THIS IS BY FAR the very best "information" I have seen regarding the Jeep WK and oversized tires. Everyplace else on the internet (ie: forums) tell you to go to a really high lift and I have always hated that idea. I have the 2006 5.7L Limited with the stock front & rear E Lockers and I love it! I'm not one of those people that needs a thousand mods but I have been looking into this exact setup (rocky road 2.5 + bilstein 5100s). I liked this video so I can refer back to it later when I purchase the lift and tires.

@Kordare

5 жыл бұрын

I felt the same way, I love the height mine sits and didnt want to change it to run bigger tires. I'm glad I could help!

Thanks for showing what it is like with that area cut away. This is the first video I have seen of that area cut off.

I've also got a hemi grand cherokee. I absolutely love it. This video gives me so much inspiration.

Thanks for the vid and dope Jeep man!

Nice jeep . My 2007 3.0 jeep got a Rocky road lift also and my front end turned out higher than the rear now i need to lift the rear up more

No annoying music. No annoying voice. Keep it up.

@Kordare

2 жыл бұрын

Thanks for checking it out 🤘

Dang 35s. I have Nitto Terra Grapplers and love them. Yours are legit tho.

This man just achieved Chevy truck figment on a WK. Slow clap it out people....

I know this is old but I put the same tires on my ram sport... can't go wrong with nittos ive had mud grapplers, trail grapplers, and now the ridge grapplers and I love them!

@Kordare

3 жыл бұрын

Yes I have been very pleased with the ridge grapplers!

That's insane yo

cool setup man

@Kordare

5 жыл бұрын

Thanks!

That's bad ass I got a 05 cherokee 4x4 love jeeps

@Kordare

4 жыл бұрын

Thanks man🤘

amazing video and fab . legend!!

@Kordare

4 жыл бұрын

Thanks🙌

Oh you're the guy I watched do a bolt on wide body a few months back. Small world. 👍😉

@Kordare

4 жыл бұрын

Yuuup🤘

@xmo552

4 жыл бұрын

@@Kordare I liked the outside the box thinking and execution on that Mustang.

@Kordare

4 жыл бұрын

@@xmo552 thanks it was fun to try something new 🙌

If you go off roading up to Four Peaks on the dirt road off of the I-87 in Arizona, those tires would rubbing over the uneven dirt road because of wash boards and boulders somewhat due the articulation and movement of the truck compared to the tires and fender well gaps being small.

Friend, I want to know how you did it or what I should do so that my great Cherokee looks like yours with those tires

I love this video and your Jeep. You do a great job showing your process. People need to realize you can run a lot of rubber if they're willing to do some research and work. Thanks for inspiring me to put more custom work into my Jeep.

@Kordare

4 жыл бұрын

Thank you for the kind words, and I'm glad I could help. With some time and effort anything is possible. Good luck with your Jeep!

@717UT

4 жыл бұрын

@@Kordare You're welcome. Any hints for welding on these unibody Jeeps? I personally don't own a welder or a shop but I have friends that do. Someday I'd like to take some time and tinker with all the fenders. Maybe even the metal behind like you did. Next set of tires I'd like to step up another size.

@Kordare

4 жыл бұрын

@@717UT I just used mig on this, but in general the best thing you can do is make sure everything is clean before you start to weld. Hardest part is getting rid of all the paint. Also you need to watch out for starting fires with the sound insulation inside the unibody.

@717UT

4 жыл бұрын

@@Kordare Thank you

@team_suv7778

4 жыл бұрын

Max Federle o yea man his Jeep is awesome looking I had an 04 grand Cherokee WJ and I had a 2 inch budget boost on it with 35s every forum I read said it couldn’t be done but with a little cutting a moving some metal I had the only one around

Damn now I wanna do this to my 05 Grand Cherokee with the Hemi. So much hope now😂

@jaisonslayer1494

3 жыл бұрын

Yeah man I have a 2005 wk and I have a 3 inch block lift and 33/12.50r18s on it and it only minor runs

@blainetrevino689

3 жыл бұрын

This makes me sad bc I had a 2006 with a hemi before my wreck and now I have 2008 with the v6 and not as good Bc of where the one I have now is from

@danvroom999

3 жыл бұрын

Jaison Slayer14 do you got pics of your setup??

Mennnn...i wish my jeep looked that cool!!!!

@Kordare

4 жыл бұрын

🙌🙌

Bilstein's were an EXCELLENT CHOICE. Good job on the fab. work But does it make contact during FULL ARTICULATION of the front I.R.S front Suspension ?

@Kordare

6 жыл бұрын

I haven't done too much hard offroading since doing this, but with the little I have done, I haven't noticed any rubbing. I'm planning to do some more testing soon.

Any off road use man? How is the rubbing if you're driving over rock?

u should weld in a triangular piece between the plate u installed and the part u left hanging down to keep crud out, nice job tho

@Kordare

6 жыл бұрын

Yeah I had the same thought, thanks!

Kordare, I have the bilstien 5100 on my jeep, but did you setup the shock to sit on 2.5 in lift or you left the o-ring to the last placement

I just bought an 05 GC Limited with Hemi and 66k miles, it looks new. I plan to lift it and put some bigger tires on.

@Kordare

3 жыл бұрын

Awesome I need to build one of those next

@hadeslmao8866

3 жыл бұрын

Jealous, I got a 05 GC too but she’s only a 4.7 with 170k but I plan on hemi swapping her

Definitely is gonna hit on the trails

@Kordare

Жыл бұрын

Yeah but it's waaaaay better. These days I'm only at full lock while parking so it's fine

your shop is brand new. your lift is brand new ... damn bro

@Kordare

5 жыл бұрын

You're not wrong

@33valleys28

5 жыл бұрын

@@Kordare by doing what?

@Kordare

5 жыл бұрын

@@33valleys28 hard work and patience

i run 5100 bilsteins at 2" and even my 31's rub sometimes while turning

@Kordare

5 жыл бұрын

Yeah it's hard to fit anything bigger at all without doing something about that pinch weld.

I must be missing something... I have the OME lift and I can only fit 32s. Even then I had to do the pinch weld and rear fender fold.

@Kordare

6 жыл бұрын

I also have the bilstein 5100 shocks which raised the front an extra 3/4", then also modified the rear spacer to add an extra inch. I explain it at the beginning of this video.

@RevereOverland

6 жыл бұрын

Thanks! That's crazy that the extra inch front and rear with some light cutting allows you to have such a large tire.

@Kordare

5 жыл бұрын

@@ubermac85 this vehicle specifically doesn't have much room at all behind the front wheels so unless you want to lift it 6" and still only have 31's, you'll need to cut or modify something.

@bradlyevans862

4 жыл бұрын

@@Kordare so question..stock spring,with the budget 3in lift(added more in rear)..question comes what model shock(length) of the bilstien 5100?

@Kordare

4 жыл бұрын

@@bradlyevans862 dont remember specifically but the ones that are made to fit the wk

Nice. Wouldn't mind getting my Hemi Limited Commander looking that way.

@Kordare

4 жыл бұрын

Do it!

@marshallreede5577

4 жыл бұрын

@@Kordare definitely in the works man...trying to figure out how to get most lift for the cheapest price lol. What's yours consist of???

@Kordare

4 жыл бұрын

@@marshallreede5577 mine is basically just spacer blocks but I also did new struts all around. Stock springs.

@marshallreede5577

4 жыл бұрын

@@Kordare right on. Appreciate the reply.

@Kordare

4 жыл бұрын

@@marshallreede5577 anytime man!

I have an 05 wk hemi on a superlift 4” inch with 33s all around!!

@Kordare

5 жыл бұрын

Sikk!!!

@marvingiron9026

5 жыл бұрын

Kordare thanks brotha!! Love the roof rack tho been wanting to get one bad!

@Kordare

5 жыл бұрын

@@marvingiron9026 thanks!

that is crazy shiny clean floor in a garage.....

@Kordare

4 жыл бұрын

It was brand new in this video

nice video men thanx 💯 & quick question what's the biggest size tire that i can fit on the factory wheels ? btw the factory size is 235/65r/17. with that in mind i was thinking on like a 245 or 255 not sure yet what can i fit & keep it looking like factory without lifting yet. any suggestions men ?

@Kordare

3 жыл бұрын

I did 265/70/17 with stock wheels but I had a 2 inch lift and did the pinch weld mod

Is there avaliable good torsen differential for these Jeeps(WK) .I must order specially from USA. I'm from Europe here we drive 3000cc CRD diesel :) Cheers

No problem until you get anywhere offroad I thought you had something going but 1 root or off camber crawl will eat the tire off still

@Kordare

6 жыл бұрын

It's definitely not perfect but a huge improvement over what I was dealing with previously.

@Kordare

5 жыл бұрын

Please see my latest upload, no rubbing with some high speed offroading.

what does it costs to set it up like yours without tires?

Makes me wonder, how does the process differ for WJs? :) Thanks for the video!

@Kordare

4 жыл бұрын

Probably would be similar but I've never worked on a wj so I can't say for sure.

@bradlyevans862

4 жыл бұрын

Wj are straight axle..same but more simple

@xmo552

4 жыл бұрын

Just cut more. Our WJs have dinky wheel wells. 😩

Beautiful Jeep. What is your wheel offset?

@Kordare

4 жыл бұрын

Honestly dont remember, but the wheels are pro comp 17x9, standard offset. I also do have 1 inch spacers.

I have a 2005 WK Limited with the Hemi. I used a Old Man Emu lift and the Rocky Road leveling kit. I currently have 265/70 tires on the stock rims, but I do get some rubbing when I turn under power, not sure what is causing it, I cant see any place in the fender well. I am planning to put rims from a Rubicon Wrangler/Gladiator next year. I am not very good in the shop, so cutting up my Jeep would not be a great idea. I do like your WK, keep up the great videos

@Kordare

11 ай бұрын

Look up doing the pinch weld mod, it is pretty simple and will solve your issue. Good luck and thank you!

@PreparedOverlander

11 ай бұрын

@@KordareI have already done that. The rubbing dont stop me from driving it, its just annoying that I cant find where its comes from.

How much of a spacer would I need to run to clear the front 295/40R /20 all for corners I was thinking a 1.5. Or 2 max

@Kordare

5 жыл бұрын

Honestly I dont know, I never ran anything like that. Use willtheyfit.com to get an idea where they will sit in comparison to stock.

Got the same lift and only wanting to run 285s will I be able to with on flattening the pinch and cutting bumper?

@Kordare

5 жыл бұрын

You need to flatten the pinch weld with anything over 30" tires.

Do you have any issues with upper ball joints or cv shafts? Buddy had a wk and after installing his spacer lift he seem to run into issues.

@jg7618

5 жыл бұрын

Fixed the issue yet? I had the same problem with CV axles. But with new shocks.

So if I am understanding this correctly all you have is spacers for the lift to get the 35s?

@Kordare

3 жыл бұрын

Yeah and I have bilstein 5100 shocks which lift another 3/4" in front so I'm lifted 3 inches all around

Hey man! Sorry to add to all the darn tire ?s but I have about 3.5" lift , 23.5" front and 24.5" rear, and I'm looking to possibly get some 295/70/17 tires (33ish") . My wheels are 17x9 with 4.75" backspace. I know I'll have to do the pinch weld, but other then that, I'm guessing I shouldn't have to many problems fitting these, right ?

@Kordare

3 жыл бұрын

Definitely need to do the pinch weld but otherwise you should be okay

That thing is a beast! Have you tried flex?

@marcindonica3488

6 жыл бұрын

Joey Shoe I have similar ideas. Can't wait pt.2 😀

It's funny everyone wants the largest tires they can squeeze on their 4X4, but I saw a great viedo from "The Road Choose Me" and he traveled around Africa for 54,000 miles on 32.5 tires and had no problems

@karlgustav5490

3 ай бұрын

it's called american badass syndrome 🙄

Need to smooth that. On a pitched turn (suspension compressed) the tires will still rub. Furthermore, if it isn’t completely smooth in the well the imperfections and edges will slice and grind the rubber.

@Kordare

3 жыл бұрын

Yeah this definitely isnt gonna solve all rubbing but I was mainly concerned about when I go full lock when parking or turning around, at which point suspension isn't compressed. Also when it does rub it hits right on the smooth surface so it doesn't chew up the tire.

thinkn you shoulda cut higher.. for wheel travel going up.. looks like you just fixt it for static turning,,,

@Kordare

5 жыл бұрын

Yeah probably could go a bit higher, but after doing some offroading I didnt notice any rubbing

@ kordare so you have the bilstein shocks and a 3in strut space on top? Also what lift setting did you set the bilstein shocks to? And do you think I could set the bilstein shocks to 1in and use strut 3in spacers to achieve 4inches of lift in total?

@Kordare

4 жыл бұрын

Hey I have the bilstein shocks set to 3/4" lift and a 2.25 inch spacer on top. I wouldn't go much more than 3 inch total lift without changing more suspension components because the geometry will be way off for stock control arms, etc.

@favian4527

4 жыл бұрын

Kordare thanks appreciate the help

@Kordare

4 жыл бұрын

@@favian4527 anytime, good luck!

I like it 😏😏

@Kordare

4 жыл бұрын

Thanks 🤘

What brand was the extra inch spacer and how long and strength of bolts do i nees to add the spacer

@Kordare

4 жыл бұрын

The wheel spacers are spidertrax and they include new studs

Sorry to comment on this so late but with pinch weld mod and a 3" lift I can run 35s?

@Kordare

3 жыл бұрын

You won't be able to turn fully with anything more than 32s. You'll have to do what I did in this video to fit anything larger

U really did 😂nothing 😂

@Kordare

Жыл бұрын

Ha well this took like 12 hours to do so I feel like I did something

What's a good setup to fit 33s on a 2wd 2007 commander

@Kordare

4 жыл бұрын

Not sure I've never had a commander

How much is it lifted and what tire measure do you bring?

@Kordare

5 жыл бұрын

Lifted 3" all around with 305/70/17

2010 wk, no lift, no aftermarket shocks and all body's , running 35's, twin turbo and no problems turning or rubbing.

@Kordare

6 жыл бұрын

ha what? You cant even fit 31's on a wk without a lift

@boomersooner9600

6 жыл бұрын

@@Kordare haha...yeah they do fit. And if you like send me a number or an email and I'll send you pic of my jeep sitting outside right now.

@Kordare

6 жыл бұрын

joey@jshoe.org

@Kordare

6 жыл бұрын

Looks sweet! But I don't understand how you can get to full lock without hitting the pinch weld...

@boomersooner9600

6 жыл бұрын

2 inch wheel spacers, the inner fender liner is taken out and re done and the pinch mod alot of people do is done, but I tore out alot more metal than most do. Also trimmed the front bumper , heated the fenders and rolled them out.

If I wanted to put a 5in lift in my wk would it damage any other components

@Kordare

2 жыл бұрын

Look up super lift. That's the only way to lift more than 3 inches.

What rims are you running? Looking to change my stock rims

@Kordare

5 жыл бұрын

These are pro comp steel wheels. I believe 17x9.

Nice work bud but all that work on a 3.7? You'd have really liked the 5.7 with Quadra-Drive 2

@Kordare

3 жыл бұрын

This is a 4.7 and yeah I'll probably build a 5.7 soon

How can I make my 3.7 4x4 sound like this ? Anybody know ? Also I wanted to try 33s but I’m scared it’s gonna be to much for the v6?

@Kordare

Жыл бұрын

Swap to a V8😂 33s likely are a bit much for the V6 without changing gearing

What kind of lift do you have in it I have a 3" lift kit and I want to get 33 but I don't want to cut anything do you think it was

@Kordare

5 жыл бұрын

I'm lifted 3 inches all around so you'll def need to cut stuff to get full steering lock

@evall410

4 жыл бұрын

Did you end up doing 33's? How did the pinch weld go

Where’d you get your hitch I need one for my 4.7

@Kordare

2 жыл бұрын

It was on it when I bought it. I'm sure you can buy them online

Wen u took the muffler out but kept the cats, does it still pass emissions???

@Kordare

5 жыл бұрын

Yes it does.

@JT-ii8wo

5 жыл бұрын

Mufflers have nothing to do with emissions... they are only there to help with back pressure during the exhaust cycle of the engine...

@littlenobody424

5 жыл бұрын

Cool, thanks fellas. 1luv

Hey bro , i want to put some 35s on my cherokee 2006 which lift kit do you recommend thank u and how can i find it

@Kordare

3 жыл бұрын

You probably need a 4 inch superlift to fit 35s without major cutting

@AyyItsJk

3 жыл бұрын

3" Waverspeed and major cutting works too

Been looking for a clear answer to this question for a while now. Hope you guys could help.... Can I fit 33/12.5/17 inch tires on my jeep WK1 with factory wk (limited) rims, a rough country 2 inch lift and wheel spacers and have no rubbing issues. If so, what size spacers will I need? Thanks

@Kordare

5 жыл бұрын

You will definitely rub when you turn. You need to do the normal pinch weld mod shown at the beginning of this video. You will still most likely rub near full steering lock

@robdonaldson2124

5 жыл бұрын

Okay thanks a lot for the info man

@Kordare

5 жыл бұрын

@@robdonaldson2124 no problem, good luck!

@danielroman8934

3 жыл бұрын

@@Kordare can I put 33/12.5R17 on 3inch lift kit

@danielroman8934

3 жыл бұрын

On a Jeep Grand Cherokee 2006

What’d u do to get the rims and tires out that far, is it the rims? What’re the measurements because I’ve been trying to get a fitted like that

@Kordare

2 жыл бұрын

Low offset wheels and also have 1 inch spacers. They are pro comp 17x9 wheels.

@joe2000jd26

2 жыл бұрын

@@Kordare oh word thank you homie

Hey bro I know this is a old video but I just wanted to ask you did the 35 tire fit in the back with no problem thanks

@Kordare

3 жыл бұрын

Yes they did!

@juniorg3472

3 жыл бұрын

Thanks bud love the channel new subscriber

@Kordare

3 жыл бұрын

@@juniorg3472 appreciate the support🤘🤘

In this video is your jeep stock with no lift? I'm wondering if I do the pinch weld mod if I can fit 35x12.5x17

@Kordare

3 жыл бұрын

Nope I have a modified spacer lift and shocks. Lifted 3 inches all around

@osky7777

3 жыл бұрын

@@Kordare What would be the biggest tire to put on without doing any mods?

@osky7777

3 жыл бұрын

well with a pinch weld mod

@Kordare

3 жыл бұрын

@@osky7777 I had 31.6" tires with only the pinch weld mod. That's prolly the max to get full steering lock

what rims are those? size and brand?

@Kordare

4 жыл бұрын

Pro comp 17x9

I’m running KO2 34/10.5/17 on rubicon take off wheels and 1.5 spacers on the wheels... 4” lift in rear and 3-3.5” lift front. Suspension no spacers. And my tires barely clear the rear towards the door... I have no clue how you stuffed those tires there... they look bigger than mine

@Kordare

5 жыл бұрын

Haha yeah I even had that 35 on the rear for 100 miles or so and no rubbing.

@RealPureHD

5 жыл бұрын

Joey Shoe got an insta?

@Kordare

5 жыл бұрын

@@RealPureHD yup! @kordare_

what rims are those?

@Kordare

6 жыл бұрын

Pro comp 17x9

@ppi_god_619

4 жыл бұрын

What backspace

I think I would have hacked a straight angle and cut off a bigger chunk and welded a flat plate in, and primered and painted it.

Are u using wheel spacers????

@Kordare

3 жыл бұрын

I have 1 inch spacers

U think I can fit 285/75/R16 on a 2007 Jeep WK with a 2” old man emu lift?

@Kordare

3 жыл бұрын

You'll definitely need to at least do the basic pinch weld mod, even then you may still rub

@HooodTv

3 жыл бұрын

@@Kordare thank you. What’s the biggest mud tire I could fit on a 2.5 inch lift? With the pitch fold

@Kordare

3 жыл бұрын

@@HooodTv normally 265/70 to still get full steering lock

@HooodTv

3 жыл бұрын

@@Kordare on a 16 or 17 inch rim? Sorry to bother you but you have like the most knowledge in here when it comes to WK Jeep’s lol. What do you think of this lift kit? www.streetrays.com/sr-usa-steel-lift-level-kit-for-jeep-grand-cherokee-wk-commander-3quot-2005-2010.html

@moiseconcha5328

3 жыл бұрын

Can it be 16 "is the smallest measure or only 17 minimum?

I have a Commander lifted 3 inches. Everywhere I go they tell me the 5100 isn't available. Can you tell me where you got yours and if their ride adjusting?

@Kordare

5 жыл бұрын

It's been years but I bought online somewhere, the fronts are height adjustable

@kodylowery352

5 жыл бұрын

@@Kordare Did you see a noticeable difference in rear ride height after switching to the Bilstein. Im going to end up swapping all 4. I have the RR lift as well but it seems my current shocks are iffy.

@Kordare

5 жыл бұрын

@@kodylowery352 I did the lift and shocks at the same time so it's hard to tell but the rear shocks arent supposed to affect ride height.

@kodylowery352

5 жыл бұрын

@@Kordare Yea I have Skyjacker shocks in the rear right now but, I contacted Bilstein and they say they don't make an absorber for the WK/XK past stockride height but I see people online , forums etc that have them. Im completely stumped

@Kordare

5 жыл бұрын

@@kodylowery352 check rocky road, they might sell them

Guys..I want to go with a vintage fat look on my small van. Can I fit 15x8 5x100mm pattern +12mm offset Basset Steel wheels wrapped in 275/60/15s on a stock 2018 Promaster City which currently has OEM 16x6.5 5x98mm pattern +52 offset wrapped in 215/55/16 . Both are around 25.5 high, the newer is close 10.8 wide vs 8.5 wide, but will also sit out further. I've read the van does allow 15 inch rims. I know bolt patterns are not identical but others are using 45 angled bolts. Thanks!

@Kordare

5 жыл бұрын

Fitment is always vehicle specific. I'd suggest using willtheyfit.com and enter all your current and new specs and it will show you exactly where the new setup will sit compared to your current one.

@12vLife

5 жыл бұрын

Nice Site! Got this: "Compared to your existing wheel, this new wheel will have an inner rim which is 21mm further away from the suspension strut. The outer rim will poke out 59.1mm more than before. " www.willtheyfit.com/index.php?width=215&aspect=55&diameter=16&wheelwidth=6.5&offset=52&width2=275&aspect2=60&wheel_size=15&wheel_width=8&offset2=12

@Kordare

5 жыл бұрын

Great, so you should have no issue on the inside, now just measure on your van if you're okay with 60mm more poke, which is about 2.5 inches.

A 10"--12" lift is need with that big of tires.

@Kordare

Жыл бұрын

Haha that amount of lift is physically impossible on this platform unless you rebuild literally everything

How many of you told your head to the left to take a better look at where it ribs in the front 😆 I did 🤣

What jeep is that? What engine also?

@Kordare

5 жыл бұрын

2005 grand Cherokee, and it has the 4.7 v8

How come it does not rub on the passenger side when going full lock right ?

@Kordare

5 жыл бұрын

It rubbed the same on both sides before I did this mod

@haroldcallahan4887

5 жыл бұрын

@@Kordare mine was only on the drivers side

@Kordare

5 жыл бұрын

@@haroldcallahan4887 that's really weird, they should be the same

what if jeep is weighed down or has a tow load?

@Kordare

4 жыл бұрын

I haven't had issues rubbing in the rear unless I'm offroading

What is the exact size and measurements of your Rims, and Tires ?

@Kordare

3 жыл бұрын

17x9 and 305/70/17

Good job dude! Also the WK Hemi 5.7 V8 could fit 17” wheels? Or it’s a problem for brakes? Thanks

@Kordare

3 жыл бұрын

Thanks! I'm not completely sure but I'd assume so.

What size tire is that?

@Kordare

5 жыл бұрын

My tires are 305/70 but at the end I test first a 35"

Clearing on flat ground barely, rubbing still for sure with any articulation

@Kordare

Жыл бұрын

Either way 100 times better than it was. I'm really only at full lock while parking, on flat ground.

Will 295 fit in the front without spacers?

@Kordare

5 жыл бұрын

Depends on what else you have done

@MrDOA313

5 жыл бұрын

Nothing just a stock 06 Cherokee 4x4 Hemi , What all needs to be done I was thinking 1.5 spacer

@MrDOA313

5 жыл бұрын

Kordare 295 /40/20

@Kordare

5 жыл бұрын

@@MrDOA313 you definitely need some type of lift, even with 3 inch lift and 1 inch wheel spacers you need to do the pinch weld mod to fit 265/70. Anything more you either need a bigger lift or do what I did in this video.

@Kordare

5 жыл бұрын

@@MrDOA313 295/40 is only like 30 inches so you might be able to get away with just a wheel spacer

I know this is late but could you have fit 35s?

@Kordare

2 жыл бұрын

Yup I put a 35 on at the end of this video

@johnmcdonnell4813

2 жыл бұрын

@@Kordare did you have to mess with the gears at all going with 35s

@Kordare

2 жыл бұрын

@@johnmcdonnell4813 I didn't but it would definitely help if you did.

What keep is that

@Kordare

2 жыл бұрын

Wk Grand Cherokee

Nice

Looks good, as long as you stick to mall parking lots...

@Kordare

4 жыл бұрын

Hahaha nope I live in the middle of a forest

How is it offroad without QDII ??

@Kordare

5 жыл бұрын

It does pretty well, you really miss it in snow and mud situations. Open diffs suck!

@timjanda13

5 жыл бұрын

Kordare i can imagine it! I have a CRD with QDii

This the 3.7, 4.7 or hemi?

@Kordare

2 ай бұрын

4.7

10:20 me jodistes los ojos!!! estaba sin pantalla!!!

a litle rock or bump and it hits ??

@Kordare

3 жыл бұрын

I'm only full lock when parking so it basically never hits

Where you get your rims from

@Kordare

5 жыл бұрын

Craigslist!

@randyroberts8240

5 жыл бұрын

@@Kordare what are they called if you don't mind me asking am trying to find some for me jeep having no luck

@Kordare

5 жыл бұрын

@@randyroberts8240 pro comp 98 series

What's the wheele size on that ? 000/00/00 ?

@soybarbon1999

6 жыл бұрын

Joey Shoe thank you so much ! Any info on the rims ?

4.7L Magnum?

@Kordare

5 жыл бұрын

Yup it's the 4.7

@yerwrng

3 жыл бұрын

The 4.7 is a power tech and 5.7 and bigger are hemi . Chrysler hasn't used the magnum badge in a jeep since 1998 . Yes I know that's an anal reply ;-)

Lift it more?

@Kordare

5 жыл бұрын

That's an option. I like the lower center of gravity

Will I rub on a 4 inch lift? Fitting the tires you have in?

@Kordare

3 жыл бұрын

You'll probably need to at least do the standard pinch weld mod

@HooodTv

3 жыл бұрын

@@Kordare thank you soo much. What lift you have exactly on ur truck. I might get ur set up instead. And were can I find it? Thanks

@Kordare

3 жыл бұрын

@@HooodTv I have the rocky road 2.25 lift but modified in the rear to make it 3". Also used bilstein 5100 shocks

@HooodTv

3 жыл бұрын

@@Kordare were did you purchased or what you do to add the extra inch in the back?

@Kordare

3 жыл бұрын

@@HooodTv I welded a piece of pipe on top of the spacer and I think I ordered on rocky road website

Is this the same jeep that was totaled and that you tied to a tree?

@Kordare

3 жыл бұрын

Yuuuuup

Wat year is this

@Kordare

4 жыл бұрын

2005