www.veedubtransporters.co.uk - How to fit our T5 Seat Covers. They can be found here: www.veedubtransporters.co.uk/p...
Жүктеу.....
Пікірлер: 33
@LJT19883 ай бұрын
Mission if you have a bulkhead. I used a cavity tie which helped loads! Very good quality.
@veedubtransporters
3 ай бұрын
Glad you like our covers dude! 🤙
@lathedog14 жыл бұрын
Just fitted these covers on my T6, very nice they are too :-) the driver's seat back cover , as you sit in the seat, the right hand hole for the head rest wasn't punched, so I had to carefully punch a hole, no great hassle. when fitting the driver's seat base cover, it would have been useful if they had included a large bag of assorted, but strong,expletives with the covers, I almost ran out of them when fitting it ;-) I ended up removing the plastic trims around the seat base which made access and fitting a lot easier :-)
@0o0o0999996 жыл бұрын
Thanks, this was very helpful. I have a different brand of covers, and I didnt find any hooks, I'll have to improvise if I don't find any hooks. Also the driver seat has arm rests so i need to cut some slits on the side.
@tattooedfagin Жыл бұрын
Have the Black & Red Diamond Stitch ones on my Black T6 PV with Bulkhead, look great fitted & so much better than the standard covers.
@veedubtransporters
Жыл бұрын
Great to hear that you're pleased with them!
@Monty-kr7py11 ай бұрын
If your'e ordering from Vee Dub , don't be in rush , should be with you soon 😂
@MorganFfion5 жыл бұрын
What about the arm rests you get in the bag? Would have been good to have shown fitting to a drivers seat that has arm rests.
@carlsmith50596 жыл бұрын
Where did you purchase the covers from ,great vid by the way
@robertclayton94677 жыл бұрын
Do these covers fit transporter shuttle (15 plate) ?
@user-ri3sz5js6o2 жыл бұрын
Works great I so needed this
@veedubtransporters
2 жыл бұрын
Great news!
@paulahamilton72902 жыл бұрын
What happens if you have the folding front seat bracket does the bracket rub and destroy the cover as it moves back and forth! Does anybody have experience with these covers on the folding double front seat?
@blimbimful8 ай бұрын
How did you get the back cover plate behind the drivers seat back on? I can see in the video the back plate also has a central ‘pin’, but the fabric is in the way of slotting that back in the hole and the video just skipped past that bit…
@veedubtransporters
8 ай бұрын
Hi Tom, the plastic backing plate should still clip back in without using the centre pin.
@jason78645 ай бұрын
Where do the elastic steps on drives back rest attach? They can’t go underneath to each other or they’d be too loose and just hanging?
@veedubtransporters
5 ай бұрын
These should attach to the metal clips underneath.
@flower63798 ай бұрын
How do we fit covers to T6 with swivel chairs please.
@veedubtransporters
7 ай бұрын
Hi, the process is the same, the swivel seat bases shouldn't change anything as long as you have access underneath the seat.
@StephenLeworthy-rf6wg6 ай бұрын
I cant seem to squeeze the headrests into the headrest covers. The hole doesnt seem big enough to fit into!! Any tips?
@veedubtransporters
6 ай бұрын
Please drop our customer services team an email at support@veedubtransporters.co.uk
@mikestan4594
4 ай бұрын
Yeah same issue
@baransahin10475 жыл бұрын
TÜRKİYE ÜRETİLEN EN KALİTELİ ÖZEL DİKİM DERİ KOLTUK KILIFI TÜM DÜNYA KULLANIYOR
@infinitydragon4647 Жыл бұрын
How do you fit the cover to the drivers seat if you have a kitchen unit behind restricting access? Any tips/suggestions very welcome. Thanks
@veedubtransporters
Жыл бұрын
Hello, we would suggest taking the seat out and reinstalling it once the seat covers are fitted.
@infinitydragon4647
Жыл бұрын
@@veedubtransporters OK thanks 😊 makes sense. I was wishfully hoping for a work around that didn't involve seat removal 🤣 appreciate you answering
@marcck55976 жыл бұрын
That looks like a ball ache. My van has a bulk head also. Scrap it
@doubleedge52 жыл бұрын
Bollocks. Not that easy. When u got bulk head
@peterwilliams88202 жыл бұрын
No hooks included
@veedubtransporters
2 жыл бұрын
Please give our customer service team an email on - support@veedubtransporters.co.uk
@jamesjohnson9710 Жыл бұрын
Drivers seat cover don’t fit the t6.1 as well as it should. Also if you have a bulkhead it’s a nightmare to fat it all.
@veedubtransporters
Жыл бұрын
Hi James, if you're having issues fitting your set of seat covers please get in contact with our Support Team (support@veedubtransporters.co.uk) and they'll be happy to help!
@SHAQATTAQ776 жыл бұрын
Dla mnie to był dramat, 4 godziny 20minut. Siedzenie kierowcy KOSZMAR !!!! I tak zameczek od strony ręcznego niedopiety. Zagłówki MAJĄ bardzo słabą rzepę wręcz ledwo trzymająca. Poza tym długie gumki aż się plączą. Rozwaliłem zatrzaski pod siedzeniem pasażera nie mogąc ponownie włożyć plastiku
Пікірлер: 33
Mission if you have a bulkhead. I used a cavity tie which helped loads! Very good quality.
@veedubtransporters
3 ай бұрын
Glad you like our covers dude! 🤙
Just fitted these covers on my T6, very nice they are too :-) the driver's seat back cover , as you sit in the seat, the right hand hole for the head rest wasn't punched, so I had to carefully punch a hole, no great hassle. when fitting the driver's seat base cover, it would have been useful if they had included a large bag of assorted, but strong,expletives with the covers, I almost ran out of them when fitting it ;-) I ended up removing the plastic trims around the seat base which made access and fitting a lot easier :-)
Thanks, this was very helpful. I have a different brand of covers, and I didnt find any hooks, I'll have to improvise if I don't find any hooks. Also the driver seat has arm rests so i need to cut some slits on the side.
Have the Black & Red Diamond Stitch ones on my Black T6 PV with Bulkhead, look great fitted & so much better than the standard covers.
@veedubtransporters
Жыл бұрын
Great to hear that you're pleased with them!
If your'e ordering from Vee Dub , don't be in rush , should be with you soon 😂
What about the arm rests you get in the bag? Would have been good to have shown fitting to a drivers seat that has arm rests.
Where did you purchase the covers from ,great vid by the way
Do these covers fit transporter shuttle (15 plate) ?
Works great I so needed this
@veedubtransporters
2 жыл бұрын
Great news!
What happens if you have the folding front seat bracket does the bracket rub and destroy the cover as it moves back and forth! Does anybody have experience with these covers on the folding double front seat?
How did you get the back cover plate behind the drivers seat back on? I can see in the video the back plate also has a central ‘pin’, but the fabric is in the way of slotting that back in the hole and the video just skipped past that bit…
@veedubtransporters
8 ай бұрын
Hi Tom, the plastic backing plate should still clip back in without using the centre pin.
Where do the elastic steps on drives back rest attach? They can’t go underneath to each other or they’d be too loose and just hanging?
@veedubtransporters
5 ай бұрын
These should attach to the metal clips underneath.
How do we fit covers to T6 with swivel chairs please.
@veedubtransporters
7 ай бұрын
Hi, the process is the same, the swivel seat bases shouldn't change anything as long as you have access underneath the seat.
I cant seem to squeeze the headrests into the headrest covers. The hole doesnt seem big enough to fit into!! Any tips?
@veedubtransporters
6 ай бұрын
Please drop our customer services team an email at support@veedubtransporters.co.uk
@mikestan4594
4 ай бұрын
Yeah same issue
TÜRKİYE ÜRETİLEN EN KALİTELİ ÖZEL DİKİM DERİ KOLTUK KILIFI TÜM DÜNYA KULLANIYOR
How do you fit the cover to the drivers seat if you have a kitchen unit behind restricting access? Any tips/suggestions very welcome. Thanks
@veedubtransporters
Жыл бұрын
Hello, we would suggest taking the seat out and reinstalling it once the seat covers are fitted.
@infinitydragon4647
Жыл бұрын
@@veedubtransporters OK thanks 😊 makes sense. I was wishfully hoping for a work around that didn't involve seat removal 🤣 appreciate you answering
That looks like a ball ache. My van has a bulk head also. Scrap it
Bollocks. Not that easy. When u got bulk head
No hooks included
@veedubtransporters
2 жыл бұрын
Please give our customer service team an email on - support@veedubtransporters.co.uk
Drivers seat cover don’t fit the t6.1 as well as it should. Also if you have a bulkhead it’s a nightmare to fat it all.
@veedubtransporters
Жыл бұрын
Hi James, if you're having issues fitting your set of seat covers please get in contact with our Support Team (support@veedubtransporters.co.uk) and they'll be happy to help!
Dla mnie to był dramat, 4 godziny 20minut. Siedzenie kierowcy KOSZMAR !!!! I tak zameczek od strony ręcznego niedopiety. Zagłówki MAJĄ bardzo słabą rzepę wręcz ledwo trzymająca. Poza tym długie gumki aż się plączą. Rozwaliłem zatrzaski pod siedzeniem pasażera nie mogąc ponownie włożyć plastiku