For those who think this is too complicated, try breathing into the gap between the mouse and the mouse button, this will discharge any static electricity build up causing the double clicking issue. (Works for me)

@lexkoal8657

3 жыл бұрын

Worked for me for at least some time. Thanks!

@ryanwiranto8125

2 жыл бұрын

yo thanks this actually fixed the issue but i don't know for how long

@leesoonyang5590

2 жыл бұрын

@@ryanwiranto8125 yea I think it only work for some time, I'm still blowing my mouse everytime the issue occurs

@SuperKurvaszad

2 жыл бұрын

I can't believe this worked lmao, ty

@aceee1337

2 жыл бұрын

it worked lmao wtf

Searches video to save money instead of buying* Me: *watches vid with no clue in fixing a mouse Me: ok ill just buy a new one

@pwrOverwhelming

4 жыл бұрын

definitely buying a new one instead doing all of this

@AntonNb

4 жыл бұрын

Useless..it's really easy ..just a simple soldering and only like 3cent to replace the switch with a new one

@argumengenichyperloquaciou4115

4 жыл бұрын

Anton Nb Useless.. It's really easy to fix the switch without replacing and instead retention the spring. Totally free. Wait what's "useless" mean in this context?

@AntonNb

4 жыл бұрын

@@argumengenichyperloquaciou4115 I was refering to pwroverwhelming comment ..I was being sarcasm since its just simple soldering no need to buy a new mouse ..it's only 1 cent less (price one Omron switch)

@thelibrarian7193

4 жыл бұрын

@@AntonNb yup, its true if u already hve all of the stuff u need. like that soldering machine cuz im sure that aint cheap. and i dont even hve one.

You don't need to replace the switch, most of the time the problem is not the switch, but the build-up of static electricity when your room humidity is too low. I just blow in-between the spaces of the buttons so that the hot air from my breath will increase the humidity inside the mouse and discharge static electricity. It works for me so far, but I do admit it gets annoying sometimes since you have to blow it occasionally. One option is to fix the humidity of your room since it could affect your other electronic gadget as well, but that isn't easy. My room is always around 18 to 20% humidity so my place is highly susceptible to static electricty. Check yours if you have the same problem as mine, it might save you the trouble of opening and replacing a switch. 👍😀

@Megabrukman

3 жыл бұрын

Thank you so much! It worked for me

@intheendwerewenevermanttob1110

3 жыл бұрын

so, the all I need to do is use blower or someshit to fix my double clicking mouse? Should I just clean em?

@camelCased

Жыл бұрын

@@intheendwerewenevermanttob1110 No, a blower might not help - it's not humid, unlike your breath.

@jhansenduca1478

Жыл бұрын

I know that its been 2 years but wtf it worked. thank you so much!

@rajeshcb9253

Жыл бұрын

thank you man , it worked

To anyone watching this trying to disassemble the mouse. Make sure you take off 3 screws at the bottom the 3rd one is beneath the triangular Logitech sticker. See @:023 the sticker is punctured. Hope this help and that no one has broken their mouse with this step missing.

@roy.v

2 жыл бұрын

ahhhh I read this comment 10 mins too late. HAHAH

@Billy-zf8yn

2 жыл бұрын

@@roy.v hope u ddnt break anything!

@banghieu5190

2 жыл бұрын

you save my mouse haha thank you

I too had the double click issue on two of my g102's and one Ikari Optical. Just re-tensioning of the spring and cleaning of the contacts with Alcohol have fixed the same double clicking issue on the most used left click switch on all three mice. People should try that before replacing the switch altogether. I was just about to order switches online and decided to do the above on one of the mice just as an experiment and am glad it worked. Saved 3 mice from the trash. The Omron switched on amazon India are 800rs for 4. The 2nd G102 i bought I was thinking its only 500 more. Lets just get a new mouse. a year later the double click issue popped up again. Glad did not buy a more expensive mouse this time. Many thanks to the guy who shared the switch repair stuff on youtube and instructables.

@waskitodwiwicaksoputro7810

4 жыл бұрын

can you explain it in more detail? mine also has the same problem.. how to re-tension the spring and clean the contact exactly?

@bangqae1903

4 жыл бұрын

You should make a video about it

@xyz2001xyz

4 жыл бұрын

Uh, how does one do the double click in the first place? I need to know

@MrTooawesomeforaname

4 жыл бұрын

@@xyz2001xyz Basically, when you click once, the computer register it as 2 clicks. Which makes holding the button a chore.

@xyz2001xyz

4 жыл бұрын

@@MrTooawesomeforaname I wanted to know how to make the mouse double click, but yea, wanted to slightly abuse it :p

This is a big help, I just get an old dell mouse and get the left mini box click and replace on the g102, and it's now working fine. thanks, man!

Omron Japan switch is like 8 times more expensive per switch but 10 times better rated durability (5M clicks vs 50M). Interesting...

@Tox666

5 жыл бұрын

yeah.. u right omron japan is much better than the omron china

@jakubu2055

5 жыл бұрын

nah Japan switches (D2F-01F-T ) are rated for 1M clicks, operating force 0,74N(obv, they last longer than 1M). Omron d2fc-f-k(50m) (varitations omron d2fc-f-7n(20m) or 10m or 5m) - Chinese, are rated for 50M clicks also force on them is lower idk if thats better 0,44-0,74N,

@paoloumali4280

5 жыл бұрын

It's a lie. All these mouse fixes you are seeing online are mostly Omron. Guess what the model is? OMRON D2FC-F-7N

@fakrulibra6364

4 жыл бұрын

@@jakubu2055 Japan Omron uses gold contact making more durable than Chinese's despite its 10 million click lifespan

@yubinator7455

4 жыл бұрын

@@jakubu2055 is the D2F-01F-T worse than the D2F-01F?

This worked out for me. As someone else stated in the comments, the Omron Japan switches stick out a little bit further than the original switches, so the mouse is a little more sensitive to clicks than usual. Aside from that, it seemed to have worked out fine for me so far. The only thing I really wish I had at the time was something to hold the PCB with as trying to hold the PCB and soldering iron was a total PITA when attempting to desolder.

You can repair the buttons too. I didn't replaced the button instead put little amount of mustard oil on buttons in a way it gets inside the box. I used to do it to fix my radio controller car's remote. It works in this case too. Oil helps remove static energy which makes the switch work normally m

I don't know anything 'bout soldering. For people like me, if you have a spare/defective (not the clicker) mouse, try prying and opening the clicker/button box; Replace the copper hammer/spring. Other springs don't look the same as the G102, but you can trim some parts of the spare spring to let it fit.

Planning to do this soon. I did the non-solder version a year ago - just open it up, clean up the metal parts with alcohol, then bend it. The double clicking came back again recently lmao. Thanks for this tutorial. Edit: I successfully done it yey! I didn't have any soldering removal tools like a sucker or wick. Just followed what you did in the tutorial without touching the PCB.

@icemotion1925

2 жыл бұрын

Hey man, mind sharing the size of your screwdriver?

i had old microsoft mouse and keyboard..still wrks with perfection(i mean these are those cheape models...but boi thy are strong)..i buy costly logitech mouse for gaming..double clicks..

@shawndarlly819

3 жыл бұрын

you can sell them for 1 candy

Man, you so brave, I'll never touch the pcb that I'm working on.

may i ask what screw driver you used? the middle screw doesn't get loose for my mouse. but the 2 in front can be removed

Yoo i just fixed my G103 with this tutorial (basically the same as G102). Protip, you can use switches from other mouse that you have lying around. I salvaged a switch off some random mouse I had then put it into my G103 and works like brand new. Had a lot of trouble with soldering but that's because I suck at it. Hope this comment can help!

@pogi2555

3 жыл бұрын

Did your skates get somewhat ruined?

@HelloAmDog

3 жыл бұрын

@@pogi2555 Slightly, but not completely, it's still very usable with the addition of some new thin double sided sticky tape on the old skates

@pogi2555

3 жыл бұрын

@@HelloAmDog thank you!

@marqueemolina6929

3 жыл бұрын

Whats the screw driver size ?

@HelloAmDog

3 жыл бұрын

@@marqueemolina6929 A small phillips head screwdriver will work very well. I used a small hobby screwdriver and worked well!

Why there are some leftover parts after I followed the video step-by-step?

Wow really amazing it really fixed my problem cuz I bought a new one.

@MrUbercool007

4 жыл бұрын

lol

Where did you buy the switches

Is it possible to switch the place of one of the side buttons to the left mouse button instead?

@raja7775

3 жыл бұрын

Good question. That might possibly also mean you won't have to buy a new switch

What size of screwdriver u used?

@ablindpikachu

3 жыл бұрын

Not OP, but I was able to open it up with a #0 Philips head..

I successfully replaced my click switch. FYI - I took my old mouse and pulled it apart. I removed it's thumb button 2 and soldered it in place of G102's left click. Voila! It worked! I couldn't order replacement as lockdown does not permit deliveries! So even your old mouse switch will work as long as it's of same size!✌🏼

@ElectroBytezLV

4 жыл бұрын

How long did it take till the mouse started double clicking?

@ninad7478

4 жыл бұрын

Well, my mouse stopped completely working because I ordered new click switch and burnt the contact on PCB. I'm never going to buy Logitech again. There are better mice available for less than $10 in India.

@ElectroBytezLV

4 жыл бұрын

@@ninad7478 yeah but how long it took before the mouse started double clicking?

@ninad7478

4 жыл бұрын

@@ElectroBytezLV 6 months of CSGO

@ElectroBytezLV

4 жыл бұрын

@@ninad7478 I see, thanks. Hope it lasts me for awhile.

Sorry to Necro an old video, where did you buy your Omron Switches? I'd like to buy those Japanese model ones! Thank you for the very helpful video!

Which type of screwdriver is used?

NO NEED TO OPEN DOUBLE CLICK ISSUE FIXED!!! Issue: Whenever you click once the mouse registers a double click. It causes problem to drag and click. FIX and EXPLANATION: This issue is caused by static electricity buildup inside your mouse (if the mouse isn't broken). To fix this, simply breathe into the gap between the mouse and the mouse button. Our breath has enough moisture to discharge the static electricity. This should help in removing the static electricity buildup. Generally when the environment is of low humidity or the buttons are clicked in rapid succession, static electricity tends to build up. This is a common problem in mouse since there's no other way for the static charge to be discharged.

@user-jd1di7uz7r

4 жыл бұрын

Dear Navneet Kr! Thank you! Thank you so much! Your advice helped me. It worked! So much troubles avoided. So much nerve cells saved! Let me shake your hand!

@other844

4 жыл бұрын

This helped for just 30 minutes :D

@user-jd1di7uz7r

3 жыл бұрын

@Tragic Excalibur Hi! To tell the truth I cannot say for sure. I just can say how it works for me. I wrote my comment 4 weeks ago. And yes. The advice still works)

thanks was able to fix 2 logitech g102!

There is no need for soldering if you want another fix you can pry open the black box and you will see the copper spring has flattened. if you bend it back that will fix it for a while until it flattens again.

Can you use the same switch to replace the macro switch ? Cuz my problem is on the macro button

Thank you so much! I just fixed mine with the help of your vid. though, i didn't change the clicker. I did some cleaning and it works! Thank you!

Is this the G102 Prodigy that has the issue? Or is this the newer G102 Lightsync?

after some research, i found that the replacement switch (df2-f, made in japan) is a little bit taller than and has lower actuation force than the original switch (df2c-f7n, made in china)

@orpheuslumen6338

4 жыл бұрын

so do i have to replace both switches?

@Bennedict929

4 жыл бұрын

@@orpheuslumen6338 no, it's just not recommended, unless you can shave off some of the plastic on the switch to make it a bit shorter

Thank you for the vid! Got an issue with double clicking on my G Pro recently. The mice look very similar. Would the same kind of switch work for a G Pro? It sounds like a giant waste of money buying a new mouse when all you have to do is change a tiny part.

@yogamulyono7707

4 жыл бұрын

I think all mouse have same switch, especially with branded mouse like logitech, razer etc... I suggest you better disassemble your mouse first, then buy the new switch you want, or you can go on reddit to check maybe some people shared they experience of changing mouse switches...

@netherquark

3 жыл бұрын

@@yogamulyono7707 "all mouse have same switch" wtf no

@netherquark

3 жыл бұрын

yeah g pro and g102 are quite similar you could get away with using the omron japan switches but I would recommend scouring the internet a bit if you're concerned a lot about the feel etc

@XxGiaruOrihideroxX

3 жыл бұрын

@@netherquark I've already got it done a few months ago but thanks c:

Good vid, but on my G102 the middle click (wheel click) stopped working. This is the most common failure on most of my mice since I heavily use the middle mouse button. I can't figure out what type of switch the G102 uses for its middle click though. It's sadly a different switch than the L/R and side button switches.

@ElectroBytezLV

4 жыл бұрын

How long did it last?

Awesome video man , how the new switches holding up?

Can I use a D2F-01F-T switch for the side buttons?

what's the difference between (D2F-01F) and the one you fitted in your mouse ( D2F- 01F- T) ?

@gelomontesino

Жыл бұрын

numbers and letters

g102 left switch and the right switch are the same?

could you tell me which one is the best on the site please ? the one that can live the longest

What size screwdriver is that ?

I read this could be something to do with static and just blowing air under the slit below the button should help.. It worked for me and i haven't had a double click issue for days

@avinashgurumurthy8756

4 жыл бұрын

@@mattvzs8640 If you're asking how it worked I have no idea but if you're asking how to blow air into it I just did with my mouth

@profhahung

4 жыл бұрын

​@@avinashgurumurthy8756 It works for me as well, but double click issue comes back after about 1 hour...

@avinashgurumurthy8756

3 жыл бұрын

@@profhahung I get it again sometimes too but after repeating the process it goes again.. seems like a temporary fix

i already replace it once, but when i want to replace it again. the switch didn't work? am i soldering it wrong? or it can only be replaced once?

what if I replace its side switches with the left and right click?

@jonathanpushnur99

3 жыл бұрын

well those are Kailh switches which are like rated very low lifetime

I used 1 drop of contact cleaner. Hope this help

thanks man, i used this guide to fix my g102 and it only cost me a $1 to have a almost bnew mouse again.

What model did you use?

Nice guide bro. I am planning to replace my G102 clickers too since it is already double clicking. Gonna use Huano Blue Shells instead of Omrons.

@AmielGesta

5 жыл бұрын

mas okay ba ung huano blue? nakakita ako sa lazada 300 php e. balak ko palitan sa g102 ko

@XKore44

5 жыл бұрын

@@AmielGesta mas stiffer at mas tactile sir. Higher rating din 20m clicks. Usually ginagamit sya sa mga zowie. For fps games mas ok siya, less prone sa misfire. But ofc, personal preference pa rin.

@Spiderman-yf2gf

5 жыл бұрын

when did u start facing this problem??at the start or after some months??

@XKore44

5 жыл бұрын

@@Spiderman-yf2gf bought the mouse December 2018 failed last April 2019. Around 4 months only.

@Spiderman-yf2gf

5 жыл бұрын

@@XKore44 what about grips?? will it be comfortable for claw grip?

Thanks bro, its very helpfull. I was curious with my double click g102, and just found ur video. But i wasnt replace my switch, just clean it up n thats it. My mouse back to normal 😁

@anushibinj

3 жыл бұрын

OMG I just read your comment and was like "hold up...". And then blew into my mouse and the double click issue is gone now! What kind of black magic is this? 🤯

just blow the left mouse click it worked for me

@davekaran148

5 жыл бұрын

yes it does work, but my guess is it will require cleaning in the future at the contact points. I have been doing this for almost 4 months now and it is not a permanent solution. Disassembly and cleaning will fix the issue for those who don't require a switch change.

nice fix. btw what camera did you use in recording?

@Tox666

4 жыл бұрын

Galaxy S7

simply breathe into the gap of left mouse button, it will fix the double click problem. dont forget to like the comment if it worked.

is the switch the same for the right one?

*Opening this video with double click

@danpresko6944

3 жыл бұрын

haha same 2021

god the built quality is so bad. i got this issue and got it replaced in warranty and the next one got the same issue >:(

@ariff2277

3 жыл бұрын

epic

Is it possible to replace the left click button's switch with the same mouse's mouse button 5 switch? I don't use mouse button 5 too much

Can u tell me which which i can use for my g402

I have Logitech G102, served me well for two years (except that the scroll wheel rubber disintegrated and got sticky, so I removed it completely), but now it double clicks. I used to solder the switches myself from donor mice, but I'm now lazy :D Also, it's not that easy to get true Omron switches with lots of fakes around.

Do you really need Desoldering pump for this? because my friends keep telling me that i should buy desoldering pump to really clean the solder lead on the pcb

@charliemongi7298

4 жыл бұрын

When I first started soldering my mouse switches I use the desoldering wick cleans the residue but kind of expensive since it is not usable. So I tried using the pump it is hard to use at first but I got used to it. Watch this video for desoldering techniques: kzread.info/dash/bejne/dKZ1rNKzabDKnZc.html

@Siwiwied

3 жыл бұрын

Even desoldering pump is not the easiest method, but it succeeded well for me. Believe me i'm using it since late 80s (now you know how old i am). 😀

Which model is it prodigy or lightsync??

blowing into the mouse fixed the issue for me. The issue was build up of static electricity.

what type of screwdriver did you use?

@akashteotia1363

2 жыл бұрын

Ull need a flat head ( -) or cross slot/phillips (+) screwdriver with 1.5mm diameter. You can search for "precision screwdrivers" or "mobile repair/opening screwdrivers".

after opening 1000 screws and removing multiple boards this guy : ALL YOU HAVE TO DO IS CHANGE THE SWITCH me : bruh -_-

D2FC-F-K compatible with g102?

hello! do i need to soulder the clicker??

Bruh those stickers on my mouse are so cheap. I tried to remove it but only the upper shiny layer got peeled off. I'm so triggered...

@clipthat2327

3 жыл бұрын

same lol

@wlsn5824

3 жыл бұрын

just try it, and it happen to me too

What keyboard are you using

where can we but that switch?

Sir kindly tell that which click button part used in video. i wanna know the part name. thanks

@needtime2728

4 жыл бұрын

Omron switch

bro were to get that switch and what is the technical term for that switch

are those omron switches?

I replace mine with kailh switch that I got from old logitech office mouse, its really soft and quiet because I heard that kailh switch from old logitech mouse are a very good replacement, its very cheap and I use it for a year and still stronger

I just put some oil on it's clickers and it works like a charm...

Thanks I sucessfully repaired mine

Can u help me plz, I'm having a sensor issue regarding the same mouse g102 the issue is that I feel like my dpi gets lower whenever I play the game and it comes back to normal whenever I'm on the desktop

@nandaa701

4 жыл бұрын

it's prob the problem in your game, check your sensitivity setting.

i got an idea Im gonna switch the side button for the main one rarely using the side button anyway

why cant i remove the pcb even tho all the screws are gone

Does the right click double clicm as well? And can yu rechange thw switch?

@Tox666

5 жыл бұрын

Yeah If you have problem like me it's double click you can change the omron with the new one

can i use switch of logitech g90?

про флюсосодержащий припой автор не слышал . не вздумайте так выпаивать и впаивать микрики . или оторвете контакты на плате или перегреете элементы . купите сметаноподобный флюс/жир и наносите его и при выпаивании и впаивании .

@Fodragon

3 жыл бұрын

Ничего не понял, но спасибо наверное

I didn't have to replace the buttons lol I just opened it and see some burnt metallic parts (could be water or moisture) and decided to just spray some WD-40 on it and leave it for a good while and now it works again, though this isn't a complete repair so expect it to break down after a while.

@Gergo049

3 жыл бұрын

Doesn't WD-40 degrade plastic?

@keitjan

3 жыл бұрын

@@Gergo049 yeah but not all kinds of plastic my G102 has been working fine for like 3 months now, and still no problem or plastic degradation whatsoever

Video dekhne ke baad laga apne bas ki baat nahi fir jab mouse use kiya apne aap thik ho gya

Love it

@Tox666

5 жыл бұрын

Thanks mate!!!

this isnt really much of a help to me, I cant order a new mouse because of Quarantine and dont even have the tools to do this.

Kindly tell us the size of screwdriver

Sorry i tried to like the video but because of double clicking i couldn't!!!.............XD

I don't like loud music in how to fix it videos

Well, just opening that click box and reattaching that thin film should have fixed the double clicking.............

are you required to solder them back?

@Tox666

5 жыл бұрын

Yessss

ph0 screwdriver?

D2F-01F-T or D2F-01F?

Mid button?

This mouse is so cheap and worth it, i would just buy another instead of trying to fix it.

@drdisresfaketaxi2898

3 жыл бұрын

nah, this mouse costs $15 in my country and a pair of clickers only cost less than a dollar. so i'd rather change the clicker instead of buying another.

@drdisresfaketaxi2898

3 жыл бұрын

@bruce banner yep, i just re stick it. It will only take about 3 days to smoothen up it's surface.

@tanyopeev147

3 жыл бұрын

@bruce banner They are $1.80 for two sets on aliexpress.

is there alternative without soldering the switch back to pcb? cause I don't have the tools :'(

@akshaytayade8215

4 жыл бұрын

i dont think so soldering is must for proper contact with the PCB my G102 died a week ago :(

@elmo4672

4 жыл бұрын

@@akshaytayade8215 Ah Did you manage to fix your G102? I've been facing double click issues too but i'm stuck at my home so i can't buy a new mouse neither do i have a soldering kit at home to fix it :(

mine doesn't have screws!

can we change it without soldering?

@mir0es

3 жыл бұрын

I think you need to solder for unplug the switches.

how can i get these double clicks

Can't you claim warranty

Wait, so this mouse can double click when you Buy it?

@zentii5883

3 жыл бұрын

depends on condition

@thesweatylemon6161

3 жыл бұрын

@@zentii5883 What does that mean? Like if I Buy it brand new 1st gen

@ihfazhassan1548

3 жыл бұрын

@@thesweatylemon6161 no after 6months or a year depends on usage

Thanks brother 🤟 👍

Too much hassle. Just open the switch remove the copper inside and clean it using eraser and carefully put it back. This will sove the double clicking issue.

What model is the new Omron from Japan?

@theWanderer521

5 жыл бұрын

3:39 D2F-01F-T

i came here just to double click cuz i want to be good at pvp in minecraft. me after seing this video: what am i watching right now. no but legit how you get double click pls teach me. i want it