No video
How to fix curving bbs Airsoft barrel hack for better grouping & accuracy.
Hope this helps anyone having accuracy issues. Or swerving bbs I have tested so many different barrels hop up chambers, buckings , gear box shells and other things to get improved accuracy with bbs. This hack actually makes the best improvement for the littlest amount of work and $. Good
Пікірлер: 48
Such a simple but effective idea
I was wondering how to fix that 😂
I run a super thick oring around the barrel in my hicapa, right against the hopup unit. The squish when the outer goes on is a sure sign, and the long range accuracy is halved or better on both x,y axis
Really helpful, thank you
My mind is blown... ive always wondered how to fix this😅
Keep it up with the tips. Mind blown ideas
@JJMoore
5 ай бұрын
Thanks my friend
I need to do this to my pulsar setup, cause damn that double eagle outer barrel ain’t that good
If you’re going to use tape you have to do it in a spiral down the entire barrel then it works but if you just wrap tape in the same spot then no.
I wrap teflon tape around it, its less permanent and can be adjusted to your needs
Yep u forgot to mentioned not all the outer barrel can accept that tricks because I did that many years ago and using a one piece outer barrel and it’s stop in the middle of the outer barrel because there’s a little ring that held inside of the outer barrel so to do this tricks like u use and shows there is not the one piece outer barrel is extension outer barrel that has a smooth OD and no ring piece that held the inner barrel and also some of aeg and gbb outer barrel have engrave in the end on the outer barrel to install a rubber o ring and that’s why the most companies make those ring piece in the middle of the outer barrel and that’s their mistakes and take note not all outer barrel are the same OD size because nowadays aeg and ggb outer barrel have improved there OD size to make the inner barrel nice and snug but yea good saves there 🤘🏻
Thats a great tip
Good stuff 👍
Acetech inner barrel stabilizer.
That’s actually really smart,although I could see that as a slight problem when trying to take it apart? Very interesting though
@JJMoore
10 ай бұрын
I cut them off if I service the barrel or hop up and replace them
Its funny, because with firearms you actually want the barrel to be 100% free-floating, only thing thats mounted/has contact is the chamber, and with airsoft its the complete opposite. I think its the same thing with airsoft, but because the inner barrel is not a beefy steel barrel that cant move at all it ofc moves alot, but I think the right way to do it might be to only stabilize/center it at the end of the muzzle and at the hop up, maybe this is better than tape etc all the way aruond the barrel, just a thought, nice content 😃
@JJMoore
10 ай бұрын
Very true, I’m having some barrel stabilizers made that are removable now hopefully I will have a prototype this week. 😁 thanks for your thoughts I love hearing feedback.
@nickthedane1
10 ай бұрын
@@JJMoore nice keep at it 😁🤙
🤯👍
JJ what are your thoughts on the amped airsoft HPA package?
@JJMoore
10 ай бұрын
I buy all my hpa lines and regs from amped I love amped products
hey jj, i understand you have worked with kwas eve series, what do you think the best cylinder head for the stock tappet plate is?
@JJMoore
10 ай бұрын
I use the rocket cylinder head on them
@sxmzy6431
10 ай бұрын
@@JJMooreis there any fps loss or gain, just need to replace mine lol
@sxmzy6431
10 ай бұрын
i also see a lot of lonex cylinder heads, have you used any of them?
@JJMoore
10 ай бұрын
@sxmzy6431 I don’t like to use lonex cylinder heads I use the lonex piston heads a lot but the cylinder heads are so hard to get in the cylinders
@sxmzy6431
10 ай бұрын
@JJMoore do the rocket heads have any compression issues with the proprietary kwa eve tappet plate and nozzle?
What size heat shrink is that?
When will you guys be doing the giveaway I have all notis on I’m just a busy kid and afraid I’ll miss it
@JJMoore
10 ай бұрын
Few more hundred subscribers it will be soon as we hit 20k Mabey a week or so. If I had to guess
@6.strinGs
10 ай бұрын
@@JJMoore ok Ty
What i do is double up on the spring tensioner my doesnt move at all
You think you could use tape if you wrap it enough
great idea with the heat shrink! but his will just make it more consistent, "curving" bb's come from off center over hop, no?
@JJMoore
10 ай бұрын
This is used for fine tuning and after you have it aligned and want it even better. Tighten up that pattern.
@tipzy7730
10 ай бұрын
prtty much what i said... except for answering the question. thanks tho!
👍
how do you tighten the heatshrink around the inner barrel?
@connerjones9676
9 ай бұрын
You can use a hairdryer or a heat gun
What size heat shrink is this? I never could quite get the size right
@JJMoore
10 ай бұрын
I will get you the size when I get back in the shop
@ilan072
10 ай бұрын
@@JJMoorethanks JJ!
@franciscojavieramezcuafern1209
4 ай бұрын
@@JJMooresize? Thanks !
also, oring can do the job
👍👍😎