Hope you enjoy the video people!

Just a little tip .water at bottom of hole , half bag of post Crete , mix a bit , then add other half of post Crete add water to top and give a bit more of a mix to postcrete .it helps to ensure all of post Crete is dampened.

@johnsaunders8021

2 жыл бұрын

God tip but also I wouldn't keep moving the post with all the post mix around it I would get it level first then add more of the post mix

@Badge1122

2 жыл бұрын

You cannot keep the Crete from harding.

You have done a good job of that, I used to be a fencer and bricklayer, I used to use primed angle iron to concrete in the ground with holes in it to screw it to the post, found it less intrusive and you hardly notice it.

I don't know about being under 10 minutes, but I like the content.

@marknolan2092

4 ай бұрын

😅it would have been just at easy to replace the post. And would look much nicer.

Thanks, very informative for someone who had no idea how to fix broken fence or items needed!! Great

Nicely done. When the laurel hedge grows in you will not see the repair. Lovely.

Great video looking forward to seeing your other stuff, I’m sure it will come in handy this year!

I am useless....but watching just this video has given me the confidence to tackle this exact same job on my fence thanks for this!

Thank you this was a huge help! I've ordered the following so I can repair my fence: Concrete Repair Spurs, postcrete, Round Washers M10x50mm and Coach Screws - M10 x 150mm.

Excellent cheap fix….thank you !

Really helpful thank you - fixed our post yesterday afternoon!

Thanks for sharing, I've been doing this to our fencing, falling posts, for a couple of years now! So much easier and, hopefully, permanent. I do just use my cordless drill/ driver for the coachbolts and finish by spanner.. The post supplier recommended M10 bolts but M12 fit and so I use those for a bit more strength. Just wish you were local to me to do the job for me! Local fencing companies/ gardeners aren't interested in this fix!

Awesome!… Thanks, from Ajax,Ontario, Canada!

Brilliant to watch and really well described process. Thanks

@cutcrewltd

2 жыл бұрын

Thank you!

Very helpful. Thanks

Postcrete is absolute magic stuff!! Had to do a fair bit of fence replacement a little while back (panels and posts utterly beyond hope) and decided to try a cheap petrol powered auger. It was surprisingly not rubbish for the price.

Great Video, the only thing I am unsure of is - How would you dig a hole through the existing post Crete that is already surrounding the broken post?

Easy to watch and learn - nothing complicated. Feel after watching......even I could attempt a fence repair. 😅 Well edited and straight to the point. Really good and 👍 great advice.

@cutcrewltd

2 жыл бұрын

Thank you!! And I’m so glad you gave it a go!

You made it look so easy 👍

Thanks Jack my mums fence is quite big and old and needs replacing but I like your technique so cheers

Great stuff! 👍 I’ve got this to do on my fence soon and now I feel a lot more able to have a go myself. Thank you. I just subscribed. I bought one of those diy metal garden tool shed kits and it needs to sit on a level base. Could I put four short concrete posts into the ground at each shed corner and then put a timber frame on top to form my base? What would the right posts or spikes and brackets be called please. Any tips gratefully received! 😁

Simple, thanks.

Now I know your in MK I’d have got you to do my broken fence. Great vid cheers

Thanks. Very straight forward and clear step by step guide.

@cutcrewltd

2 жыл бұрын

Thank you!

@geoffm9944

2 жыл бұрын

@@cutcrewltd One of my fence panels fell down last week because one of the adjacent seven foot posts completely worked it’s way loose (caused by the recent storms) and is now leaning over. I think the main culprit was a very short concrete spur, installed by the fencing contractor a few years ago. I’ve now bought a four foot spur. He also put the posts ten feet apart, which in my estimation was too wide, after having read on line that fencing posts should be six to eight feet apart. Thanks again.

Thanks for taking the time to make the video, some of us DIY people appreciate these videos that need a cheap fix and have a small budget, as I note the negative comment crew are not quick to post videos themselves. Thanks

As a landscape gardener of 22 years now,I like your enthusiasm.. Good video. Good content. 👍

Great video, very useful tips. Good luck with your business.

Well done. Job make it look easy thanks

Thanks great idea.

Hey, thanks for that. Good one.

Great help, thanks. Please keep up the guides. Hope you expand to cover my area!

@cutcrewltd

Жыл бұрын

Thanks Peter!

Well done Jack very informative have liked and subscribed.

Thanks Jack

Hi Jack laid a lawn last year and followed your tips and took really well but gave its first cut of the year and wear turf was thick its left it yellow patch I have fed it and you can see green on bottom of yellow grass is there any advise pls mate

Hey Jack Thanks for the informative video. You just saved me time and money so I appreciate The wind snaps at least one my post each season … any advice?

Good job

Glad you’re back... I’m planning on overseeing my lawn as it’s patchy from my son and dog running about on it last year leading up to christmas and then also playing on it when we had snow etc... I need tips

@cutcrewltd

3 жыл бұрын

Can’t go wrong with my tips on how to fix a patchy lawn!

Brilliant

Those spurs are too cool, never seen them here in the states. I wonder if they even sell them 🤔Great job 👍

@cutcrewltd

Жыл бұрын

Well that sounds like a business opportunity!

would love to see a video on fixing a sunken garden paving slab

"That's nicely mixed now, getting there". What a bodge.

@alpachino468

4 ай бұрын

This video helped me plan how to repair my fence post. If I had not seen this, I probably would have paid thousands to get a new fence put in because I didn't know any better. Get a life Gary, and maybe you'll learn to relax a little...

Nice one mate 👍

Nice informative video. If you come across a job to do a fence on top of a brick wall or attaching fence posts to brick wall that would be lovely. Best wishes!

and on to the next one

Everyone has their own opinion on how to do things, and no one is perfect! Done many of these over many years, and never had a complaint, must be doing it right then i guess!

Good video, need to do this job myself and this has been a great help 👍

@cutcrewltd

Жыл бұрын

Good luck Ian!

@ianashton1593

Жыл бұрын

@@cutcrewltd Thanks, biggest worry is digging the hole as the wooden post has already been replaced twice in the last 4 years. The area is subject to high wind and I need a stronger, more permanent solution. Thanks again for the video 👍

I've just watched a similar repair on YT , where long steel flat rods were buried in concrete and screwed, on front and side of post, same effect, a bit quicker, and less visible.

Just another little tip mate, a post is plumb not level, keep up the good work

Great job well done Personally I pretty much fill the hole with water once the post is level then pour the postcrete in. Usually it still needs a top up after as water drains away a bit Oh and washers ..I've seen hex heads pulled through the holes so always use a stainless washer. That's not knocking you fella...more an observation and what I've picked up over thirty yrs of doing this.

Hi how much would your fee ( labour + materials) be for repairing my fence at South Croydon in a similar manner?

Top tip

This method works well for mending posts. However, from my experience, 1/3 of the entire length of the post will be buried in concrete underground. Mine was surrounded by about 180kg of concrete. Furthermore, the post will be leaning because it has snapped at ground level (due to various reasons.) This makes the bugger almost impossible to mend this close to the ground in this way. Or, maybe whoever did our fence row simply liked pouring concrete but didn't add rainwater or runoff into consideration.

Well if you can fix that in ten minutes, you can do my posts! I found it takes about 2 hours total of fix a post, I dig down 2 and a half feet minimum breaking up the old concrete as I go, secure the concrete spur to the post, square up and concrete in the spur. That tool you had for making the hole is ok if you can get access to turn it perhaps by leaning the old post over. I have a 6 foot 6 inch high close boarded fence and so far have repaired about ten of the posts by installing concrete spurs. Some of these were adjacent to a concrete path and the only way to do those is to use a long chisel on a hammer drill. I'm not as young as you are but this example if fine if your faced with a shallow depth, short fence post and soft concrete. Corner posts are a different story where access is restricted and also old concrete with lumps of flint and other rubbish is not so easy.

@saulwest8254

2 жыл бұрын

Absolutely, the time it takes varies on a few things. Soil type, amount of stones/rubble in the ground and if you have the right tools. It took me ages to remove old concrete as I did it with a club hammer and 8 inch chisel by hand. Next time I'll hire an electric concrete breaker.

@montyzumazoom1337

2 жыл бұрын

@@saulwest8254 I use an sds hammer drill on which you can stop the spindle rotating to use a chisel. I use a 600mm long chisel mounted in it to break up the concrete. I also use a long handled post spade to help break the concrete.

Good of you to sort it out especially as it is not your fence AND they still chose to show their neighbour the worst side!

@cutcrewltd

2 жыл бұрын

Without good neighbours what is life ?!

Was wondering what your thoughts are on electric scarifiers as my front lawn is 80% moss what’s your tips to turn this around?

@cutcrewltd

3 жыл бұрын

Hi Jack Moss killer, wait two weeks, scarify then seed!

@jackcunningham4127

3 жыл бұрын

@@cutcrewltd cheers will give it a go any brands recommended?

Better to replace the post. Unfortunately there is little or no postcrete behind the concrete support

Was the original wooden fence post not concreted into the ground then, because I cant see how youd make a hole with that auger thing that close to the wooden post if it was concreted in. Surely the original concrete would be at least 150mm plus around the post?

The best way of putting a concrete spur onto a wooden post is to dig down 1.5 ft and place the concrete spur into the hole then bolt it onto the wooden post by using 6" bolts and washers. Then pour water into the hole and add in the post crete mixing as you add. Then using a spirit level, level the spur, add more water if needed mixing well until the post is firmly in place.

@fbigburg

2 жыл бұрын

GK I must have missed your professional video: pls provide your link

Hi pal do i need to pre drill the post to use these coach screws or are they self drilling? Thankyou

@cutcrewltd

Жыл бұрын

They are self drilling, however it does help the wood not to spit

Question: is it ok to lay grass seeds now? and would you recommend a certain brand or do they all do the job🤷

@cutcrewltd

3 жыл бұрын

You should just get away with it, there are hundreds of different species and brands I’d advise getting the right one for the conditions on your lawn !

Thank you. Just suggestion if you could reduce the music volume in background that would be helpful

Great video fella! Spent a lot of my younger years around Northamptonshire! Great channel! I’d like to see an arris rail fence install as I need to do mine. The posts are rotten and need to learn how to do the feather edge. Cheers

@marccarter4469

2 жыл бұрын

matt feather edging is very simple.Make sure the feather boards are vertical and overlap them by an inch onto the previous board and fix them in place with either clipped head or full head nails.( a nail gun is the best tool for this) put up 6 boards and check for plumb. If using 6 inch wide boards cut yourself a block of wood 125mm in length you can then use this as a guide by placing it on the previous board so you don't have to guess or measure the inch overlap.

@mattavalon

2 жыл бұрын

@@marccarter4469 mark! That’s so kind of you to get back to me on this. Cheers for making such useful, simple and straightforward videos. Really helpful. I’ve got 6 posts and 5 arris rail sections (10 ft wide) so I’ve got my work cut out. Have you ever made a video on this process? Thanks again Marc

@marccarter4469

2 жыл бұрын

@@mattavalon I'm a watcher of youtube and don't really post videos but I have a job next week putting up a feather edge fence so will record the fitting of the boards for you

@mattavalon

2 жыл бұрын

@@marccarter4469 that’s brilliant Marc, got confused who posted the video but all good. Cheers again

What an eyesore!

@cutcrewltd

2 жыл бұрын

I’d agree! It’s a good solution for a temporary measure! Plus ours are hidden by hedging

Is your fence bar concrete?

Very useful. My personal preference is not to have background music - it gets in the way of the message.

Jack what attachment to I need for my driver to put the bolts in ?

@cutcrewltd

Жыл бұрын

A socket set :) Most are hex M17 or M18

How did you get the concrete base out? The auger is good for digging the earth but can't cut the concrete. That is always the hard - removing the concrete base.

@cutcrewltd

2 жыл бұрын

I was very lucky that a hammer and chisel worked, failing that an electric breaker!

I was attracted by the under 10 minutes then found out it would easily take me 10 plus hours 😸

Nice guy, but the post seems at an alarming angle?

I see you used an auger to dig hole. However, if the old concrete is jutting out from the edge of the old post hasn't it to be broken out to enable a flush fit for the spur up against the post and to true it? I see you did not show that. An auger won't dig through the old post crete will it? For some diy types that would be the real ball ache in this repair.

The correct description is, coach SCREWS not coach bolts.

@cutcrewltd

Жыл бұрын

Cheers Dave!

Good stuff. Less preamble at the start of videos and sharper editing will help your channel immensely. Keep up the good work and the very best for the future.

@cutcrewltd

2 жыл бұрын

Thanks silver!

Certainly wouldn’t be happy with the length of those coach screws, at 100mm you would have less than an inch into the timber that could easily pull out. I would use M12 150mm with a decent pilot hole then especially with that impact you would get an excellent fixing. As you say it’s a cheap quick fix and the original concrete was certainly spared but I wouldn’t be too concerned as the new postmix should adhere to it and make a larger mass as a whole. I assume the disconnected aris rail at the other end of that fence section was fixed too. Good little video for the DIYer

@jasonwilson7674

2 жыл бұрын

Spot on with those M12 150mm , exactly what I used for mine 👍🏻

Am I the only person to have noticed that the fence was still falling away at the next post?

“Cheap & Fast” let’s see if it will last till winter ❄️ 💯

You missed the bit where you start digging, then have to go hire or buy a breaker because of the mahoosive block of concrete someone poured in the mine-shaft they dug for the original post...

I have done that I usually takes me half an afternoon to dig the hole for the concrete post. Not 10 minutes.

Oh shit he's back

@cutcrewltd

3 жыл бұрын

With a bang!!!

@Alilyal

3 жыл бұрын

@@cutcrewltd instead of the cobra I ended up buying the hayter spirit 41 have you had any experience with this mower? also I'm laying rolawn medallion turf have you had any experience with this turf? If so what's your opinion

@cutcrewltd

3 жыл бұрын

Rolawn is national grown and in my opinion can be hit and miss, might be better off finding a local supplier! Hayter is a great mower! All mowers have little niggles but overall a good choice!

@Alilyal

3 жыл бұрын

@@cutcrewltd thanks man 👍

@wayneforster2423

3 жыл бұрын

Hi Jack laid a new lawn last year followed your tips and its took well but I have cut it for the first time this yeah and wear the turf was thick its left yellow patch but you can see green on bottom of grass shoots any advise pls

Do you need a bag of postcrete per post?

@cutcrewltd

Жыл бұрын

Yes :) I’d order 2 just in case!

Them coach bolts are "Coach Screws" the length of 100 mm is way to short should be more like 150mm(6") in old money and the spur should go down 600mm (2'-0). As the post is broken(rotted off) below ground it's better to remove it and the concrete around it( hard work) then the concrete (postcrete) will get fully around the spur. Apart from that a great job.

The slop on the spur is facing the wrong way😮😮😮

If you don’t hit concrete I’d be worried especially the way new builds are done these days.

@allservepropertymaintenance

2 жыл бұрын

Yeah, we have just done a whole load of these and spent half a day just removing concrete from where the spur was going. Certainly did not take us 10 minutes.

Great video on how NOT to fix a fence probably.

@cutcrewltd

2 жыл бұрын

I’d totally agree, but sometimes people need a cheap temporary solution! There’s many ways to skin a cat

I wish it’d watched your video a week ago

I may be naive, but I’ve never had this issue. A storm cracked off a corner fence post I have. I’m depressed because I had taken down a privacy fence around a hot tub and wanted the posts for backyard lights, a shade sail or pergola top next year. It would have to be the corner post! It has left about 1 - 2’ left on the bottom, but splintered to a point. I claimed it on insurance because there is tree damage, but I suppose it’s a useless idea to be able to fix it. How the heck do you get that cement out? I’m a 4’ 9”, 99 lb single woman. Aahh!

@cutcrewltd

Жыл бұрын

You could hire a breaker from a local tool store, or failing that, pay a “handy man”

@Tinyteacher1111

Жыл бұрын

@@cutcrewltd IF anyone would call me back!!!

Should have removed the bottom of the broken post ..... as it rots it leaves a void ..... then the spur post moves

What if its on concrete mate

You don't need to put water into the concrete. Pour it in dry and make sure there is plenty of it on all 4 sides of the post spur. Shake it until it won't wiggle any more. You don't have to wait to connect it to the old post at that point. What you have shown is going to fail soon, because the amount of concrete on the side of the new post spur isn't enough to hold the spur up. It will crack off and the post will fall over the same way it did. Don't add water, as the concrete will absorb moisture over time from its surroundings and set up.

@cutcrewltd

Жыл бұрын

We shall give that a go! Not sure it would set fast in summer!

@billrobinson198

Жыл бұрын

@@cutcrewltd The whole idea is that it doesn't need to set. The package of post setting concrete, with the small pebbles in it even says that you don't have to put water in it. Says that right on the package. You just wiggle it back and forth until it won't wiggle anymore and it's solid. Much more solid than when it's wet. The cement absorbs moisture from its surroundings over time. Doesn't matter how long it takes. It will eventually harden. It even has a better composition than mixing it wet and water will drain through it more easily and it won't hold water against any wood you might use with it so the wood is less likely to rot out. The concrete manufacturers have known this for years, yet most of the fence "experts" on the internet have no clue about it. Thanks for responding. Enjoy.

What do you do if the post is concreted 3ft in the ground and sourranded by concrete. The fact theres no concrete around the post may be the reason it broke!!

@cutcrewltd

Жыл бұрын

You get the breaker out 🥹

300mm 😳

It would take a lot longer than 10 mins as you need to remove old concrete and as for cheap those posts are not cheap

The hardest part I found was breaking the old concrete which you do not show!

@seanclancy4162

2 жыл бұрын

Agreed...I had to remove a rotten wooden spur and original fence post. Even with a hired medium duty concrete breaker it took the best part of a day to remove the original concrete and get down deep enough to instal a new wooden post and concrete.spur! And I used 2x 20kg bags of postcrete!

@rogermarsh9806

Жыл бұрын

I tried using brick bolster and 1” chisel without success then fitted an old centre punch in the end of a steel bar. I got the punch from a Jeep tool kit at the end of WW2, I might add I’m not in the first flush of youth and don’t have much energy.

Ditch the arbour for post hole diggers

Use fence fix metal fkat bars you drive between the post and concrete about 500 to 600mm down and screw it about 600mm above, they require some bashing in!?!

put some brown paint on that fence spur

Lucky the concrete from the original post wasn't over used...that would have caused a bit of work...other than that very informative 👍

Maybe a description of all the tools and parts used in your summary would be great rather than having to go through the video to see what you used.

eerrmmm looks like you could do with a new bubble in your spirit level thanks anyway

Sorry to be a bit a prat but level is for the horizontal and plumb is for a vertical and you were plumbing the post , good video though, I was a brickie for 40yrs

Easier to put a repair stake in damaged post and cheaper u know meta post spike