thank you for the wonderfully clear and easy way to finish the loom project, I love how easy you made it look!

I’m so happy I found your page!! I’ve always wondered how this was done. As a newbie, this is going to be extremely helpful.

@beadaholique

2 жыл бұрын

I'm so glad! Thank you for taking the time to watch)

@carolking7408

Жыл бұрын

Yummy 7)

At last! A technique that's simple, clean, and effective. What I've been scouring the Internet to find. Thank you deeply. So glad this is still posted years later.

Thank you so much! I’ve been doing mostly bead weaving these days, but I went ahead and dug my bead loom out of storage on a whim and this is super helpful!

@beadaholique

2 жыл бұрын

Taking an old tool of storage and figuring new ways to use it is such a good feel isn't it? Glad we could help!

I have always loved working with beads, thank you for improving my technique. I plan to watch every tutorial. Thanks so much!

I just bought these slide-ends and other end pieces too.. and only when I got them realized I didn’t know how to use them. 😳 Thank you lady ❤️

@beadaholique

3 жыл бұрын

Glad you found the perfect video for you then! Happy we could help!

this was a very helpful tutorial! i’ve been looking at different ways to finish off a bead loom piece, but this is definitely the best way i’ve found! thanks so much!

You tutorials are so benevolents and useful. Thank you!

Omg!!!Thank you for this amazing tutorial!!I do so many bracelets with my loom then trying to decide how to finish it!!Well I see this method it THE pay off!!THANX!!!

Can't thank you enough for showing this. Thank you! Now I can finish off my stuff from the 90s that are just lying around because I didn't know how to do this part :)

@beadaholique

7 жыл бұрын

We had the same reaction when we found these. The perfect answer to a decades old question.

@sheilaandblacky

7 жыл бұрын

thank you

@ThaMCE

7 жыл бұрын

HAHAHA OMG ME TOO!!!

I am quite the newbie and so glad that I found this page!!! Thank you for such clear and patient instructions!!

This is exactly what I needed! I love the neat finish of the slider clasp. I also love it that you use one of my most useful tools, the humble toothpick! Thank you!

@beadaholique

6 ай бұрын

The toothpick is the best!

Thanks, I just finished my first bracelet and was iffy about how to finish it off with the warp threads. So I'm glad to have a simple way to do that.

@beadaholique

3 жыл бұрын

Glad to help, we looked far and wide for this method before we found it so we're happy to be able to share it!

Thanks so much for your videos on how to do these kinds of pieces of artwork. They have been very helpful

That is amazing. I tried to burn it once, and the result was a dramatic collapse of my whole work!!!

@beadaholique

26 күн бұрын

Oh no! I hope this technique works for you. Please feel free to ask any questions that arise as you are doing it.

Thank you so much. This is so much easier and neater than what I was doing before

Thank you for a very easy Tutorial.....I needed to see how you finished off the ends. Loved the video...was so clear in learning this project.

Your tutorials are so easy,I learned how to make beaded bracelets without my first bead loom arriving,and when it came the bracelet was perfect!Thank you so much ❤

@beadaholique

Ай бұрын

You are very welcome!

Thank you. Learned so many things watching this video that I never thought of.

Thank you. This is a great alternative to the traditional tie off method. I might also add, it would be a good way to use up leftover beads on the very last rows on either side. That way you can save those beads, esp. if you prefer their colour to others, for another project, since they’ll be covered up and glued over anyhow.

@beadaholique

Жыл бұрын

Very good idea! I had never thought of that - thank you!

I just created my first 2 weave bracelets. Love it much better than any stitch I've done so far. I had a very dear friend who wanted an indian style beaded necklace at that time I didn't know how to however I told her I would find out how. I learned a little too late she passed away on me a year ago and everytime I look at the next pattern I would like to try or draw up my own design I think of her and it brings a tear to my eyes, she was more like a sister I would have loved to have had. Debbie you are always with me especially when I'm weaving. Love You Lady. I feel you with me when I am running my thread to and fro. Thank you for taking your time to create this video I never would have known how to finish my work w/o you, I would have held them in my need to finish box/drawer.

@beadaholique

9 ай бұрын

Thank you for sharing your story with us, very special indeed and I am sorry for your loss. I am glad you have enjoyed learning this technique and that it has such a special meaning. If you ever get stuck or have questions, please feel free to reach out.

Cannot wait to try this technique

I always wanted to know how to do this like you showed us today. Thank you so much!!!!

@beadaholique

7 жыл бұрын

Glad we could help! Thanks for watching!

I always wondered how that was done. Thank you so much!!! Very helpful!!

@beadaholique

3 жыл бұрын

It took us a long time to figure this out and find just the right sort of clasp, glad we could help spread the knowledge 😃

thank you so much, God bless you!

Grazie sei molto brava e precisa. Finalmente sono riuscita a finire il lavoro. Sei grande😘

Lovely! Great job I've been not able to find any of these kits!

très beau bracelet et les finitions sont impeccables...

Thank you very much for this tutorial!

Great video. Thank you!

I know this video is old, but I actually finished my first bead loom piece today and I had no idea how to finish it! This video was so helpful and clear, thank you very much for posting it!

@beadaholique

11 ай бұрын

You are so welcome!

Excellent technique for finishing the project, I love it 😍

@denisortiz3622

4 жыл бұрын

Como consigo esas ceradura hermoso

@Luzangelicaolguin

4 жыл бұрын

@@denisortiz3622 no se de donde escribes, pero en la cajita de information la Sra da los links donde se pueden encontrar. Tambien donde venden material para bisuteria puedes buscar

Excellent demo/tutorial - thank you so much.

Perfect dear!

Your work is absolutely beautiful !!!

@beadaholique

3 жыл бұрын

Thanks Sherene!

Thank you very much. Very clear!

Thank you Donna

Thank you so much. Very helpful tutorial. 🌹

That is beautiful bead work.

Ellerinizle sağlık çoook teşekkür ederim

Well done .

This'll be extraordinarily useful. Though while slightly unfortunate, the spaces between my warp threads and my seed beads (I usually use Size 10s and 11s) are too small, so there's usually deformation near the beginning. However, this'll definitely make my loom pieces much cleaner, even if I just want to do small badges over bracelets

beautiful work, thk you

Thank you very much! 😊

I literally hate warps thank you ,you made it so effortless.

Great tutorial about tying off the piece

@beadaholique

2 жыл бұрын

Thanks glad you found it useful!

I love the loom you made...That is bracelet right, how about for neck and head,I like something for head..can you do it?

Thank you so much!!! This is perfect!!

@beadaholique

3 жыл бұрын

Glad we could share it, this one of our favorite techniques

Thank you so much!

Thank you for sharing.

I loved it so much

@beadaholique

6 жыл бұрын

Thanks so much!

Exelente video. Muchas gracias. Saludos desde los ídolos Veracruz mexico

@beadaholique

5 жыл бұрын

De nada! Gracias por visitar nuestro canal!!

Cool loom!

@beadaholique

7 жыл бұрын

Thanks :) You can see more about the jewel loom on our site if you're interested www.beadaholique.com/beadalon-jewel-loom-kit-weave-necklaces-bracelets-and-more.html

I do it differently, after I remove the bracelet from the loom, I start pulling the strings from the sides so at the end I end up with a long string that I later will used on a different project.

It so amazing Masha Allah thank you so much

@pygmygiant

5 жыл бұрын

Assalamualaikum! (just using my one phrase I know since I never get a chance to use it)

Thanks very good

Tesekkurler cok ogreti bir vidyo olmus elinize saglik😊

😂Thank you your tutorial is very helpful

Nice👍👍

Great video

@beadaholique

3 жыл бұрын

Thanks!

It's nice

thx u inspired me to make a shop on etsy

@beadaholique

6 жыл бұрын

We are so happy to hear we inspired you! We wish you the best of luck! Don't stop creating!

@staceysholter5677

6 жыл бұрын

What is it? I'll check it out

@najmakimosa8306

6 жыл бұрын

A little bit of everything me too dear

Thank you so much for your video, I tried it your way, my beads came loose for the first row, and the knots didn't stay, I don't understand what I am doing wrong, I have tried to reinforce the first row by going through them 2 to 3 times, still the same problem when I take them off the loom, any help would definitely be appreciated. I love all the videos and the products you make. Your my hero.

@beadaholique

2 жыл бұрын

Hi Connie, sorry you're having trouble! What might be helpful is going back through the last two rows. The beads should be secured by the knots you will make with the warp threads. Also, a little dab of glue goes a long way.

Thank you‼️

@beadaholique

2 жыл бұрын

Glad we could help!

I have dexterity problems in my left hand which makes it hard to tie a knot in the thin thread. Does anyone have any suggestions on what I can do to help me tie them?

Your tutorials are easy to follow and very helpful. I am trying to loom the warp threads as you recommend but the needle won't fit through the tiny 11/0 beads. I'm afraid I am going to break a bead if I force it. Any suggestions?

@beadaholique

4 жыл бұрын

You may want to consider a thinner needle. If you are already using a size 11 needle, you could try a thinner needle, such as a size 12, 13 or 15. You can see the needles we have available in the following link: beadaholique.com/collections/jewelry-making-tools?_=pf&pf_t_product_type=0-Product-Type%3ABeading%20Needle&pf_v_brand=BeadSmith Thanks for watching.

wow 😍

I have tried beading many times and I get as far as getting all the beads on the loom but the only needles i find are too fragile to do any of the finishing work. Where do you buy your needles or what kind are they? The ones I have found are super fine, quite flexible and break if you breath too hard. BTW, you do great work, I will watch all of your videos!

عالیه❤❤❤

Thank you❤😂

Muy bueno

Thank you for the great video ☺️. I am wondering if I could use super glue for the knots? Thank you.

@beadaholique

3 жыл бұрын

Yes I think super glue would work well for this application

Hi, your videos are so very helpful. I've got some questions. Your beads are so perfect. Can you tell me what they are and what kind of thread you're using. Thank you. I'm a beginner.

@beadaholique

2 жыл бұрын

Sure thing. For beads we're using Toho 11/0 rounds, you can see the colors we carry here: beadaholique.com/collections/seed-beads?_=pf&pf_t_style=0-Style%3ARound&pf_v_brand=Toho&pf_t_size=0-Size%3A11%2F0 For thread we use Nymo in size D, you can find that from us here: beadaholique.com/collections/nymo?_=pf&pf_t_size=0-Size%3ASize%20D

could you do a tutorial of how to remove a bracelet like this and simple connect the two end instead of adding a clasp? I cannot find one, and have just finished reweaving a bracelet of mine that had no clasp (like it had no start/stop area)

@beadaholique

6 жыл бұрын

Thank you for the suggestion. Currently, we have this video: kzread.info/dash/bejne/rGdhm7OjaK7bgrQ.html

I love your tutorials. However, when I went to your website to look for a sliding clasps and you don't carry them? I was surprised considering your showing it in the video.

Thank you for the video. Can you please tell me how do you know which slider clasp to use? And your clasps work with the 11/0 round rocaille seed beads?

@beadaholique

2 жыл бұрын

This kit will include a 26mm wide clasp. We have these claps available in a few sizes, but we recommend measuring the width of your project to help select the right size clasp. These will work with 11/0 beads. Thanks so much!

Is there enough room in the tube to use a thicker cord such as micro c-lon with fewer rows and knots?

@beadaholique

7 жыл бұрын

There may be, but unfortunately I haven't tried it with that cord with them.

Helpful video! What size clasps are used in this project?

Wow! May have to use my loom again! Also, can you finish off peyote and brick beadwork this way? Do the tube clasps come in different sizes, size 8 beads, etc.? I always have problems judging how long to do my beading for a good fit! ❤️❤️

@beadaholique

5 жыл бұрын

Unfortunately, these won't work with peyote . You can use these instead : www.beadaholique.com/slide-tube-clasp-5-rings-strands-31mm-2-clasps-22k-gold-plated.html . Yes, these are available in a few different sizes you can find them here: www.beadaholique.com/wsearch/result/?type_id=&q=Beadalon%20Slide%20Connectors,%20with%20Extension%20Clasps%20for%20Multi-Strand%20Projects . Thanks for watching!

I could really use some help/advice. I want to make my husband a hat band for his cowboy hat. He has a couple already and they seem to be stretchy almost like there is elastic cord in them? Any advice on a size 11 bead where to get some kind of cord like that that hopefully wont break? Thank you!!

@louisaentsminger3751

6 жыл бұрын

Size 11 beads are pretty much the norm. Granted there are a lot of other sizes but when it come to using seed beads, size 11 is the most common. You can use stretchy cord but I don't use it bc I don't trust that it won't break. For attaching to the loom I use strong all-purpose sewing thread like dual duty plus in either tan or ivory & then .006 in or 0.15 mm beadalon wildfire thermally bonded bead weaving thread for the weaving itself. The dual duty is around $2 & the wildfire thread is about $4 both at walmart. As far as getting it to fit your hubby's hat, measure the circumference of the base of his hat & either do it exactly that length or use the leather she showed in another video to attach to each end & the strips to tie it around his hat so it's easy to get on & off of it & then he'll have some small leather tassels on it too. Anyway, hope this helps.

I think I will add plain beads on the first row so the first color will show.

Thank u for this! I just learned how to loom bead and was stuck at the end of what to do! Is there different size slider clasps or are they all the same size??

@beadaholique

Жыл бұрын

Thanks for watching! We are happy to confirm there are different sizes available. You can find them here: beadaholique.com/search?type=product&q=Beadalon+Slide+Connectors%2C+with+Extension+Clasps+for+Multi-Strand+Projects+

👍🏽 nice

@beadaholique

3 жыл бұрын

Thanks Shelley! Let us know if you have any questions, we've done a lot of work with this loom technique over the years.

Poderia traduzir para português. Amei .

Hi, I absolutely love your designs and I got the looming down pretty good. But putting on the clasps is just not going well at all. I am not sure what I am doing wrong. Do you have any tips? Keep up the great videos. Love them! Greetings from Belgium!

Teşekkürler 👍💕💕👍

@beadaholique

3 жыл бұрын

You're welcome!

Seen videos that shows how to start but never completing..Thank you so much and it so helpful..Do have a question can you use monofilament fishing line?

@beadaholique

Ай бұрын

Hello! I am glad the video was helpful. What can I help you with for your question?

@meromena8184

Ай бұрын

@@beadaholique can you use monofilament fishing line? How to measure wrist to know how many beads to use?

Hello, your beads looks so even. The ones I bought from Michaels, some are bigger and others smaller, which make one row longer than others. Where do you buy your beads? Also I kept running out of thread when working with long hat bands. Any advice? Thank you in advance!

@beadaholique

4 жыл бұрын

Hi Leonardo, the beads we use for these loom projects are Toho 11/0 rounds, they're high quality Japanese seed beads. You can see our selection of them here on our website: beadaholique.com/collections/seed-beads?sort=created-descending&_=pf&pf_v_brand=Toho&pf_t_size=0-Size%3A11%2F0

Im going to have to get some slider clasps for mine, what other ways can you finish your loom work??? Can u make a video of other ways??

@beadaholique

3 жыл бұрын

Our loom playlist has one or two other ideas for finishing jewel loom pieces like this: kzread.info/head/PLdGWVJ-tb1bFe9VgdksRZ7H3MzQiffh5g

Where can I get seed beads and other items used in bead loom? I stay in India. Can u help me with any clue?

Why did my project end up rippled? Am I just butting them to tight or does it have something to do with the warp tension? Help please

@beadaholique

6 жыл бұрын

It sounds like too much tension.

I have a slight problem - I have a project that I want to turn into a bracelet, but the problem I have is that the bead strip is 30 mm - and the largest slider clasps I can find are about 26 mm. Does Beadalon have any in this width, or are there any other manufacturers who would make a slider clasp in the size I need?

@savvynsassy3335

6 жыл бұрын

Milady Blue I buy wider from ebay

Hi there! Can any of you help me please? How can I finish this bracelet without a clasp? Is there any video teaching an alternative technique? Here in Brazil we kind of strugle with good quality clasps, I thought os finishing with macrame, but honestly I don't know how to even begin. Thank you for sharing so much on your YT channel.

@beadaholique

2 жыл бұрын

Hi Isabela. The problem to solve will be how will you wear the bracelet without some kind of connector. Those long threads at the end could provide a solution if you can tie them to something or make a clasp of sorts from fabric and add that...you'll want to brainstorm a creative solution along those lines if a metal clasp is out of the question...

They look great. What sized beads did you use?

@beadaholique

Жыл бұрын

These kits use Toho beads in size 11/0. Here is a link to our 11/0 Toho beads: beadaholique.com/collections/seed-beads?_=pf&pf_t_seed_bead_size=Seed%20Bead%20Size%3A11%2F0&pf_st_availability=true&pf_v_brand=Toho

Can I use this tieing off method using 100% cotton Friendship thread and curved ribbon crimps !!

@beadaholique

6 жыл бұрын

Great question. Unfortunately since I have not used those two ingredients together in this technique, I can’t speak to whether or not it will work. Are you trying to loom with the friendship thread and how thick is it? My concern is that it might not go through the beads since you need to do multiple passes. If you want to send more details and maybe pictures to service@beadaholique.com, perhaps I can give you some better advice. Thanks!

ماهو نوع الخيط المستخدم ؟؟؟؟

This work need a lot of patience and i dont havr sucj thing

how do i tie them without that metal thingy

Hi I’m new to making jewellery and I’m keen to learn loom work!! What are the end findings called and where can I purchase them please. Sarah from Newmarket Suffolk uk 🇬🇧

@beadaholique

3 жыл бұрын

Those end findings are called slide connectors, you can see the model we used in gold here: beadaholique.com/products/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-26x5mm-1-set-gold And in silver here: beadaholique.com/products/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-26x5mm-1-set-silver

This looks so easy here the sliding of the clasp! It's been 30 minutes since I started trying to slide mine and I can't do it.

@beadaholique

Жыл бұрын

I'm sorry. Is it getting stuck on something? Please let me know and I will try to help.

@susanaescobedo1

Жыл бұрын

@@beadaholique thank you for your reply. I think it’s getting stuck on the knots.