How to Find brush piles on a lake with Side Imaging,Down Scan and 2D sonar using Gamin Electronics
Үй жануарлары мен аңдар
In this video I share my methods of using my electronics to fins brush on near lakes . I have been to this new area twice and I have already marked 12 different brush piles and I only spent about 4 hours total looking around .
I hope this video helps you to find your own brush .
If you want to contact me or send me something e-mail me at wildlifeadv@outlook.com
Proverbs 3:5-6. "Trust in the Lord with all your heart, and do not lean on your own understanding. In all your ways acknowledge him, and he will make straight your paths." The Good News: Put all of your faith and trust in the Lord and he will guide you down the right path in life, even in the most confusing of times
Brad’s Bait and tackle
bradstackle.com/
ACC Crappie Stix - The Ultimate Crappie Fishing Rods - Feel ...
acccrappiestix.com
Trolling Rods · Rod Tips · Shop Products · Jigging Rods · Casting Rods
acccrappiestix.com/
Hyco Lake Magazine - Serving Person County NC, Caswell ...
hycolakemagazine.com
If you want to contact me or send me something e-mail me at wildlifeadv@outlook.com
Пікірлер: 66
P.S. LOVE HOW YOU SHOW CLOSE UP PICTURES OF YOUR LIVE NOT RECORDED ELECTRONICS THAT YOU CAN ACTUALLY SEE! MOST OTHERS ON YOU TUBE YOU CAN'T SEE. UNDERSTAND THE GLARE, BUT YOU STILL DID A GREAT JOB FILMING IT WITH YOUR GO PRO. AND YOU EXPLAIN EVERYTHING SO CLEARLY. ANOTHER ATTRIBUTE LACKING ON YT! AGAIN, GREAT JOB!
Great info. Thank you for breaking everything down.
Really good video. Very helpful for those of us learning to read our graphs..
I just installed the same Garmin unit and this video was a huge help. Thank you for the very informative information.
@wildlifeadventures-13
3 жыл бұрын
Glad it helped
This is a Big Help, thank you.
When you hit the Mark button you are marking where the boat is currently located. To mark the location of the crosshairs hit the New Waypoint tab in the upper right hand corner.
Great video ❤
Thanks for the great info.
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzread.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Awesome video. Very good information. Keep em coming!
@wildlifeadventures-13
3 жыл бұрын
Thanks! Will do!
Great teaching sir
@wildlifeadventures-13
2 жыл бұрын
Thanks and welcome
AWESOME VIDEO! NEW SUBSCRIBER AND LOVE YOUR CHANNEL! WOULD LOVE TO SEE MORE OF THESE ELECTRONICS VIDEOS, INCLUDING LIVESCOPE. CAN'T LEARN ENOUGH ABOUT HOW TO USE THEM ALL TOGETHER TO FIND STRUCTURE AND FISH. GOD BLESS!
very good stuff.👍
great explanation of what you see on the bottom, thanks.
@wildlifeadventures-13
Жыл бұрын
Glad it was helpful!
I really appreciate the time you take to teach. I also have a Garmin 93sv and like it a lot, but there is still a lot for me to learn about it. I find plenty of brush on side and down view, but then I use Livescope to look for the fish. If I don't see any, I just move on. I subscribed and liked the video. Keep up the good work.
@wildlifeadventures-13
3 жыл бұрын
You are welcome.
@kevintatum5162
Жыл бұрын
@@wildlifeadventures-13[)))
Great video brother. Like ive said before a lot of good info im really enjoying your channel and the way you explain things... Thanks for sharing
@wildlifeadventures-13
3 жыл бұрын
I appreciate that!
I know how to read a graph been doing it for years even with the old bird flashers lol but I still like these vids still can learn something from everybody good info 👍
Very well done!!
@wildlifeadventures-13
3 жыл бұрын
Thanks'
Thanks for the info. Very good video.
@wildlifeadventures-13
3 жыл бұрын
Glad it was helpful!
Great video your exactly right finding good brush is 70 % of crappie fishing.
@wildlifeadventures-13
3 жыл бұрын
You got that right!
Really good video…..
So much help thank u for sharing. I subscribed
@wildlifeadventures-13
3 жыл бұрын
Thanks for the sub!
great video
@wildlifeadventures-13
2 жыл бұрын
Glad you enjoyed it
Great info vid ..one of the better ones I've seen on this subject ..A lot don't show as much detail on the screen on what you are looking at for identification .Afterall, if you don't know what's on the screen ......What's the point ...great job
@wildlifeadventures-13
3 жыл бұрын
That is a great comment . If you haven't seen this unit working you wont know what you are looking at . I'll do a video and try to show different structure and fish and break it down for others .
I have camped at long wood a lot . I really like that area of Biggs Island 😊
@wildlifeadventures-13
Жыл бұрын
Its a great place to fish.
Awesome Job! Will side imaging show fish in cat tails, lily pads or grass or all of them? Thanks 🙏
BOOM!!
Just can"t stay away from those BIG crappie on KERR! GRIZ
When you are looking at 2D is that looking directly down from the transducer? Just bought a Humminbird Helix 9 w side scan and am trying to learn a little. Thank you for the videos. Great help!!
Excellent information. I can get in a hurry because I want to catch crappie so bad. Then I end up not catching anything anyway due to impatience.
@wildlifeadventures-13
2 жыл бұрын
Yep, I know what you mean . Its really tough to find a big brush pile holding fish and ride on by to find another brush pile . I like to work an area and find 5-or 6 then fish the best one for 15-30 minutes then move on . Its different when I'm keeping fish ,if I'm catching fish I stay on em .
Boom
Nice crappie love to fish crappie when I visited the states for vacation and largemouth your content is astonishing I have been watching you for a little while now but I don’t think you have seen my videos yet I just caught my pb bass if you want to check it out 😊
Type of Garmin?
Thanks for the easy goin explanation. I get excited when I see structure like that on my unit lol.. same unit as yours. Do you mind saying what your sensitivity is on for down scan. Having a heck of a time telling whether I see fish or just a part of the cover. Thanks
@wildlifeadventures-13
3 жыл бұрын
set noise reject on "High"/ color gain 83-84/ regular gain 76 /TUG set to off / set bottom fill to on One think I did to get mine dials in was , when you know for a fact you are on fish I would move my setting till I achieved the appearance I was after . On a couple of occasion I have had to turn my gain down because there was so much silt in the water.
@Eyesofthasouth
3 жыл бұрын
@@wildlifeadventures-13 will give it a whirl. Thanks for the help!
hello and thanks for the great videos but i have a quick question how is it that you can see the creek channel so good what am i doing wrong or do you have a chip
@wildlifeadventures-13
2 жыл бұрын
I don't have a chip . The only thing i know for sure is , the larger your screen the more bottom detail you can see . If you are running a Garmin unit ,go into you setting and set is on 455 instead of 850 or 1200 , just depends on your unit . I can see better detail on my unit on the lower settings . I have a video on making those adjustment .
How do you make quick screens connected to numbers. That’s pretty neat
@wildlifeadventures-13
Жыл бұрын
Choose a screen you want to save. then hold the number button down for a few seconds and it should save it to that number.
I see the same thing on my helix 5 I think it's a big rock...
What is that small handheld camera - a GoPro?
@wildlifeadventures-13
6 ай бұрын
Yes, a Go-pro.
Great Video. I saw how you arranged your presets. Can you tell me how you were able to go so easily to split screen to show side scan on the left and Downview on the right? These are just the videos we all need. Thanks so much
@wildlifeadventures-13
2 жыл бұрын
The menu settings will give you split screen options. My screen is a 9" screen so I choose to use my 1-4 preset buttons to quickly switch between screens and keep the screen wide as possible .
Why are you not showing us how to go through the process of marking spots in side and down scan?
Instead of hitting mark, go to the top right and click waypoint when you have something marked. Hitting mark just marks the position of your boat. At least that's how mine is set up.
@wildlifeadventures-13
4 ай бұрын
10/4, I was new to the gamin unit back then>I need to do a new video and go back over it. Thanks
Awesome video, but we need to work on the way you pronounce crappie😀
@wildlifeadventures-13
3 жыл бұрын
Croppee!! I think y'all say it funny!!