Please never remove this video, you are a true gem!! I woke up to my parent’s oven beeping at 3am, thinking we needed to call a repair man or even replace but I thought someone would maybe have a solution on KZread and long behold i find this video with the same exact model. Thank you soooo much! My parents are on the older side so paying for a new oven or calling someone is out budget, very thankful for people like you.

@jpylp

7 ай бұрын

I am so happy to hear that the video was helpful in getting you parents oven fixed.

My wife and I were about to buy a new stove because we kept getting the beeping. We followed these directions and it's working again! Cost us all of around 25 cents rather than buying another stove. Thank you!

@jpylp

Жыл бұрын

That is great to hear! I am glad that the video was helpful in getting your stove running and saving you money. 🙂

Man, I had an awful day yesterday. We had to unexpectedly take one of our cars into the shop, and when I got home, our oven was beeping non stop. I applied your rubbing alcohol fix and now it's back to normal. I am so so thankful for your video, it truly made my day.

@jpylp

3 жыл бұрын

I am glad that this fix brought a small piece of positivity into your otherwise frustrating day.

Followed Instructions as per Video . Stove works 100 % -- Red Deer Reliable Parts quoted $440 for a new control board. Scams everywhere for the consumer !! THANKS for posting the fix .

@jpylp

Ай бұрын

@@nickcharney6536 I’m glad the video was helpful and saved you $440!😊

This error code appeared on my stove. My wife and I watched this video and did the cleaning exactly as shown and, lo and behold, it worked perfectly!!! Thank you so much for this perfectly done video of instruction!! It saved me many dollars not having to call a repair service!!!! Your instructions were clear and very informative!!

@jpylp

2 жыл бұрын

I am so glad that the video is helping people fix their issue and save money.

@karicorlo5113

2 жыл бұрын

I was scared for the sound! And tried touch any button for nothing, until I turn it on like I was going to use and it stop

You are a God send. My wife was ready to buy a new stove, watched the video and followed as shown and your fix worked perfectly. Thanks.

@jpylp

Жыл бұрын

I am so happy knowing that the video helped get your stove fixed and save you having to buy a new one!😀

Once again sir, you have assisted another household on avoiding a large bill and headache! This absolutely works! Thank you kindly!!!

@jpylp

Жыл бұрын

You’re welcome! am so happy to hear that the video is helping so many people.

Had the same error code on my in-laws stove, took less than 30 minutes to clean contacts and put everything back together. All buttons are working as they should and it saved us at least 300.00 .thanks for this video that was to the point.

@jpylp

Жыл бұрын

Nice! I’m glad the video helped.🙂

You are a stove fixing genius and my hero! Everything is working perfectly now, and the floor under my stove is clean for the first time in a long time lol Special mention for your clear and calm voice that made me feel confident messing around with a circuit board. And also for the hundreds of dollars saved, and weeks of waiting for service/parts. Cheers!

@jpylp

Жыл бұрын

I am glad the video was helpful to you and assisted you getting the problem fixed without having to fork out 💰. The clean floor under stove is a nice added benefit🙂.

@gingermoore9710

6 ай бұрын

Same!!! I actually had to do this a couple years ago and then couldn’t remember what in the world I had done to fix it. My floor under my stove is soooo clean. I stopped up the vacuum trying to get it clean….it was so nasty!! Hahahahaha!!!!

@KatTannockRealtor

6 ай бұрын

hahaha I love it!@@gingermoore9710

Wow, this video was a lifesaver. I’m not the handiest woman around, but this tutorial was simple enough for even me! No repair man needed. Thanks for blessing people with this knowledge. 👍🏻

@jpylp

Жыл бұрын

I am so happy to know that you found the video useful😀

Gotta love youtube and people helping each other out. Just happenedned to me last night. Did this in about 15-20 mins and no more beeping! Thanks.

@jpylp

3 жыл бұрын

I am glad to have helped and could not agree with you more. KZread is a powerful tool!

I woke up to the stove BEEPING non-stop! Yesterday, I pressure washed my mobile home and in the course of doing this water came through the vent over the stove - the moisture went into the panel in the stove and this caused the ERROR! Watching your video - I followed each step carefully and I am EXCITED TO SAY - IT WORKED! Thanks for sharing your video - it's truly a life saver!!!

@jpylp

Ай бұрын

Wow! That pressure washing stories a new one on me. 😊 i’m glad you found the video helpful.

You saved my cred! Washing dishes at my kids house I wiped down the stove. A little later that awful noise began. We unplugged it and I was assigned the blame. I found your video, my granddaughter, age 20, did most of the work as we followed your instructions. Hurray! It works!

@jpylp

2 жыл бұрын

You went from being blamed to being the hero (along with your grand daughter)😀. It makes me so happy to hear about stories like these!

@cordelia7313

2 жыл бұрын

I feel your pain!! I get assigned the blame anytime anything breaks around here. My husband is convinced I could break a lead anvil with a rubber mallet!!!! Glad you were able to fix it!!!

Had this error code today and my husband said "call the repair guy". I said sure thing, I'll do that tomorrow. I like fixing stuff myself so Googled it and found your video. Took me 13 minutes to fix on my own. I did use a blow dryer to help separate the parts as the glue was holding firmly. No obvious issue found but cleaned all contacts and the plastic shield side for good measure and it is now working perfectly. . Thanks for a great, easy to follow video!

@jpylp

Жыл бұрын

I am so happy to know that the video was helpful.

Excellent tutorial from start to finish. You left no steps out and you demonstrated each step of the process. I've been looking at so many videos to tell and show me what to do to remove the error code F11 . Your's seems to be the best. Thank you so much.

@jpylp

3 жыл бұрын

It feels good to know that the video is helping others solve this problem without spending $$$

I have a Frigidaire gas range. Had the same F11 code. Followed your direction, it is working now. Your video has a great value to the whole KZread community. Thank you.

@jpylp

3 жыл бұрын

I am glad to hear that it works on the gas range too. So happy it helped.

Oh man, I had this experience today and I am very grateful for this video! I was nervous as hell to pull the interface of the board off and clean it but so happy I did! It fixed the issue and I just saved myself approximately $250+ bucks!! Thanks again!

@jpylp

2 жыл бұрын

I happy to know that it worked for you 😀

Thank you so much for making this, saved me a costly repair and got me a working stove mid winter. Never take this down.

@jpylp

5 ай бұрын

I am glad to see that you found the video helpful.

Ty so much for this video. Fixed my error 11 as well. Took me a bit longer to do because I needed to clean underneath really well. My bigger concern is the amount of views. Fantastic for a job well done but I hope Frigidaire has fixed this dumb issue.

@jpylp

Жыл бұрын

Glad to hear it worked for you. I hope they have fix it too.

You are a genius! Thanks for solving my problem with the F11 error. I wasn't sure how much time you took to clean the panel, however, it took me a long time as I kept cleaning until most of the black was gone. My stove is at least 12 years old so perhaps I was lucky that it didn't need cleaning sooner. As all your other viewers stated, I am so thankful that you helped us solve our very annoying problem with the constant beeping that wouldn't stop without unplugging the stove. I am a happy woman now thanks to you!

@jpylp

2 ай бұрын

I’m glad you found this video helpful. It sounds like you indeed had a good run to make it 12 years without encountering this problem. I’m glad it is fixed now!

Very helpful video. I had a similar problem with my 1995 Toyota Tacoma not starting and I followed this step by step and now it works fine!

@jpylp

Жыл бұрын

While I was not aware that Toyota Tacoma’s had similar issues, I am glad to see that the video is helpful for that too!👍🏼

@TGA19

Жыл бұрын

​@@jpylp He's trolling 🤣🤣🤣

Thank you so much for taking the time to post this video. Followed your instructions and it worked like a charm. It was 30 minutes from the time we unplugged the stove until the stove was back in place and the wife and I were high fiving in the middle of the kitchen!!!!

@jpylp

Жыл бұрын

So happy to hear that!

You are a genius! Thank you so much. We have been without a stove for over a week. We finally tried this method and I am cooking dinner right now. We’re so grateful!

@jpylp

2 жыл бұрын

I am so happy to know that the video was able to help you.🙂

Wow, thank you! My stove is gas but a assumed the electronics part would be similar enough. Less then an hour later I was up and running. Instructions were clear and easy to follow. Easily saved me $250.

@jpylp

2 жыл бұрын

Fantastic! It is good to know that it works on the gas model as well. Thanks for sharing👍🏼

My husband and I were awoken at midnight by the beeping. We did exactly what you showed us and it worked!! Peeling off that sticky part was terrifying. It was really on there so we peeled very slowly. Thank you for your beautiful mind. God bless you

@jpylp

2 жыл бұрын

You are most welcome. I’m so happy to know that the video was helpful to you.

@judithslivinski3391

2 жыл бұрын

I used a blow dryer to loosen the glue a bit before starting the peel back.

Thank you so much this saved me from buying a new stove. Saves me about $1,000. This actually worked to perfection . Easy to do all it takes is time and a little elbow grease. Thanks so much again

@jpylp

Жыл бұрын

I am so happy knowing that you found the video useful and it was able to save you money.🙂

It worked!!! My husband and I were able to fix. Been waiting on a repairman for 2 weeks. So glad I came across this video! Thank you so much for sharing!

@jpylp

2 жыл бұрын

I am so happy they you and your husband were able to get it fixed.

THIS is awesome. Took me 20 min and it is working. I’m guessing if I called a repairman he would have replaced the unit for about $350 and then would clean and sell mine to another customer. Thanks for saving us an expensive headache.

@jpylp

2 жыл бұрын

I am glad to hear that it worked for you 😀

We had already replaced the board about a year ago. This time, we got the F11 code on Christmas. After viewing this email, I decided to try it out before calling for a repairman. This video really shows how easy it is. Thanks for posting this. It saved our Christmas dinner.

@jpylp

3 жыл бұрын

I’m glad you were able to get it fixed and enjoy Christmas.

Warning: when peeling off the black plastic, some of the black coating can come off. Be gentle. I also fixed this F11 issue today on my Frigidaire LGEF3046TFG, using electrical contact cleaner (WD-40 brand) with cotton swabs. We had the unit since 2019 (4 years) but I suppose the error frequency depends on usage.

Never get enough to saying Thank You! IT’s has been 5 days after fixing, working well! 🙏🙏🙏

@jpylp

9 ай бұрын

Glad to hear that the video was helpful.

4:45am here , beeping noise wakes me up. Follow step by step instructions and hold and behold, beeping is no longer. Thanks a lot! 🙌🏽

@jpylp

2 жыл бұрын

I’m glad it worked. That is definitely not a pleasant thing to be woken up by.

This video saved us when our stove started beeping and throwing this error code for no known reason at 2 AM on a Saturday!!! Thank you sir, for sharing your thoughts and knowledge with the internet! Who needs tech support that only operates between business hours M-F. Saved time and money for a replacement part. Thank you, thank you and now I can go back to bed!

@jpylp

2 жыл бұрын

I am so happy to know that this video was able to help you and so many others.

@davisbrewer6136

Жыл бұрын

Just discovered this video today after spending last two days examining control board and shopping internet for a fair priced control board, but gave up and put everything back together. Strangely enough, the beeping and error code disappeared, but the clock goes blank and will not set and display. Everything else seems to be working properly now, except for the clock display. Can’t explain why the beeping and error code has ceased. I will try your approach to removing the cover and cleaning buttons with alcohol that will hopefully correct the clock display issue. I will post update after doing the cleaning. Much thanks for your video.

Thank you brother. Followed your process, cleaned the contacts with alcohol, reassembled, and SUCCESS! Error code resolved, stove working again! 45mins start to finish. Note: hairdryer helped soften the adhesive to separate the black button cover piece from the contacts.😅

@jpylp

8 ай бұрын

Great to hear that the video was helpful. Nice tip on the hair dryer!👍🏼

This is the first comment I am doing it on any video, i woke up at 5.30 in the morning heard loud beep sound from my oven tried to unplug plug it back same thing started after couple of minutes, watched your video in no time its fixed. Its working fine now. Very informative video 🙏🙏 . Plz note i used ethyl alcohol thats what i found in my house again thanks again for saving my time and $$$

@jpylp

Жыл бұрын

I am so happy, knowing that the video helped get your stuff fixed and save you money.😀 thanks for the tip on the ethyl alcohol.👍🏼

Thank you, thank you, thank you. I followed your instructions and just saved myself at least $500 to have someone come and replace the control board. The stove works again. Best wishes to you and your family for a great 2021,

@jpylp

3 жыл бұрын

You’re welcome! It makes me happy to know that this video is helping so many other people get theirs fixed and save $$$. Happy 2021!

Video was spot on to fix this middle of the night beeping. I was ready to purchase a new range, but figured I'd give it a try. Only comment is that when you remove the face template, from the circut board, be careful of the circut template as well since I found they were both glued together.

@jpylp

Ай бұрын

@@alanrosencranz8692 great advice!👍🏼

Thank you so much. You saved my life and lots of $$$$$$$$. I was very nervous at first to pull the stove out and unscrew the back panel. I was even more nervous to peel off the black Plastic panel. Once I did it and started to clean with alcohol Q-tips - I started to gain more confidence. I kept telling myself I had nothing to lose if it would be broken so why not give it a try before purchasing a new stove when I bought it only five years ago. Low and behold when done when done after cleaning with alcohol as instructed- I plugged it in and BINGO! it worked !!!! Trust me it works and if I can do it. You can too! I’m a female in my 50’s and never in my life did anything like this on my own. I was nervous but with these instructions- I am beyond grateful. Thank you for the fantastic video. Much appreciated. If anyone is even hesitating and think it’s too much or scared I’m telling you don’t be. Just do it !! You will feel so proud of yourself when done and working

@jpylp

Жыл бұрын

That is so exciting to read that you accomplished it on your own.🙂. Good job!

Had same problem 2 years ago and didn't come across your video and ended up changing the whole board for 350$. F11 error appeared just now and followed your amazing step by step video and boom, back to normal. With New Year's Eve in 2 days you just saved me a total nightmare as part store was closed. God bless you !

@jpylp

Жыл бұрын

I am glad the video was helpful. Have a wonderful New Year!!!

Thank you so much! I cleaned the plastic strip as shown but the control panel itself had no contact points but the plastic overlay had a cable that plugs on to the underneath. I hadn't seen the cable when I removed it but managed to put it back. All is working now thanks to you. My model is Frigidaire Range CGEF3040PFA

@jpylp

5 ай бұрын

Glad to hear that it is working now!😀

@frodo246

5 ай бұрын

Actually, I spoke too soon. It worked for almost exactly 24 hours. After that it went back to flashing F 11 error plus all the constant beeping. Since I don’t use the oven very much and do not wish to spend almost $600 CAD, I just disconnected the cable to the keypad. Burners still work well. Thanks anyway. It was a good try.

I followed these instructions and in less than 20 minutes, fixed the problem. Saved $500 for a replace part! Thank you!!

@jpylp

6 ай бұрын

I’m so happy to know that the video is useful and helping you get it fixed and able to save you money!

All I can say is THANK YOU! Our oven was beeping incessantly and displaying the F11 Error message. I followed your advice and cleaned the contact points with rubbing alcohol. Error message -- gone!

@jpylp

2 жыл бұрын

I am so happy that this worked for you!

Thank you for helping me solve this F11 Error problem. We purchased a new AirFryer during the Black Friday event. Being anxious to try it out, we sat it on our stove and began to cook a couple of dishes. Little did I know the heat that these fryers put out ( and likely some of the fats and oils) and it wasn't long before we saw the F11 Error on the stove display. I thought we had melted the display. I found your video and thought I might as well give it a shot considering a replacement module was $ 500. Following your instructions I was able to get out of this jam with a life lesson (read your user guide - fryer must be at least 10 inches away on all sides). Thanks

@jpylp

8 ай бұрын

I am glad the video was helpful. Also, good to know that bit of info about the air fryer!👍🏼

Once I figured out how to remove the screws...your video was EXTREMELY helpful! Thank you for posting.

@jpylp

2 жыл бұрын

I am glad the video was helpful.

Thank you so much - we have a slightly different model, but a 2:30 beep attack woke me up and I found this video trying to figure out what the problem was. The range is 8 months out of a 5 year extended warranty, and I really didn't want to replace it or pay for an expensive repair. Had to go to the hardware store to get a special bit to remove the back panel, but otherwise everything went just like in your video. The hardest part was moving the stove in and out of place, and finding the courage to peel the cover off the panel. But, after cleaning all the buttons on both sides, I put it back together and it worked!

@jpylp

Жыл бұрын

I am happy to hear that the video was helpful and able to save you money. I agree, it can be a little unnerving peeling that control panel apart.

omg you're amazing! im alone at my house and the oven started beeping at 3am. I watched your video and now everything is working perfectly! thank you sooooo much1!!

@jpylp

11 ай бұрын

I am so happy that the video helped you fix the problem (and hopefully get back to sleep)!

5 star video. Saved me hundreds of dollars and maybe days waiting for the part, as I thought I would have to replace it. Of course I could unplug the unit and use the stove top by lighting the burners with a match, but no way to use the oven without the repair. Thank You.

@jpylp

2 жыл бұрын

I am so glad that it worked for you!

Best video on this issue! I watched 20 videos trying to figure out how to fix my stove and this one is the best step by step clear view of the process awesome thank you!!!

@jpylp

2 жыл бұрын

I am glad to hear that the video was of value to you. Thanks for the kind words.😊

I just watched your video and will tackle this repair tomorrow. You just saved me a thousand bucks as I was going to replace rather than repair. I did have a suggestion I wanted to mention. You said you had done this repair twice so obviously moisture keeps creeping back in. What I'm going to do and you might do on your next repair is apply a thin layer of CRC dielectric grease to the contacts that keep getting corroded. I'm going to use a q-tip and will have to be very careful because this grease could cause problems if it gets on the adhesive that holds the panel on. I use this grease all the time on electrical connections of all types. Thanks again

@jpylp

2 жыл бұрын

Applying a thin layer of CRC is a great idea! I’ll be curious to find out how it works for you.

@AndyFL64

5 ай бұрын

Well, it's been a year and no further problems so the dialectric grease seems to be a good idea at preventing moisture getting back in. This stove is used every day so if moisture was going to get back in, it probably would have by now. @@jpylp

@jpylp

5 ай бұрын

@@AndyFL64 great to hear that. Thanks for the update!👍🏼

Woke up to the stove angrily beeping at me and F11 Err on the display. 1, 2, and 3 buttons inoperable. Did the procedure in the vid and we are back in business. Thank you good sir!

@jpylp

2 жыл бұрын

Nice to read another success story. Merry Christmas!

Awesome video! Our appliance repairman told us to buy a new oven because new control panels for our model are no longer available. Watched the video and my Whirlpool oven now lives to see another day! My only comment is that you have to be careful to peel off the right layer. The first layer I peeled off was the outermost layer and was on top of the contacts that I needed to clean. I then peeled off the next layer and had access to the contacts to clean them. Thanks a lot for taking the time to make the video.

@jpylp

2 жыл бұрын

I am so glad that this worked and you didn’t end up buying a new oven. Nice tip about peeling the layers👍🏼

@timothymanning5756

2 жыл бұрын

I made the exact same mistake this morning, and my first cleaning didn't work. I watched the video again and realized I was cleaning the wrong side of the keypad. Cleaned the correct side, and everything is fixed.

@jpylp

2 жыл бұрын

@@timothymanning5756 I am glad that you got it fixed!

“Wowzer” just have to say how much I appreciate you videoing this demo. You saved us a ton of money you don’t even know. Could not believe it was that simple. Thank you thank you and thank you

@jpylp

2 жыл бұрын

I am happy to know that this video has helped you get it fixed and save you money. 😀

This worked. I had this happen once before but the repair people that came out just told AHS that the whole unit needs to be replaced. This time I fixed it myself and save myself $100 call to AHS.

@jpylp

Жыл бұрын

I am glad that it worked and you were able to save some money this time! 👍🏼😊

Thank you so much. I followed your steps and could easily see the condensation in the panel. Itworked. Thank you for saving me the repair bill. Blessings for you and your family sir!!❤❤❤❤

@jpylp

26 күн бұрын

@@denisha448 I am glad that the video helped you fix the problem. Thank you for the blessings.😊

got the F11 error, tried the reboot (failed), google searched, found the video. 30 min later plugged range back in and problem fixed. Thanks for putting this on youtube!

@jpylp

2 жыл бұрын

You are so welcome😀. I am glad that it worked for you. Thanks for the comment.👍🏼

Thanks for the video I replaced eoc 2 yrs ago and it failed again and was not happy especially since price doubled. Thank you for taking the time to show this repair very well done 👍

@jpylp

2 жыл бұрын

Thanks for your comment!🙂

Thanks a lot! Same error happened to my Frigidaire range. Glad I found your video before I freak out and spend $$$ replacing the entire panel.

@jpylp

4 ай бұрын

I am glad to see that you found the video useful and were able to save $$$

Got the code, googled, scrolled through vid, repaired, done. Props. Merci.

@jpylp

2 жыл бұрын

Your welcome. I’m glad it worked for you.

Thanks for your help! You saved me lots of money and inconvenience! Followed your instructions, and the error disappeared. Viewers: handle the circuit board carefully, I bent a component but the connection didn't break so I was lucky there.

@jpylp

Жыл бұрын

I’m glad the you found the video helpful. Good tip about handling the circuit board. 👍🏼

Thanks. You just saved me anywhere from $130-450 in replacement parts

@jpylp

Жыл бұрын

Good to see the video helped you keep your cash.👍🏼

Thank you so much for your video. It fixed our problem and saved us money we really didn’t have to have it fixed. We are retired and on a fixed income so this was a God send. Thank you! ❤️

@jpylp

3 жыл бұрын

I am so glad that my video was able to help you get it fixed. God Bless!

Yup. Worked for me. saved me $300 for just the price of the part. Thank you.

You saved my bacon!!! Just did a deep clean on it and got moisture in the panel on #3. Had it back up and running in less than 30 minutes!! You’re a hero.

@jpylp

10 ай бұрын

I am glad that you found the video helpful.

Thanks dude! Different button layout for me but still did the job with hand sanitizer I didn't have any alcohol rub Saved me money and a headache. Appreciate it.

@jpylp

Ай бұрын

@@user-ql7ux2mv8c i’m glad it worked for you. Nice tip on the hand sanitizer.

Just did this and it worked flawlessly. Thanks for saving me some $$$ and headache from that beeping.

@jpylp

2 жыл бұрын

I’m glad that the video helped.

Thank you so much. It worked exactly like you showed. I think in my case that the glue had melted from maybe steam and heat coming off the stovetop. Cleaning those contacts fixed the problem. I had gone to a technical website and they said the board had to be replaced--no other solution. Well, I am glad I found you. You are my hero.

@jpylp

Жыл бұрын

I am glad to hear that it worked for you. Good thing you were persistent and kept looking for a solution even after the technical website said to replace the board. 🙂👍🏼

I vote for this video as the single most useful video on the whole Internet. I watched the video, followed the steps and my stove is fixed. Many hours and dollars saved. Thank you!

@jpylp

2 жыл бұрын

Thanks for the high praise. I am happy to know that this video is helping people get their stove fixed and save them time & money.

Today I woke up to a beeping stove with f11 error code. Thank God I found your utube video. ( same exact stove as mine ) You made it a "very" easy fix. Thank you so much.👍👍 Have a great day

@jpylp

2 жыл бұрын

I am happy to know that the video was able to help you fix this😀

You, rock. 12 months in having this thing, great oven (convection) great range. However, the design of that touch panel is a disaster. Long story short, warranty repair, touch panel, F11 Error. Woke up the other night, midnight, beeping F11. Just got it all clean, both sides of the touch panel, and fiinally cooking dinner. The problem is, the touch panel piece in between the outter layer and the panel electronics, isn’t sealed. Grease leaches in, duh….. Bad design. THANK YOU!!!!!

@jpylp

Жыл бұрын

You’re right about the design of the touch panel. I’m glad you found the video helpful in silencing that beeping. 🙂

I can attest that this works. Thanks again. This trick Kept the in laws from buying a new stove. And I was the hero of the day. Lol

@jpylp

2 жыл бұрын

I’m glad it worked for you. Happy in-laws, happy wife = HAPPY LIFE 🙂

wow. it was amazing. it works. we watched the video. we followed your instructions and voila the oven is back to normal. thank you so much for sharing.

@jpylp

2 жыл бұрын

I am so happy to know that this video helped you.

Well, a day later and my stove is now fixed. The corrosion on mine was on the same dime shaped button terminals. I did the initial cleaning with a Tub O Towels wipe...used my finger so only my fingertip was pressing the cleaning wipe on the section I was cleaning. As you said, I didn't want to do anything to reduce the adhesive since it would be needed to put the panel back on. I then used the swabs with alcohol like you did in your video. Let it dry, then I applied some of the CRC dielectric grease. I only applied a small amount per dime-sized terminal. I also applied a thin coating to the plastic peel-off panel, the dime sized space directly behind the button. Plugged in to check before I put everything back together....worked like a champ. Before I put everything back together I used some of those Tub O Towel wipes to clean the front of the panel. Also pulled the knobs off and cleaned them and the panel face. Those wipes cut through the baked on grease like a hot knife through butter. Looks like a new range. Happy Wife, happy life.

@jpylp

2 жыл бұрын

Great job taking this fix to the next level!👍🏼😀

Man thanks I was literally about to hit the submit payment and buy another one but I was like let see what KZread say I took it apart and I saw where the issue was cleaned and now working like a champ YOU CAME THROUGH IN THE CLUTCH

@jpylp

3 жыл бұрын

It makes me so happy to hear that the video was helpful and able to save people $$$.

Thanks for for this video. It saved me hundreds of dollars and my stove works perfectly now.

@jpylp

Жыл бұрын

Happy to hear the the video was helpful.

Thank you! Came back after a vacation and heard/saw this error on the stove. Super easy fix!

@jpylp

Жыл бұрын

So happy to hear that you got it fixed.🙂

Just did this and can confirm that it worked. Thanks for saving me some $$$. Great video.

@jpylp

3 жыл бұрын

I'm glad it worked for you.

This still works. I literally just got done an the stove works again. I did mess up though, I took it all the way off. There are two skins so only do the first layer lol. Thanks for the video you saved me a service call.

@jpylp

Жыл бұрын

Nice tip on the only doing the first layer👍🏼

This video saved our Christmas celebration! Can't thank you enough for your clear instructions. Merry Christmas!

@jpylp

3 жыл бұрын

I am so happy that you were able to fix it and enjoy your Christmas celebration. Merry Christmas to you too!

@1Khr0n0s1

3 жыл бұрын

I'm in the same situation. Thank you man for doing this video! Now my dad an I are trying to fix it. Merry Christmas! 😁

@jpylp

3 жыл бұрын

@@1Khr0n0s1MERRY CHRISTMAS

Thank you so much. This fix worked like a charm. I used a utility knife to separate the thin plastic cover. That's the only tricky part.

@jpylp

10 ай бұрын

I am glad to hear that the video was helpful to you. Nice tip using the utility knife.👍🏼

I followed your cleaning technique and procedure on my fiends stove and it worked thank you so much for your help

@jpylp

Жыл бұрын

I am happy to know that the video was helpful.😀

By far the most helpful video I have ever seen, it took 10 minutes and the range works fine now, thanks!

@jpylp

2 жыл бұрын

I am so glad to hear that it worked for you!

Awesome fix. I'm sure a repair guy would suggest a whole new control module at $400. One of the best, well described and shot home repair videos I have seen. Thank you, Thank you, Thank you. Like Red Green says - 'If the women don't find you handsome, they should at least find you handy.'

@jpylp

2 жыл бұрын

Thank you so much for your comments. I am happy to know that the video was helpful.

Thank you. This just happened to my stove. It took about 15 minutes to do the whole process and it's fixed.

@jpylp

9 ай бұрын

Nice to know that the video was helpful to you.

Fix worked! Thanks for saving me nearly $400.00 in parts replacement alone.

@jpylp

Жыл бұрын

I am happy to see that the video helped you get it fixed and save money!

This error code appeared on my stove. I just watch your video. IT WORKS! THANK YOU SO MUCH FOR YOUR VIDEO. You just save us money we did not have.

@jpylp

2 жыл бұрын

I am so happy to know that the video helped get it working and save you money. 😀

So where do I send the check?? Lol. I was a day away from buying a new range oven & came across your video. BAM! Fixed. Appreciate your video. I have a KZread channel myself & know the power of information. 👍👍

@jpylp

3 жыл бұрын

I am happy it helped. I agree, KZread is a good resource for information.

This saved me over $400 in parts. It did the trick.

@jpylp

Жыл бұрын

I’m so happy to see that the video was able to save you over $ 400!

Thank you!! This worked! (So ridiculous that this happens--you're right: every couple of years) 😣 we replaced the control board about 2 years ago...could've saved a few hundred bucks!? MAJOR DESIGN PROBLEM...THE COMPANY SHOULD HAVE A RECALL ON IT OR SOMETHING!?

Great video! We successfully fixed our problem following your through instructions. Thank you for sharing@ Hardest part of the process was physically moving the oven.

@jpylp

Жыл бұрын

I am happy to know that you found the video useful.

Sherry Stagnaro. OMG This video saved my life, and I'm sure the cost of a new stove. I had no idea what was wrong or what to do so I followed his steps one by one and it was very easy the way he explained it and demonstrated just what needed to be done. Thank you!!!!!!

@jpylp

2 жыл бұрын

I am so happy to know that the video helped you get it fixed and save you money!

Thank you so much for this very helping video. I fixed my stove which has the same error by following the steps you mentioned. Thanks a lot again.

@jpylp

Ай бұрын

I am happy to hear that you found this video helpful.😊

Follow your steps by step and fix mine today. Thanks for saving me bills for the Christmas 🎄 holidays.

@jpylp

7 ай бұрын

You’re welcome. I’m glad to see the video is helping people.😊

God Bless YOU man! I really didn't want to come out of pocket to fix this after the holidays. I appreciate this video

@jpylp

Жыл бұрын

Happy to see that the video helped get your stove going without having to fork over $$$!

Thank you so much for these clear instructions. The video saved us from waiting weeks for repair or buying another range!

@jpylp

3 жыл бұрын

I am so glad that the video was helpful.

Very nice 👌 video, I had this issue. According to this video, I opened, cleaned and closed the stove and error disappeared. Thanks for sharing this information to save money 💰.

@jpylp

2 жыл бұрын

I am glad the video helped😀

I am learning a lot from these how to videos since I prefer to find easy fixes to complex appliance break downs to save money. My Electrolux stove symptoms are the opposite of this one on the video. When I touch the glass panel (its not plastic) or when the timer goes off it doesn't beep anymore. I viewed other videos where a pencil eraser is used to clean the ribbon cable for different touch panel symptoms and now this one on cleaning the contacts with alcohol and a cotton swab.

I am experiencing the same problem, and just wanted to say thank you in advance as I am about to go and give this a try.

@jpylp

10 ай бұрын

No problem. I hope it works for you. Let me know how it goes.

Good video to show how to fix it! I’m an appliance repair man and unlike most I always try this before ordering a new part. I must say that your overlay looks like it is getting worn on the backside. Next time it acts up I think you should replace it. Good job though!

@jpylp

2 жыл бұрын

Thanks for the advice regarding the overlay!👍🏼

Thank you for your great tutorial, my frigidaire Gallery show the Code F11 late last night we were wondering where that noise was coming from till we find out it was the Oven. I jumped on KZread then 40 minutes after the beep was gone. Thanks again for your great generosity. From Montreal, Canada

@jpylp

2 жыл бұрын

I love to read that the video is helping people. Thanks for your comments👍🏼😀

@karicorlo5113

2 жыл бұрын

Yo solo se me ocurrió prender la mecha de la estufa y se apagó al momento

Used this method yesterday on my Frigidaire gas stove. No beeping now. Thanks

@jpylp

2 жыл бұрын

I am a glad to know that it worked for you!