No video
HOW TO fix audio output issue between DJ controller and Serato DJ Lite
Quick guide on how to fix audio output issues between your DJ controller and Serato DJ Lite.
I’m only uploading because I couldn’t find this fix anywhere else online and I’m sure it’s the solution to some people’s audio problems.
2024 EDIT: I had no idea this video would get so many views. I'm glad it's helped so many people, but it hasn't for everyone - I pinned a fantastic comment from a viewer explaining why this problem occurred and a solution. Check it out!
Пікірлер: 73
By default, Serato uses your deck as an audio card so it was routing audio through your dj-202 - so it was trying to play through the rca master outputs (top left). To fix - or use your computer's audio output (it's speakers or to use the headphone jack on your computer) go to audio settings and change the output to what is being used by your computer (often realtek but could be something else; hover over your audio icon in the task bar to check what your computers default audio setting is then in Serato, make sure you use the same)
@testifybeatz
Ай бұрын
i’ve done all this nothing is working. absolutely no noise.
@runnerkidal
Ай бұрын
@@testifybeatz its super finicky when you don’t use the default deck audio card … takes a lot of playing with. Did you resolve? (It’s been three years)
@testifybeatz
Ай бұрын
@@runnerkidal nope didn’t resolve. sent it back in the end
You are a blessing on this earth. I've been searching for hours trying to figure out why the hell my TR-S Kit sounds weren't playing through my headphones and now I know! Thank you SO much.
Just solved my problem after almost 2 hours of struggle...thank you!
OMG Thank you so much dude! I spent half a day trying to figure this out... and then I found your video. Seriously Thank you for this video!
3 years later still a life saver :)
Worked for me! Thank you for the fix mate. Lifesaver!
Perfect video - it worked and was the solution to get my audio out via HDMI as well. Cheers!
thank you. it worked. bud sold me the mixtrack pro numark for 10$! im learning to make music, not dj, but this will be good to learn
I was about to start my set and couldn’t get it to work . Had a horrible night using turn tables I’ve never used before and I’m a beginner smh lol let me try this😊
Has anyone found how to fix this on the newer version of windows???
@samueltapia5010
2 ай бұрын
Did you figure it out
Good job mate... was searching for hours tryna get an answer
Thank You very much! Saved me so much time and struggle!
Hey everyone, I just fixed the issue I was still having problems also. Just go in serato then in the audio tab check use laptop speakers
That has to be the most roundabout way to do it. Mixxx has done it right, and it's free. Why can't Serato learn?
Thanks I will try that. I think that will work.
How about on a Mac?
@natalieeab
Жыл бұрын
did you figure this out?
@bazukamimi5721
Жыл бұрын
@@natalieeab Yes I did
@natalieeab
Жыл бұрын
@@bazukamimi5721 what was the trick?? having the same problem and cannot figure it out
@bazukamimi5721
Жыл бұрын
@@natalieeab If you are using Serato DJ software, it will play through the laptop jack. Go to preferences, then select audio, then under Audio Output tab, select Use laptop speakers. Let me know if it works.
@llClassifiedll
2 ай бұрын
@@bazukamimi5721i did that. Its still not working
thanks you really helped me !
THANK YOU SO MUCH. I JUST BOUGHT THIS DJ 202
You’re a life saver ❤🎉
You are the MAN! Thank You So Much! Got me up and running! This Means a lot! p34ce!
M8888 ur a diamond 💎, I got the same Roland and everytime I plugged the console into the laptop the sound would automatically cut off? Bro’this has to be the reason, I’m not getting sound n went back to my NDX500’s but know I can get them out later and hopefully u just solved, wat I’ve been too busy to look up Barr toda, m8 ur the 2nd guy that’s said the same thing, but u got same equipment rather than the lappy mines is windows 10 got some Mojave op or Catalina op no sure I thought it was w that but will try later thanks man....🎼🎊
You are a ✨god✨
My headphones and speakers have earrape audio, what's the problem?
Yeppp, that fixed it, cheers m8 ❤️
Thanks it's working
this is not the way its supposed to be tho. its supposed to work without having to listen through the device, using this works as a temporary fix but causes massive delay between the headphone cue and speaker output making it virtually impossible to beatmatch by ear as the latency causes so much delay
@djmadnez
2 жыл бұрын
Absolutely correct....99% not for laptop speaker use.
bro youre a god
Thanks man I got no sound from rev1 to laptop tryed setting sound and serato setting use laptop speakers any advice thanks
@littlefishbigfishclothing8826
3 ай бұрын
Updating the soundcard drivers might work. Do any viewers have any ideas to help?
Yup, still nothing.
I have the Roland 505 and having the same issues but everything will pill through virtual DJ no problem but serato a problem also the mic won’t work
Where do you get that playback devices tab on the computer? You didn't show that
@littlefishbigfishclothing8826
3 ай бұрын
From memory right click the sound icon in bottom right corner and there should be an option my bro
how do you do it for win 10? i have the same problem
@littlefishbigfishclothing8826
4 жыл бұрын
Unsure of Win10 UI, might have to search Sound Devices in the search bar or Google where to find it on Win10, sorry bud.
tysm bro
I have tried an alternate way. Repairing Serato DJ Lite. That's it.
Still cannot get it.. im fed up… lol… bye!
you are such a fkn legend mate l
yo bro, thx a lot
Does anyone know how to fix this issue with the Numark Party Mix 2??
Where is it? Can’t find it.. where can i find that playback audio? Is that under system preferences? I watched the video 5 times, following where the cursor points. But still couldn’t get it.. help please.. sorry i’m slow.. 🤦🏽
Do I need to have a speaker for it to work
@littlefishbigfishclothing8826
4 жыл бұрын
Or headphones, just switch output audio to headphone jack if you don't have working speakers.
Do you have the same fix for a MacBook Pro?
@littlefishbigfishclothing8826
4 жыл бұрын
Sorry, I didn't realise so many people had viewed this since I uploaded! I've never used a Mac but I would assume the sound/recording devices can be accessed through the system preferences: support.apple.com/en-au/guide/mac-help/mchlp2256/mac Let us know if it works or if you found another solution for Mac users. Cheers mate!
@musicalfreestyles
4 жыл бұрын
Thanks. It turned out my initial controller had bum RCA outputs. Used a different make controller and had no problems.
Saved my mixer from going out the window
Do you know how to adjust the volume in serato ?
I just bought mine im having no sound lost dont know what to do
Recording voices? Where can I find it?
10/10
Thank god
Благодарю братан
Anyone got same issue but on mac?
Not working, can’t hear iut of headphones
I tried doing this but I only got static. Help pls
@littlefishbigfishclothing8826
4 жыл бұрын
I'm no expert, I literally discovered this fix by luck but I can try to help. Do you get a static sound when using the speakers through another application (video player, etc)? Do you have any other recording devices plugged in to your computer?
what to do if you're not getting levels in the device settings while music is playing in serato loll
Anyone know how to fix this in windows 11??
@cellistozan
5 ай бұрын
Hey! What did you do. I'm having the same problem
@Rekitz954
2 ай бұрын
i’m serato go to settings, audio then check use laptop speakers
MvP.!!