THAT is a useful video! I appreciate how in 1 minute 27 seconds you clearly explain exactly how to orient yourself to the ironing board, what does what and how to fix it. We've been sitting with the ironing board stuck open for days and I was on the verge of throwing it away. In less time than it took my wife to dust the living room, I looked this up, had it fixed and put away. Thanks for taking the time!

Thanks for your clear explanation and demonstration. Out of 4 videos I've just tried on the same topic, yours is the best by far. Your solution worked right away!

Words simply cannot explain the brilliance of this video. Brevity is the soul of wit.

Thank You! I counted myself an idiot for a month because the handle fell out and I could not get my ironing board to collapse again. I knew that little metal piece was the key, but in my case I had to whack it with a screwdriver and hammer to make it release. Once I did, I was able to get that diabolical little metal handle back in and now I can put it in a garage sale!! 🙂

Thank you! Was driving me crazy how to put the handle back in place.

I just fixed mine, however, my lever is attached to the ironing board so it can never come out. The lever had somehow slipped from under one of the little flaps that covered the lever. I also discovered gobs of dirt and semi rust. I cleaned that off and added some 3 in one Household oil to the metal rod that the legs slide up and down on. I also added it to the release tab and lever its self. Who knew! Ironing board is over 20 years old. Thanks to you I can keep using it for another 20. LOL.

Fantastic! This is still helping people seven years later!

thank you!! very good video finally fixed mine after it sat open for 6 months in the basement!

Haha! You Da Man! It's funny how something sooooo simple can become the most complicated task without the proper instruction.

Thank you for this video! I watched a couple of other ones first and yours explained how to fix it clearly and quickly! Much appreciated!

Very helpful. I found that I needed to bend the tabs of sheetmetal to get the latch to stay in place securely.

Thank you. This worked and your direction was much clearer than the other videos I looked at.

@barbaramartin3680

5 жыл бұрын

me too. can someone come out and fix it?

Awesome video. You saved our ironing board.

Thank you so much for this, I thought I was gonna have to buy my roomie a new ironing board! 🙌

Excellent video! I followed your explanations & demonstrations and it worked! Thanks!

Truly what did people do without KZread to fix this stuff

wow! I never thought I would find a video to help me solve this problem today. Thank you so much for posting this

Thank you! This was most helpful. The ironing board is now closed. I now understand that our ironing board failed b/c the metal mesh at the top of the board had snapped and the mechanism will no longer stay put.

You've done it. You solved the puzzle. And, thanks to you I've saved time and money. Awesome.

His explanation was simple and to the point. Thanks!

Thank you! It took me a couple of tries but finally got it. And to think I was going to throw it away 🤦🏻‍♀️

Perfect explanation - exactly what I needed

Short and sweet and it worked! Thanks man!!

Perfect explanation. Easy to follow. Thanks!

Thanks. I was about to throw mine to the garbage and buy a new one. This saved me the time and the money. Thanks for being short and to the point with just the info that we needed.

Thank you! This was my third video and the only one that worked and it only took 10 seconds! Thank you !!!!!

@rmannava

6 жыл бұрын

Centrifugal Muse glad it helped!

Amazing that I found a video about it!!!! you're a genius!!!!!

Thank you so much for this video..I was struggling with it. It was short but straight to the point video

This was the best help video about how to re install the handle. Thanks a lot man

@rmannava

7 жыл бұрын

Glad you enjoyed it! Every time it happens it takes me half an hour to figure out the puzzle so this time I made a video to reference.

Thank you so much! So easy and so logical once it is explained properly.

Yours was the ONLY video that explained it to where I good get it: thank you!

Tks a lot for this video! it is well explained and still useful! Great job!

This is very helpful! Thank you :) please make more videos like this in the future!

The best, easy to follow explanation

Very well presented! It worked for me. Thank you Sir.

Thanks for that. I wasn't sure how likely it was to find a video with the exact same board.

Perfect!!! Thanks You very much, from México

Thanks for to the point and absolutely precise solution to this Ironing board issue. Similar results for the solution on KZread rendered results which were more or less vague compared to this.

video is still relevant in 2024...big ups man

Thanks for the help!

Thank you for this!! This has never happened to me, and I thought for sure that was the end of the ironing board. But now it's all good! Yay!

You are the man. I was about 3 seconds away from taking a hammer to mine and ordering another on Amazon

This video had now help me twice. Lol. Thanks!

Thanks for making this video!

Outstanding....Thanks......Plain and simple.

Dude, saved my life, thanks!!!

Thanks so much!!!! Really helped me out a lot!❤❤

Thanks so much for your video. Trying to figure out how to get the handle back in was driving me crazy.

Simple and to the point! Thanx!!

Awesome!! Perfectly solve my problem. ^_^ Thank you so much, rmannava!

Very helpful, thank you!

Thank you, Sir! That did the trick!

very clear explanation the best of all video thanks

Thank you. If others pointed out the fact that the lever that releases the rod needs to be pushed back (against the spring) for this to fold, it would haven been a lot easier for me to understand how this mechanism works. Instead, they say that this needs to be pushed "up", which is incorrect.

Thanks for the help

Bro, you saved me. Thank u

thanks, great explanation.

Thank you mister!!!

Dude, saved my life

Thank you very much.It is very helpful.Thank for up load this video

Thanks boss! Helped me make my wife happy. :-D

Thanks, I appreciate it!

Excellent video

Saves me buying a new one!

Thank you sir!

Thank you! This is perfect

thanks so much for making this

Very nice, thank you!

Awesome! Thanks!

Thank you!

My hero!

Great video thanks

Thanks so much!

Thank you.

Estábamos en un duelo a muerte a punto de destruirlo. Gracias por este video ❤

Thanks!

Thank you! I was fighting with this thing for over an hour. Took me less than a minute after seeing this!! 🙌🏼👏🏼👏🏼

thank you so much

Thank you

Thank you :)

Hello can you please make a video about Mabel Home ironing board. I just bought very new last week and the lever came off

OMG, thank you so much! 🤭

Now my mom won’t kill me 😅😅 Thanks!!!

Wish I saw this BEFORE I tried fixing it myself. I think I did irreparable damage to the handle and or the board.

thankx 👌🏼

Thanks. 👍👍👍👍👍👍🔥

Wizardry!! Thank you.

Thanks

You are awesome

What if you push the iron board and it doesn’t pop out?

Good Job

THANKSSS!!!

Thanks for sharing! Now I don't need to go buy a new one.

thanks

ty

The discription you provide is great but I guess mine is jam. I'm seconds away from bringing down the hammer on it. I have the same iron board like you and me pushing the metal piece is not happening. Any suggestions is greatly appreciated.

@rmannava

7 жыл бұрын

These boards are terrible. They can get stuck. May have to use a tool like a wrench or screwdriver to loosen it up

@joycelubin7844

7 жыл бұрын

rmannava thank you for replying back. what would I be loosening up? there is nothing to screw loose. I was checking out that metal piece and it looks like there is no room to push back. that was what you said to do right?

@rmannava

7 жыл бұрын

Joyce Lubin I think you have to push the top of the plate forward towards the nose of the board. If it's really stuck you might try a drop of oil or two along where the plate contacts the other parts.

@joycelubin7844

7 жыл бұрын

I'll try that. Thank you so much

+rmannava thanks for taking the time to share.... made it a quick fix.. I used a piece of duct tape to hold the handle once I saw where it suppose to live LOL God Bless : )

Y O U A R E T H E M A N ! !

Thanks✌️✌️🙌🙌🙌🙌🙌

Just take the cover out and you can access everything