Yes! "You forgot to mention that after you twist off the initial handle, there is a small “female head” hex screw that gets removed before you pull the main assembly off." We were trying everything to pull off the assembly. We even took the whole faucet off. Then we saw another video that mentioned the hex screw. Thanks to both videos! kzread.info/dash/bejne/dYd3j8mPh6bHd6g.htmlsi=pjgkFuPPtsD3RoUk

@alovemadehome

7 ай бұрын

Hope Your comment would help the others! I`ll make it highlighted 🙂

I'll watch this video all day, just for the lovely music.

@alovemadehome

Ай бұрын

At Your pleasure 😀

Great video. Thank you!

Worked as described in the video. Thank you so much!

@alovemadehome

5 ай бұрын

Happy to help 🙂

Thanks for your help! 😊

@alovemadehome

7 ай бұрын

Happy to help! 😊

I was having same issue recently, and I found out that similar cartridges can be purchased in most plumbing stores. Apparently the cartridges are very similar to the hot and cold water stem cartridges for the the sink faucet.

@alovemadehome

7 ай бұрын

They definitely are, and purchasing a new one would solve the problem for more years than repairing the old one. But we`re not looking for easy way out 😉

Love the reference to Depeche Mode at the end :)

@alovemadehome

Ай бұрын

Should've followed the "reach out and touch faith" 😅

Thanks mate i was wondering how to remove the valve assembly, never thought i just need to remove the handle lol. I just clean everything with good old WD40 and install it back and the drip is gone. Thanks again.

@alovemadehome

Жыл бұрын

Yes, sometimes a good old deep clean is the best solution!

Worked great thx!

@alovemadehome

10 күн бұрын

@@luispelaezbover Happy to help!

Thanks, it worked!

@alovemadehome

Ай бұрын

My pleasure

Done. Thanks a lot.

@alovemadehome

Жыл бұрын

Glad I could help 🙂

helped solve my leak. Many thanks...!!

@alovemadehome

8 ай бұрын

Happy to help!

excellent

@alovemadehome

9 ай бұрын

Thank you 🙂

I will up my cap 🎓💪💪💪you are amazing

@alovemadehome

Жыл бұрын

🙂 Thank You

You forgot to mention that after you twist off the initial handle, there is a small “female head” hex screw that gets removed before you pull the main assembly off.

@alovemadehome

Жыл бұрын

Thank You for mentioning that! Yes, it might be on some assemblies, but there are no additional screws on this particular tap in the video.

Where do you buy Citric acid?

@alovemadehome

10 ай бұрын

You can find Citric Acid Powder in your local supermarket/grocery store, usually in the canning section. Or buy it online here amzn.to/48guxkw :)

You put gasket electric tape I can't see clear you put back the tape on the top or the bottom?...

@alovemadehome

9 ай бұрын

I guess it could be called the top - faced to the valve, NOT between the ceramic discs. And try at first with one stripe, with two stripes it might be too tough to turn the valve.

@nate5520

2 ай бұрын

What's the purpose of the electrical tape? Cant see what the tape will be touching but wouldn't water seep in with the electrical tape and get into the drinking water? Was trying to find a direct replacement but the only one that was similar was the Kohler from home depot. Do u know if that one fits or know of one that does? Similar ones on Amazon appears to have fit/leak issues.

Why put electrical tape on the gasket?

@alovemadehome

23 күн бұрын

@@pgabriel6776 We're putting electrical tape on the ceramic disks, not on the gasket. The electrical tape plays the role of the sealer, so that the water has no chance to go though the ceramic disks, when the water is shut off. I hope I was able to explain it somehow 😃

Still dripping but at a much slower rate.

@alovemadehome

8 ай бұрын

If You have done everything showed in the video, including descaling (or removing rust, or any other dirt particles from the valve), then I would add another stripe of electric tape. Otherwise, we have to admit, that things are aging and sometimes we just have to replace them 😕