I use another model of this printer but the tip fixed it. I am so happy been trying for so long to fix it!

I learned the back part came off on my ET-2800! I clicked a little white plactic part back into place and now it works again, thanks.

@lindabradford9591

Жыл бұрын

How'd you get if off? I have the same model. Thanks in advance.

@shanna-kayepowell8360

Жыл бұрын

​@@lindabradford9591did you figure it out?

@lindabradford9591

Жыл бұрын

@@shanna-kayepowell8360 no

@lindabradford9591

Жыл бұрын

I had a little piece stuck and took needle nose pliers in the back where the paper goes and got the piece out, cause I saw no way to remove the back cover. Hope you can help in case it happens again.

@shanna-kayepowell8360

Жыл бұрын

@@lindabradford9591 I found out today...the top can come off completely. First, you have to pull out and up the display screen, then pull down another part under(the part with the serial number). Lift gently the display screen and it will lift the top to a small degree. To the left side where the power button is, there is a little sliding part you have to slide it through a little maze thing. Then it will lift completely. Now towards the back, there are two parts you squeeze together to snap out the top. Lol...no screws involve just snap snap....while doing that I accidentally temporarily fixed my feeding issue. The feeding ball at the bottom fell out. I somehow wondered if I can print without it, tried it and it worked, only downside, can only fit one paper in at a time. I saw a video showing how to turn over the printer and put it back in...I'll do that some other time. Right now I have work to do and can't risk it not working again

Thank you for posting this, I appreciate you! Going to try this on my printer❤

I wa so relieved when you showed me how to remove the back plate… I had cut my thumb trying to remove my jammed paper

THANKS!!! Finally something worked!

Thanks for posting this. Going to try this.

Thank you this worked!

It worked i just simply dry-cleaned it ! Thank u

Thank you!!!! a video that was actually helpful!!! my printer is working again it was the little switch for me but now i know how to clean the rollers

@shaniquareed8653

8 ай бұрын

Never knew there was a door back there, I will try it as soon as I get back to my desk

Thanks! I didn’t even have to go this far with cleaning it- it turns out something fell inside and kept misaligning the paper while being fed through 😑 I thought the new Epson eco tank et-2850 was junK before I even got to use it.

Many thanks for sharing. I've had this problem for a few weeks now and wondered if there was a solution? Will try this, seems straightforward enough. Cheers.

@DanielJohnHowTo

Жыл бұрын

you can try what i said in the video and/or different paper if possible.

YOU ARE THE BEST!!

This video saved me , i never Knew there was a bck panel, thank you

GREAT JOB! THANKS FOR THE TIP HOW YOU TAUGHT TO OPEN THE BACK OF THE PRINTER WHERE I GOT MY JAMMED PAPER WHICH I WASTE LOTS OF PAPER THOUGHT THAT THE JAMMED PAPEPR WAS INSIDE BUT NOTHING INSIDE IT WAS THEN I SAW THAT ITS AT THE BACK WHERE THE PAPER JAM..THANK YOU AND HELP ME LOT!!👍😍🥰

@DanielJohnHowTo

Жыл бұрын

You're welcome!

@jamirchowdhury1432

Жыл бұрын

Me too.

😄Very helpfull video

What alcohol dilution do you recommend?

Thank you, Sir!

Would the inside rollers be the cause when the paper feed stops half way into the feeder?

@OnthLvRoad

2 ай бұрын

I had the same issue and I repair it a few hours ago after disassemble the device 6 times... The first time I found a torn paper that was 2x2cm from last year (I recognize the document). Then a scan error appeared, I disassemble again and failed but that allows me to understand how to disassemble the upper part of the device entirely. My problem was that my paper can't slide so the last time, I disassemble the whole thing and I really check all the little hole where the paper should slide and I found my bunny's pellet (3mm) in the middle hole... I took it with a barbecue stick with a double sided adhesive paper at the end. I used "Kevin at bch" channel with the video named "100016 scanner error" (there are 2 videos I watched both of them). If you don't have warranty like me anymore, I truly recommend to try this. And make a camera record while you disassemble so that you know the place of every piece. I recommend to be with someone to help because I couldn't do it on my own. I hope this will help !

I’m having issues with it pulling the paper in the right corner is catching and it’s getting stuck or pulling the paper in wonky. What can it be

I can't remove the back part on my et-2726, I don't know what to do with that phantom paper jam... Can someone help please

I have a Epson ET-15000 how do you take the paper tray off of the rear feed to clean those rollers? Thank You

@DanielJohnHowTo

3 ай бұрын

I would refer to the epson website and user manuals as that printer is quite expensive you wouldn't want to break anything and I can't advise properly as I don't have that model unfortunately.

@meme37769

3 ай бұрын

Thank You @@DanielJohnHowTo

I had to take back panel off to clear paper jam. Now I can't get the back on properly because it won't feed paper at all. Is there some trick to aligning the back panel? Thanks

@DanielJohnHowTo

Жыл бұрын

the part that you squeeze two bits together??

@IxBATMANx

Жыл бұрын

Get a good look at the backside of it it has tracks the gears on the side sit on, it goes in pretty straight

Please use a stronger microphone.

When cleaning a small expansion spring came loose from below bottom roller does anyone know where this attaches to

@sandrata8807

7 ай бұрын

i think i have the same issue! did u end up fixing it?

i think a tension spring fell out when i tried to clean it 😳😳 how do i fix this? my paper won’t roll

@valariehogue5793

14 күн бұрын

Omg same thing happened to me!

test run?

Would that cause my printer to print crooked ? My printer is printing crooked !

@DanielJohnHowTo

8 ай бұрын

check the paper is seated right and guidelines are where they need to be.

@Eatcrow

8 ай бұрын

I have the same crooked paper problem! Despite it being tightly within the blue tabs it drags one side of the paper down and feeds it through at an angle and it folds the corner when it feeds and doesn’t print properly. Printer is 18 months old ET3800 and done 2 whole sets of ink. Thanks for the back panel tip, I will take it off and report back …

I don't mean to be critical but you need a stronger microphone I can't hear you and it seems to me a lot of other people are the same way looks like a good video we sure could help have help

@DanielJohnHowTo

Жыл бұрын

turn volume up, filming inside it should be fine

Sir high quality me print nhi kr sir is pr video up load kr dena sir printer ka sansar kharb bta raha h l 4260 Epson sir please

I have had my printer for 2 weeks and this problem happens waaaay too often. I want to like this printer but I just can't. I'm so desperate for a printer cuz my HP is requiring $100 ink refills

@DanielJohnHowTo

5 ай бұрын

if you do a lot of printing and have paper jams it could be the paper because I had the same issue

What happens if you do this and it DOESNT help? Says paper jam or foreign object and theres no paper jam- it was happily printing away and then just STOPPED. I have one day left to send it back and i know its not broken... wits end. SOS

@DanielJohnHowTo

2 ай бұрын

if you have tried everything, then it could just be faulty.

Very helpful. I have this printer and also a ET2600. Would you advise the same procedure for that as well?

Man, someone should reinvent printers, this is dino technology

CAN'T HEAR YOU

@DanielJohnHowTo

11 ай бұрын

turn the volume up