Want to know what fits your truck? Thats what our gallery was designed for! Rubbing, Trimming, And all the fitment specs you need to know - Here: www.customwheeloffset.com/wheel-offset-gallery

@richardthompson3638

4 жыл бұрын

So I have a stock 01 Tahoe. Will 33/12.50/17s fit ?

@imyograndpapy6346

4 жыл бұрын

What size leveling kit is in that truck I just got a Tahoe and I have 22x12 on a 305/45 just want to know before I buy something

This video helped me fit my 12 wides and 33s. Thank you for sharing the knowledge custom offsets, there are some of us that are not haters and appreciate what you guys do! Thank you!

thanks for the video guy's! just did this same cutting on my 02 GMC Sierra with a leveling kit and fit some 20s on 33s now we rolling..... thanks again

Just did this to my escalade with pliers hammer pocket knife and metal snips. It can be done! Thanks for giving me the idea! They don't rub at all anymore.

Sean, you know why custom offsets has been so successful? Because it takes dedication and a love of what you do, and you show it in this video.....kudos to you man! Wish I lived closer or had the time to come by, but either way just wanted to give you 👍👍, you've built, what I can tell, an almost perfect business.

@CustomOffsetsTV

5 жыл бұрын

Thanks for the love and appreciation! Its friends like you that keep us going and pushing harder every single day!

4:37 "Were over it, its part of doing business" great customer service

@jpwrangler1

6 жыл бұрын

716 eqz I have the same set up 12 wides 33s just leveled and did everything in this vid and the washer bottle is all that hits only at full turn, unless i want to relocate it witch I don't I'll live with not being able to get that last 1/4 turn of the wheel. This is also what the customer wanted witch is what he ment by his statement.

@bluepacman13

3 ай бұрын

@@jpwrangler1 Instead of relocating the fluid bottle, couldn't you just heat it up and deform it inward to make clearance?

@lyrikzthekid7165

21 күн бұрын

@@bluepacman13or just raise the bottle a few inches with some washers

My 06 with 18/35’s rubs a little on the passenger side bumper, more so when I have a passenger and turning hard left. I’m running a 6” lift. I think it just needs some trimming, but it’s so close to the lower valence mount that I may lose the valence. “Cost of doing business” I guess lol. If I went with a iron cross or similar steel bumper it wouldn’t be an issue anymore. Great vid, keep up the good work!

Thanks you've inspired me. Just ordered set of 20x12 -44 with 29-30in tires. Hope it fits without leveling kit. Def gnna need mode modding im sure.

Every high-schoolers dream. Fitting 33's and 20x12's on a stock truck

@itstankbitches

8 жыл бұрын

😂👍

@alexburoker7470

8 жыл бұрын

fit 33s just fine on my 91 reg cab short box 4x4 Not k1500. Not sure but I think they sit a little higher than extended cabs stock. Btw Your truck is by far one of the best k1500 builds on KZread man. Looks Awesome.

@xXShadowRejectsXx

8 жыл бұрын

+Motley Drummer the older trucks and some newer ones fit 33s like a glove. There are some years though that disagree. And thanks man I really appreciate the kind words.

@rockymtnredneck4888

8 жыл бұрын

His and BADZ71 are the best looking 90s Silverados on youtube right now, agreed.

@grantspring3871

7 жыл бұрын

I have a 05 Sierra 2500 that fit 12 wide 33s like a glove

That’s what I did but with out the leveling kit on it stock front and back had to trim the front bumper not to hard I got to get the back trimmed up but love the look a lot better than one lifted up nice job...

Nice work looks great! Gave me the info I needed to install my Wife’s Rough Country 3” leveling kit and her 33x12.5’s thx lots guys keep up the good work!

@brycestilwell

5 жыл бұрын

Wut size tires did you run?

That's sweet,wish I was close I'm in Toronto with an 04 Silverado.Nice work!

I have done this with 20x65x275 on a 99 Silverado 2WD, and it will continue to rub on the washer fluid housing until it rubs a hole in it. And the plastic will catch and rub. I just took it out all together. Plan on relocating it. The driver side also has cables behind the plastic in the fender well.

love the full blown fuels...have them on my stock height 01 silverado with no leveling kit running nitto mud grapplers 33x12.5x20 and just minor trimming..rubs on washer bottle too

yes it has to do with the diff types of lifts and alot of truck guys run spacers as well. And most leveling kits are 2.5inches. I need to talk to someone at your shop about wheels and tires for a brand new 2016 Tacoma trd off-road.

Would you be able to do with with 14 wides on the Rams since they already fit 12 wides stock?

I just finished doing this same thing to my 2003 tahoe. I'm running 20x12 -44 offset Red Dirt Roads with 305/55/20 Mickey Thompson Baja ATZ's. I purchased my setup through Custom Offsets and they are a fine outfit. I must say however, that the amount of work required to create necessary turning clearance with only a leveling kit is not for the weary. Cutting the front bumper is the easy part. It's what's in the rear that's a challenge. There's quite a bit of structural steel behind the fender liner in the rear of the fender that needs to be cut and folded to make clearance. It took me a few attempts to get enough of the steel out of the way and I still have slight rubbing in the front driver's side. My driver's side tire rubs on the windshield washer reservoir like mentioned in this video and will likely need to be relocated or eventually I will wear a hole through the reservoir rendering it useless. Relocation will mean fabricating a bracket of some sort, rerouting and extending existing wiring and tubing. Overall, I'm pleased with the results and absolutely love the new look of my rig. I will also point out this is the greatest length I've gone to in order to put a set of rims and tires on a vehicle and let others know that if you are planning on a similar setup to be prepared to take on a pretty significant undertaking.

@tankdog03ify

4 жыл бұрын

Cover the washer fluid tank with a piece of sheet metal to prevent it from rubbing through the plastic

@adamvigil6780

2 жыл бұрын

How much is a leveling kit for your tahoe

@RYTHMICRIOT

2 жыл бұрын

@@adamvigil6780 They're cheap. 60-80$

I did 35s with stock 17s on my suburban used it like that for about 2 month till i put ford keys & 2.5 coil spacers in the back

Awesome job!! It looks great! I would like to see you guys do the same thing with a 2013 2500HD Silverado.

I have 35 on my stock 07 new body they only rub at full turn going to take them off and put 33s hopefully it wont rub no more?

Wats up fellas....how much cuttin will i have to do to be able to fit 20x12 -44 on my 2008 silverado????will be adding a 2.5 rough country levelin kit....thanks in advance

I did the same size specks on a 2000 silverado with 3inch cups and didnt have to trim anything..but it does rub very little on that water jug.

If the same truck without the leveling kit and without trimming:What wheel/tire could it fit? Im looking for some fuel rims (20x9 or 20x10) and the tires to stick out about 1 inch without trimming the body nor lifting it (due to garage height).

My 03 Sierra is leveled on 285/75/16 (32.9x11.2) and after plastic liner trimming it still rubs pretty good on the washer fluid tank, any solutions for that?

What offset do I need on rims I want to run 305 55 20s on my 2009 2500hd with zone 3" lift.. I'm also thinking about adding fender flares

would I have to trim anything to put this same setup on my 2003 Silverado 1500 quadrasteer?

hey, need some help. i got an 01 silverado 1500, i leveled it and have 285/70R17s with no rubbing whatsoever. heres my ?, i want to do wheel adapters for more aggressive look. can i do 2 inch spacers with no issues?

is this a leveling kit drop or lift ? fit my 33s on my torsion bar lift easily

Have you ever cut off the front crash bar on the 2016 f150? i have 18x12 with a 33 inch tires with a leveling kit, it rubs on the front crash bar. Can i remove it?

I have a 2000 1500 stock right now, planning on putting a rough country leveling suspension kit with keys in, eventually new tires and 2" wheel spacers for stance, what is the biggest tire size i can fit without cutting. Can i fit 12 wide or would i have to go with 10-10.5. And also can you make a video on how to do the nor cal tuck

bro i have chevy avalanche like your black one i do lots of hunting what tire size can i use for snow and mud

Amazing job guys!! Looks great!!

Do you think I could fit a 16x10 with 265/75 BFG ko2 on my 2wd with a 1 inch lift in the front?

would the same cutting apply for a 03 chevy silverado 2500hd stock hight with 33x12.5x18 on 18x9 with a 12mm offset?

Will this work with 22s? same tire size and offsets? looking to upgrade my 05 2500hd. Thanks

this is mean... awesome work. got me wanting to set my 99 up the exact same way

I have 2005 ford f350 4x4 and want to see if a 20x12 -44 offset on 33 inch tires will fit with stock suspension with no modification

What kind of headlight/floodlights are those and where'd you get them? I have a 01 Silverado, and have been looking around but haven't found anything I like yet, and those are sick

You all are doing some fantastic work buy my question to you all is. Would you actually put a light on your camera. The area your working on is dark.

I ran 37-13.50s on stock rims with a level kit and 2in spacers on my 2000 f150

I fit 20x10 -19 sprockets on a lowered 05 denali. Some inner fender plastic was sacrificed.

Hey man I did this, but I have 20 x10 and I also put 2 inch spacers and it runs really bad! I have a 3 inch level kit! And I've seen lower trucks the same way and it doesn't rub, you have any suggestions?

do the rims have to be -44s? would it have worked with -10/20? Nice job. Also, when you said only leveled....does that mean with different torsion keys or factory (cranked up all the way)?

Will this work with a rough country leveling kit on my 2005 Silverado with a 10 offset? I'm not very knowledgable in this field so I'm sorry in advance lol

I have a 07 gmc sierra 1500 z71. I don't have a leveling kit or lift. was wondering what is the widest tire and 18" Wheels I can put on it. I really like the look of the truck in this video, wanting something simmer to that wide if possible.

As far as leveling kit, is it a 3 inch or 2.5 inch and what size blocks in the rear?

Oh hell yea so this will fit on mine then! Definitely doing it!! I even have the same tires picked out lol

Could you heat up the rub-area of the washer fluid tank with a heat gun, and form it inward to create clearance?🤔

would you be able to fit 35s on the same truck with a 3in body lift?

Ok, so I have an 08 Avalanche. I'm going to buy 20x12 -44 Xd820 grenades with 285 or 295 Nitto 410 or Toyo proxes. And I'm tired of being told it can't be done. Can y'all recommend how to do it my self or a shop that won't tell me no in SA, Texas or south Texas.

Quik Q....if i did a 5" rought country level kit n did a cali tuck would i be able 2 fit 35x12.5r20????i have 20" fuel krank 0 offset & i plan on gettin a 2" wheel spacer kit also....thanks in advance

Where did you get those headlights? I’ve been looking all over but all the halo ones have bad ratings

can i fit 22x14 on 305 on a chevy silverado 2011 with a 2 inch lift/ leveling kit?

Looks clean, nice work!

thats pretty wild, Figured for mending the body id use body dollies and proper hammers, but yall got it cleaned up, but really how practical is it?

Might be a dumb question but how difficult is it to mount 20x12's on a 33x12.50?

Love the truck great job .. great vid..

The driver's side is the toughest side because of the wiper fluid tank.. I'm thinking about doing a 20x12 -24 on 33x12.5 xt atturros with no leveling kit

so they truck has nothing done to it such as lift? because I'm wanting to get some put on my 02 tahoe and it is not lifted.

I have the same truck what size is the rims and tires again? I want to make mines just like that.. looks tough!

nice ,got 99 silverado ,would like that setup. good work to

How about on a quadrasteer? Got any tips on that rear steer fitment?

If you put a 2-3" wheel spacers will it rub??

cool vid, quick and easy way to get that beast look.

nice bro!! does that go for a 2002 chevy tahoe too??I wouldn't like to do something like this..thanks

I would love to see what an 04 Tahoe would look like with this done to it.

How long did the norcal mod take and how far did you have to take it back?

man why you could have a shop in Houston love your work

just a idea. could you heat gun the washer bottle and reshape it to clear.

Can you guys make a video with these exact specs but on a 04-08 f150? I just ordered a 2.5 leveling kit and 33 Arturo tires with 20x12 moto metals and I'm worried this won't work on my ford.. Thanks custom offsets!!

This leveling kit is 1.5 front and 2.5 rear?

can you do it to a 1994 silverado with raised torsion bars?

What kind of head lights do you have in that truck.

Custom offset would -12 18" Fuel Krank or Fuel throttle wheels with 285/60-18 tires fit a 2001 Chevy suburban 1500 4x4 without rubbing up front. Thanks

Love those headlights

can u make a video of a 2012 f150 torsion bars and level the truck out bc I dont know were it is

How do you nor cal a 2wd 06 sierra for 20x12 -51 vision prowler

hope to put 20x14s on either 33s or 35s, I just have a 3 inch body lift on my OBS chevy might have to get keys

I have 34/12.50/20 nitto trail grapplers on my GMC Sierra 1500 and didn't do anything but turn my tortion bars up🤷🏽‍♂️ it only scrubbed on my shock plate with my wheels fully turned.

So with a leveling kit came with keys,shocks, and add a leaf bout 300 bucks i threw 2004 sierra 17" and 285 70 17 on my truck no cutting required so.........

I would love 2 see u do a 2003 suburban 1500 like you did this truck...

No need for spacers in the back or front?

I put 34's on a still slightly raked 02' Avalanche. They said I couldn't do more than 33's, especially on a cladded Avy. Next I'll try 35's and leveled. And a hammer. Lol

What size leveling kit is it 1.5 or 2 in leveling kit

awesome. thanks we are about to do this to my 2012 2500 35s on just leveled

@A2Nastyy

7 жыл бұрын

ty petersen tbh i have a 2010 i bought 35s/12.50/17 nitto trail grapplers on a 3.5 inch lift and i had to go down to 295/70/17 which is pretty much 34s bc the rub on both front fenders but the back part was bad!! and it was trouble trying to cut it bc u had to cut into frame.. so for 35s i prefer u get a bigger lift or go down to 33s or 295/70

quick question is the truck a 2wd or 4wd?

what size is the leveling kit on the truck?

nice work brotha.

This is how I've been doin my trucks since my days at Colorado State U. Just finished a similar job on my 98 Suburban to fit 35 x 12.50s (315 75r16) on only 4" of lift. My 94 S10 has run 33s on just a 2" body lift for years. In the Rockies lifting your center of gravity can get you killed.

@rockymtnredneck4888

8 жыл бұрын

....slight rubbing is how you know you've maxed out...now I'm thinking 37s should be what I put on the 'Burban as it stands now.

Could you do this with a 22x14 on a 91 Chevy k1500??

I have the Rough country keys up 2.5 inches and the Zone 1.5 inch body lift. Will there still be metal trimming? Or just the plastic valence on bumper?

@dustinpitre2278

7 жыл бұрын

+Custom Offsets is that based off a Mud Terrain 33x12.50 or any tire in that size?

im looking to buy the scorpion sc19 20x12 wheel. i want to buy toyo open country at2 extreme and want the same exact tire look as this. should i get the 285/55 to achieve the look in this video?

@imayhaveadhd

7 жыл бұрын

Custom Offsets i noticed you have two options for "open country at2" on the drop down menu when i click "tire model". which would be the extreme version? if you could send the link from your page, i would like to purchse asap!

you guys have my attention

Dude where you guys at, i have the same 2000 chevy silverado ext cab n step side

I fit 35x12.5 with 20x9 rims +0 offset with stock keys cranked all the way out. Got full crank and I did way less trimming than they did, just trim bumper and the plastic wheel wells with the bottom metal lip bent back lmao, talk about tucked

@HoboAttak

7 жыл бұрын

Custom Offsets I like this look a bit better, mine was pretty much flush and stuffed as hell 😂

what size tire should I be able to run, when I put a 3in leveling front lift kit on my 95 GMC 2wd?

@bubbawayne6734

7 жыл бұрын

thanks

I missed 1 crucial point.... Was that a 4x2 or 4x4?

for a 08 silverado 1500 what would fit better with just a front level kit 20x10 or 20x12 moto metal 962 n what tire size would give it a better look ?

@979tx7

8 жыл бұрын

Thanks for the quick reply bro so on the 20x10 would i need to do some triming

i have 33's on my truck and its just leveled but they look so small compared to these

i have the same truck what would it cost to have it done