын

    Sa akin linag yan kulang ng stick glue

  • @ayushjoseph2886
    @ayushjoseph28862 жыл бұрын

    You can deny or ignore the truth but you can't change the truth. Jesus is the only and only way to heaven. Repent for your sins.Jesus Christ is Lords of lord.There is no other way to get heaven without Jesus.He died for mankind sins and ressurected from death ,And his second coming is soon. Today is the time , whosoever believe and obey JESUS Will get Salvation and will be saved from eternal death. REPENT FOR YOUR SINS.You don't know when you will die. JESUS SECOND COMING IS SOON

  • @farhadrahman1658
    @farhadrahman1658 Жыл бұрын

    Useless tips.

  • @ryanreylozano131
    @ryanreylozano1313 жыл бұрын

    Exactly the same problem. Thanks mate.

  • @ayushjoseph2886
    @ayushjoseph28862 жыл бұрын

    You can deny or ignore the truth but you can't change the truth. Jesus is the only and only way to heaven. Repent for your sins.Jesus Christ is Lords of lord.There is no other way to get heaven without Jesus.He died for mankind sins and ressurected from death ,And his second coming is soon. Today is the time , whosoever believe and obey JESUS Will get Salvation and will be saved from eternal death. REPENT FOR YOUR SINS.You don't know when you will die. JESUS SECOND COMING IS SOON