Had a newly heat pressed jacket that had a letter not completely adhered. A corner was peeling. I used an iron and ironing board and a piece of parchment paper. Worked like a charm! Thanks for posting!

@smcneil40

3 жыл бұрын

I was looking for this confirmation with parchment paper

@sunshinechester4820

3 жыл бұрын

Thank you I was wondering if parchment worked!!

Fix starts at 3:08

@jamiepatterson558

2 жыл бұрын

Thanks so much! 😃

@thebrad271

Жыл бұрын

Too much blah blah, kzread.info/dash/bejne/hqaipK6Em9SXlbw.html Thank me later.

@cunabulaspes

Жыл бұрын

The real mvp!

@mszstm7427

10 ай бұрын

Thank you!

@crapxjenn

9 ай бұрын

🙌🏽

I did this using my flat iron for my hair with parchment paper and it worked like a charm... thank you so much!

This worked amazingly well !! I used a piece of fabric instead of parchment paper and it still worked amazingly !! Thanks allot !!

Thank you so much! I used a baking sheet and it worked just as well!! 3 of the letters on one of my shirts were peeling and this worked like a dream :))

@kurisuchantv1883

Жыл бұрын

Is it okay to use wax paper?

Very helpful, i got a shirt as a senior gift and some of the vinyl wasn't stuck on all the way so i will try this trick :)

So helpful, thank you!

Thank you! You might have just saved my wife's friend's dog's birthday present! 🎉🥳

Thank u so much, really helpful

Nice video! I'm currently doing jerseys, May I ask, why am I getting bubbles at my 2nd layer in vinyl when I'm doing finishing in glossy finish teflon? My temp is 165 C ( 330 F) at 10 Seconds

Worked like a charm Thanks

What would we do if the vinyl is cracking a little bit? Not big but just tiny little cracks probably from heat exposure.

Parchment paper works as well which is non-stick paper it might be in your kitchen.

I find laying an old plain T shirt over the top also works

What kind of pad do you use under the tshirts when you use the iron?

this worked, thank you! the edges of my logo were starting to peel, and i just used excess transferpaper from the sizor htv, and used it in place of the multipurpose paper

Thanks! Fixed my NIKE SWOOSH!

@amalaugustine2183

3 жыл бұрын

Hey how u did it

@feliciau3368

3 жыл бұрын

@@amalaugustine2183 I used a towel or wash cloth on top of the bike swoosh and pressed over it with a hot iron

@amalaugustine2183

3 жыл бұрын

@@feliciau3368 thanks.

Thank you💥🔨❤️ I just used parchment paper since that’s all I had seemed to work great I appreciate this little video❤️

I don't believe it......i have 2 North Face hoodies and the logos were peeling off.....I tried this trick but with a an A4 piece of paper instead as I didn't have the paper in this video,but I gave it a go and the logos are back in place! Cheers!!!!!!!!!!!!!!!!

@sajidhussain3519

4 жыл бұрын

Hi mate do u mean put A4 paper on top and then iron it?

I tried to use parchment paper but it kept sticking to the paper and not the shirt im going to have to try and find that paper

Can u I use a Teflon sheet will this work the same

Does this work if the letter is wrinkled???

I bought vinyl iron ons and they werent sticking correctly and ruined the pillowcase. Can I take the letters completely off and adhere to another totally different pillowcase?

Would parchment paper work similarly to that multipurpose paper?

Can you use regular say paper from your printer or do you need multipurpose vinyl paper? I was made a tshirt for a team. Vut as I wore the shirt I noticed edges/large section peeling. I never have done anything with vinyl. I need to re wear this shirt for next event

you are a hero, thank you for this video

Can I use parchment paper?

Omgggg THANK YOU

Hey can we use fevicol and then iron it????

Did you wash this project before hand? I have a jersey I bought about a week ago and washed it after a workout with the rest of my clothes the stripes at the shoulders (adidas) are hanging off, would this still work or would I have to add some type of special adhesive?

Can I use parchment paper

How do get the print outs on your blog?

I have some pvc type material leggings (The Current mood Nancy Zip it corset leggings to be exact) I haven't worn them yet, they were in my wardrobe for about a month and I went to wear them today when I noticed a load of the pvc material all peeling off! Is there any way I can fix this? (They're sold out everywhere otherwise I'd rebuy them) Please pleeeeaase help! I will even pay If anyone can give me a solution to this or if anyone has some more they're selling in my size (a long shot I know) I'm sooo desperate to be able to wear them. Please help! Thank you

Do you think you could use a normal peace of paper for the heat transfer??

I bought a shirt from my favorite KZreadr O.D.D TV and after washing it shrunk which was good because it was to big but now all the letters are fully falling off and it looks like garbage now, but luckily they sent me a new one and now I’m scared to wash it, I’ll just hand wash it and let it air dry

I have a Roblox Backpack with a vinyl and a little bit of it peeled off

Can I use a pillow case?

Just wondering where the links are that you refer to?

This was very useful for me. I was one to not put much muscle into pressing. Now I have to figure out why my vinyl looks like it's bubbling (melting?) after pressing. 🤔

@franchastermcwilliams3611

6 жыл бұрын

pkjm2616 adjust the heat temperature

Where’s the link for the paper???????

What if I dont have the paper sheet

Gonna try this tomorrow. I just bought my printed t-shirts and i didn't know that ironing them will peel them off (worst, melts) lol😭

I am new and am trying to do a glitter iron on. The first one was great but I can’t get them to stick at all?? Help!

i bought a velvet heat press design that was heat pressed on my hoodie i washed and made a mistake and put in the dryer and the cartoon velvet that was heat-pressed on is coming off,no adhesive to stick what can i use?

Tha Thank you!!!!!!

does anyone know if you can do this to a windbreaker or how i would do it with a windbreaker jacket?

I used this method and mine still is coming up. :(

Thanks it works for me I used bondpaper😂

What would you recommend if we don't have the paper you're talking about? Are there other alternatives?

@sunrisesunset7

11 ай бұрын

@CharityLaNae 1 year ago I did this using my flat iron for my hair with parchment paper and it worked like a charm... thank you so much!

@sunrisesunset7

11 ай бұрын

@lukepowell1988 5 years ago I find laying an old plain T shirt over the top also works

Thank you, it worked on my Man City shirt

@TyOnYoutube

4 жыл бұрын

Doing it with my Chelsea one right now lol

@mirm2114

4 жыл бұрын

I actually just watched this to fix the letters on my boyfriend’s Manchester United shirt! 😹

Please help!! I have made about 9 simple tshirts with script font phrases which after one wash some words have come off / lifted. I have pressed it for the correct length of time with my red cricut easypress as per instructions of htv, left it 4 days before washing inside out on a normal 30 degree wash. How do I make sure the thinner font stays on forever?

@AGirlandaGlueGun

4 жыл бұрын

I know some easy presses don't run hot enough. And it depends on what brand vinyl of vinyl you used

Video starts at 3:10

Does this work for hats too??

Good tip about looking at your products heat time, don't just Google your brand and go off what it says because Google is wrong most of the time on both time and temp.

Is there anything to do if the htv comes off the carrier/transfer paper? Like it falls off the carrier paper when I flip it onto the shirt.

@AGirlandaGlueGun

4 жыл бұрын

That is weird- you can just lay it out and then lay the carrier sheet over it to protect it.

Where can i print that paper for the times? i looked in your blog

@GhantFamily

3 жыл бұрын

In my experience it does work. 😊

Thx

You used a temp on the iron between 3 and 4. Is that a low, heat or medium heat, or somewhere in between?

@AGirlandaGlueGun

5 жыл бұрын

Right in between. medium! Always test on scrap vinyl and scrap fabric to get your heat settings correct!

I have a pair of leggings that I’ve worn twice and a few letters are coming up and I didn’t want to trash them so I’m going to try this instead

Would parchment paper work? Like you would use for baking?

@emmiekia7804

6 жыл бұрын

I only use parchment paper. I've done over 1,000 items including polyester/cotton, cotton shirts, drifit, canvas bags, etc.

@emmiekia7804

5 жыл бұрын

Jude Samson any side works. 👌🏼

@juliekadams

4 жыл бұрын

I'm so glad everyone said something about this. I saw another video or article that said to use wax paper. Parchment paper makes much better sense.

@lianne1001

4 жыл бұрын

How do I fix wrinkly HTV vinyl on a gildan shirt? I think I may have pressed it for too long.

Anything else you can use if you don't have multipurpose paper?

@atorres9628

6 жыл бұрын

4:48 She mentions that you "could actually probably use any spare piece of fabric", she just prefers to use the multipurpose paper.

@AlexOsbaldo

4 жыл бұрын

A Torres towel

I bought this from a company and it’s peeling before I’ve even worn it. How can I fix it if I don’t have that paper you’re using?

so when I press hard, it then leaves the outline of the iron, I try to kind of iron it out after, but just like when ironing a pleat, the bad ones stay forever!! any hints on that?

@shea-leighwhittingham3658

4 жыл бұрын

Hi Stacy, did you find out any tips on this? Would love to know x

@AGirlandaGlueGun

4 жыл бұрын

Does it stay even after washing? I would press over the whole thing to make it consistent. You can turn inside out and press it again as well.

I have a heat press and I find the very skinny delicate areas of vinyl peel a tiny bit after washing. The more solid thicker areas seem to adhere fine. I don’t get it

@soldiers360

5 жыл бұрын

I was having the same problem, so I bout some square's, they come in different sizes, they underneath the shirt, and raises just the area of the place your pressing. Haven't had a problem since. Hope that helps

@PMPerformance

5 жыл бұрын

lupe hinojosa that helps greatly! I think the ones I had this problem with, I was folding hoodies over to fit on the press creating too thick of a garment

@soldiers360

5 жыл бұрын

I ran into that problem as well, my press wasn't locking down cause of the thickness. But that's how we learn 👍

@PMPerformance

5 жыл бұрын

@@soldiers360 Mine actually was locking down as I adjusted it. But I was folding the hood and pouch part under creating a thicker pillow basically instead of wrapping the top layer over the pressing part. Yea all in learning. lol. I THINK that was my issue, but I have not pressed any with tiny details like that on hoodies since to test. The idea of creating a solid platform though is a great idea. Thank you for sharing

@soldiers360

5 жыл бұрын

The item I purchased is called Tee Pad it!!

Can I do it with wax paper??? Because my $15 Nike headband logo started to peel off it’s almost halfway off and I want to fix it because it was pretty expensive and I don’t wanna go out and buy that paper so

@AGirlandaGlueGun

3 жыл бұрын

I wouldn't do it with wax paper- you can use a thin cloth (like tea towel)

How long would you hold on a windbreaker type material?

@michaeldinh307

4 жыл бұрын

i have the same question. did you ever find out how long?

Does this work on glitter vinyl that is coming up?

@GhantFamily

3 жыл бұрын

In my experience it does! 😊

I have a question if you wash it and all of the heat transfer vinyl comes off what am I doing wrong.

@kenyoudigit

6 жыл бұрын

i got same question, can someone tell us an advice, thanks for the help in advance.

@bobboob713

5 жыл бұрын

Khen Escote She said early in the video that if it comes off you’re not pressing hard enough. + 15-20 seconds.

@AGirlandaGlueGun

5 жыл бұрын

I have done 100 shirts--and then I just made one and it would not stick! Some shirts have a coating from the manufacturer. fabric softener also puts a coating on it. So sometimes if it doesn't stick--its nothing we are doing! Sometimes it might be a cheap brand of heat transfer vinyl. There are lots of things that could be the culprit!

@juliekadams

4 жыл бұрын

I'm wondering if one can resort to fabric glue if the iron method refuses to adhere.

would cookie sheets do...? ...like a wax paper? because i don't know if we have multi-purpose paper in my country.

@AGirlandaGlueGun

5 жыл бұрын

You an use a piece of fabric or a tea towel

Does anybody know if this would work for the logo on a kappa jacket

@TIFFANYBUTTERFLY

4 жыл бұрын

I think so

@finallysoundasleep386

4 жыл бұрын

Most likely. I’ve had to do it on my kappa stuff and it’s worked

Is still gonna come off after 2 or 3 wash

I have a Liverpool shirt will it work on it as it's an airy shirt

@_sizza9994

4 жыл бұрын

did it work sir?im here for the same reason

Where do you buy the multipurpose paper

@houseofbows

6 жыл бұрын

Tigger Lilly expressions vinyl has it

I have the same iron, and I did it EXACTLY the same way you did; however, the lettering ended up sticking to the paper. I switched to a fabric, per your recommendation, and the same thing happened... Any suggestions? Thanks! From Erica

@330hockeygoalie

5 жыл бұрын

I just found out that it seems to work if you let it completely cool before you remove the paper. Took too ruined shirts to figure it out, lol. Good thing they were cheap ones from a carnival.

@juliekadams

4 жыл бұрын

Thanks for this tip BEFORE I make the mistake. I was picturing that this could happen and wondered if it could and what could be done, if so.

Where can I get a multi purpose paper?

@mirm2114

4 жыл бұрын

You can just use parchment/baking paper! It works very well!

@anissavgutierrez1828

4 жыл бұрын

Hobby and craft store

Bought a stone island t shirt and the vinyl ripped after 5 uses ... how can a brand like stonie have such quality

@matthewsmith8727

4 жыл бұрын

Because they are made in highly immoral factories in poor countries and you shouldn’t buy such products

i used a dryer sheet instead

I'm a 6'2" guy, and I'm pressing with all my strength, and the vinyl just won't stick to the t-shirt.

@juliekadams

4 жыл бұрын

Maybe resort to fabric glue.

@AGirlandaGlueGun

4 жыл бұрын

Too much heat can ruin the adhesion of the vinyl. Depends on what brand of vinyl you used- some knock off HTV's just don't hold up. ALSO- I had a shirt that just wouldn't hold the HTV. It had a soft finish to it and it kept falling off. I've never had that happen before ! So sometimes-it's just not fixable!

Do you think this process will work on a duffle bag? Thanks.

Does this work after you wash it and something peels up?

@AGirlandaGlueGun

5 жыл бұрын

yes! This shirt had been washed a couple times when I did this video!

@AlexOsbaldo

4 жыл бұрын

A Girl and a Glue Gun what if it peels off again after you wash it

looks like i'm the only guy here who had to watch this to fix my sweat pants that had vinyl that ripped after its second wear and wash

I ruined a $50 shirt using this method to try to re-stick. It was the Avery transfer paper that I was using. Pretty sure the Avery transfer paper is garbage to begin with. I even let it completely cool and it all ripped up on the paper.

Destroyed by juice wrld hoodie thanks

U

60 squids for delivery on a 80p piece of paper Naa lol

Skip to 3:35 for the solution

What’s your Instagram? Lol

@AGirlandaGlueGun

4 жыл бұрын

instagram.com/agirlandagluegun/

MY DUMBASS DID THIS BUT ON A BOMBER JACKET AND I JUST MELTED MY BOYFRIENDS JACKET I FEEL TERRIBLE OMG