How to fit a racing steering wheel to a Porsche 924 - Part 35
Автокөліктер мен көлік құралдары
Hi everyone,
Please consider subscribing if you like this type of content and thank you for the support!
In this video, I fit a racing steering wheel and a new hub boss connector to take the new steering wheel.
As always thanks for watching and for the support.
Witty 924
Follow my podcast at anchor.fm/witty-924
Follow my Instagram updates at / witty924
Пікірлер: 11
Thanks for the video. Do you have power steering in your 924? Mine doesn’t and I can’t think how much heavier it’ll feel with a smaller steering wheel :(
@Witty924
8 ай бұрын
Hi Deeovid, thanks for the comment snd support. No power steering on mine either and still great to drive. The steering feel hasn't been compromised if anything it's made it much more engaging and easier to throw around 👍🚙💨. I hope that helps!
I’ll be putting one on mine maybe a quick release, let me know more about the events because I wanna get mine to some for chintz motorsport
@Witty924
Жыл бұрын
Hi Alex, thanks for the comment and support. Great to hear you are doing similar work, be great to see the quick release set up you install 🚙💨👍. Let's connect on Instagram and I can share some of the sprints and hill climbs I'm planning to do 🤞
Can you link the hub that you used? Thank you!
@Witty924
Жыл бұрын
Hi Cole, thanks for the comment and support. Here is the link to the hub boss I ordered www.ebay.co.uk/itm/183521935921 hope that helps 🤞👍
Looks great Mr. Witty! Question for you: my 1977 924 has a rough/ low idle (around 500rpm) and it can barely accelerate under 2000rpm but comes to life after that. I saw your video about how crucial the regulator is, you think that could be it? That, the cat being plugged, and vacuum leaks are what I'm thinking are the main suspects. Would love your insight!
@Witty924
Жыл бұрын
Hi Ali, thanks for the comment and support. So if your car is struggling at idle starting with the warm up regulator is a good place. Also check your auxiliary air value which is connected to your vacuum hoses. As you say make sure the hose are good with no leaks including the o rings on your injectors as air can get in there too if they are bad. Let me know how you get on 🤞👍
Thank you for your video..can you please explain how you replaced your shift knob from factory? Looking at replacing mine on my 87 924s....I'll check if you have another video on it.
@Witty924
Жыл бұрын
Thanks for the comment and support Ryan. I'm just about to do a new video on the gear shifter. Will.have that done in the next week 🤞👍
@ryansratner
Жыл бұрын
Looking forward to seeing it