How to fabricate pipe fence
Ойын-сауық
Buy merch here! 👉 meltinmetal.com
This skill could make you LOTS OF MONEY! Today I show you how to build pipe fence from a-z. This is one of the easier jobs to take in the welding and fabrication industry. I can usually build one of these in less than 45 minutes. Once you get a strategy down these pipe fences go up fast! If you can master this skill, you can make a entire living off of it.
Here’s all the lay out tools you need to fabricate pipe fence👇🏼
Pipe coping jig - amzn.to/3qkTppD
Pipe wrap- amzn.to/3qlRX6x
Chalk line- amzn.to/3qsH56X
Bocomal FR shirts- amzn.to/3IVcQMr
Optrel Panoramaxx CLT Crystal Welding Helmet - www.amazon.com/dp/B08L6SNW83/...
Here’s my Instagram- meltinmetal...
Пікірлер: 120
You know you are a welder when you try to make the fence in the middle of nowhere pretty 😂
@MeltinMetalAnthony
Жыл бұрын
🤣🤣
@All-things-shitbox
Жыл бұрын
Gotta take pride in your work no matter where it’s at
@derrickevans1758
3 ай бұрын
Facts lol
Ive said it before in your videos. Safety- even the helper had a hood, welding gloves, and face shield. Props to you for showing her the way, only way youre going to learn things like this. Thank you for sharing your videos, Las Vegas, NV over n out.
@MeltinMetalAnthony
Жыл бұрын
I do use a dead man with no gaurd. She isn’t allowed to use that grinder.
@joeyfisher2625
Жыл бұрын
Stepping stones- know your limits. Thx again
Afternoon fellow welders and fabricators.
@mrjv750li
Жыл бұрын
And truck drivers
@Gmac.556
Жыл бұрын
And plumbers ? lol idk what I’m doing. Here
@weldernotmechanic8588
Жыл бұрын
Cheerio
@natenate2280
Ай бұрын
@@mrjv750lilets just leave it at welders and fabricators
At the beginning of the year I broke out on my own and started a mobile welding business, I watched your videos to help me out and still watch them. Good stuff man keep doing you!
Awsome to see a hark working woman out in the field
Rock on, Anthony!! Just ordered some merch!. Just wanted to show some appreciation for the skills i've learned from you, and say thanks.
You got me bro, this video was so happy and upbeat. You did the ending and I was like "where's the gfys"
@MeltinMetalAnthony
Жыл бұрын
Lol 😂
Those are the prettiest welds I've ever seen on a pipe fence! Nice work
good job Anthony, thanks for share the video, best regards from Venezuela
teach your sister sister all you can she will always have a job smart brother
It is always Great to see your Channel. Taking time to teach and show your craft to a Family member and teach her a skill and a great trade is awesome. It is always fun and learning with you sir. Keep that Hot steel going and Again Great Show.
really great concise video, cool to see you rocking the optrel, I have a panoramaxx 2.5 that i love
@MeltinMetalAnthony
Жыл бұрын
Great hood!
Love it keep it up Antony
Love the video! Very helpful as I'm new to building pipe fence.
That back drop is incredible
Nice video bro 🤘🤘
Nice! there’s a lot of money in pipe fence work down south and out west for sure !!
Been a big fan for a while man so just purchased a shirt from you. Could care less about the welder keep grinding man love the videos!! These videos definitely help push me to actually getting into welding at 34 and been in school sense last year. I know that’s not your preference but it works for my situation but anyway glad to help grow your biz man and can’t wait to see the finished house
@MeltinMetalAnthony
Жыл бұрын
Hey man we all have our path! Glad to hear you got into it!
Great video
Props how you're treating you're helper especially giving her a hoodie ect.... !!!!!
Nice to see the younger generation get into these trades is it a friend or some mr Anthony
HAHA Rockstar!!! love the ending! Fuc*in' awesome you are passing your skills onto a trainee!! Great stuff as usual.
@MeltinMetalAnthony
Жыл бұрын
Thanks brother!!!
Great video looking good and cool you’ve got some help 👍👍
@MeltinMetalAnthony
Жыл бұрын
Thanks brother
Just picked up my merch! Good luck everyone!!
Thanks for posting video.
Will last longer than wood fence and less likely to be knocked down. Love it
I hit like when I see another video from Anthony, good job man
@MeltinMetalAnthony
Жыл бұрын
Thanks brother
I love your outro
God I love the sound of torch cutting pipe!
Cool video
@weldernotmechanic8588
Жыл бұрын
Ya 😊
I SEE THEM GAINS! 💪🏼
@1nvisible1
Жыл бұрын
*No doubt, my man's been hitting the iron (without an angle grinder)!!!*
@MeltinMetalAnthony
Жыл бұрын
🤣🇺🇸
Love the ending part 😂 👍😂
The WG Brister voice coming in with the commentary 😂
Nice looking results! I'm curious why you didn't use your mag drill with a cutting attachment to cut the saddles? I built a firewood rack with 2 3/8" pipe and I now have great admiration for those who can make nice looking saddle welds on pipe. It was the first time I had ever tried to do it and it was a lot harder than I expected.
@bedjoints
Жыл бұрын
You would need a cutter twice the size of the stock, easier to jus blast it
Good sh1t dawg!! Keep burnin
Hell ya another good video I'm excited hope to win lol 🤣🤣 I got to wait to buy a hat and shirt tell I get this check but I'm happy to support you when I can love the videos and I when be sending you a par bar soon keep up the grind man
@MeltinMetalAnthony
Жыл бұрын
Thank you brother!
Babe wake up .. metal Anthony uploaded another video
Center line of pipe.... you can use the seam weld inside the pipe.
Do you mind me asking what's your level of welding education? Or what you would recommend getting?
What a fantastic 'office' 😅
Gimme that damn expensive sticker, then send that welder my way lol
What’s your fence doing on bosses lawn? Looks like you got yourself 20 more miles of that fence Cool Hand.😊
Excellent job, but steel must be dirt cheap in Montana unless you only plan to build an extremely short fence. Lol. Is this for your sister's horses? I think you could just enlarge it slightly. Cheers, and keep the good stuff coming.
@MeltinMetalAnthony
Жыл бұрын
It’s just a brace to pull barb wire on basically
Woulda loved to see pass 1 pass 2 then final to see the difference is cuz it looks like one good pass
Magnetic laser, make sure it runs vertically as well and you don’t need a tape measure of chalk line
Get you and emily some electronic hearing protection, its well worth the money over plugs or dead muffs. You don't need anything like a 300$ set of Sordins (I do lol, been wearing them in the shop for 2 years everyday for the entire day and no problems) but anything that has external microphones and internal speakers. Bedtime tinnitus no more. There are plugs that do a similar job but plugs are nasty.
I think I know where this is at I’m gonna see if it is 😂
Hey guys does anyone know if the Trailblazer 302 can run Aluminum Tig? Looking to buy a used one and want to know before I do
I just graduated a couple days ago from highschool, would you have any tips for a welder coming out of highschool. I just need any tips that could help out .
@Cptnbond
Жыл бұрын
Look up 'Making mistakes with Greg'; tons of excellent videos. Cheers.
@GKRTANKLINESLLC.
Жыл бұрын
Don’t be scared!!!
@donsmith9081
Жыл бұрын
Look into all the union building trades in your area, find out how much they make, when can they retire and how to become an apprentice.
@MeltinMetalAnthony
Жыл бұрын
Find someone like me looking for a apprentice if you can
coulda capped the tops
@MeltinMetalAnthony
Жыл бұрын
Wasn’t specd. You pick it I stick it
How you like that opteel helmet?🤌
Shit the welds look better then the ones a Disney 👍🏻
$18/foot for top rail pipe fence with no climb wire on it in az.
Wyoming or Montana?
😎👍
I assume you were using a "whip" welding technique? Is there a reason for doing that method on this project?
@MeltinMetalAnthony
Жыл бұрын
Just esthetics. Really no force will be put on these. I would’ve used 7018
hit the back 9 4 ya boy if ya dont like it well you know what 2 do...
who asked for the 3 piece of fence in the middle of nowhere and why xD
@guerillarice1129
Жыл бұрын
I think sometimes they do this in the middle of a barbed wire fence to give it some more rigidity, although usually I see wood rather than steel.
@strong40
Жыл бұрын
Maybe it's just to put a sign on next to the highway
@jimf1007
Жыл бұрын
I was wondering the same
@DIRTDUMMY1
Жыл бұрын
That's spaced accordingly to where they need to tie off their horse for rest... sounded legit, right?
@MeltinMetalAnthony
Жыл бұрын
💯
What welding technique is that ?
@MeltinMetalAnthony
Жыл бұрын
Just pause and whip
I can’t believe I just witnessed a man chalk line a pipe for saddles 😐
Why didn't you cope the posts and run the rail on top? Then you wouldn't need to call the posts. Just asking
Here’s merchandise website! - meltinmetal.com
Please 🙏 don’t you those words at the end. Everything on your videos are great but not the ending. Thanks I see your helper is using safety. Nice 👍
@MeltinMetalAnthony
Жыл бұрын
Always make sure she’s as safe as can be, me however 🤷♂️
Aint fuckin fair, no UK shipping 😅🇬🇧
Bro why not hawaii 😭😭😭 shit
I’m curious why you where like yanking or pulling when welding the pipe?
@MeltinMetalAnthony
Жыл бұрын
On the welding rod or the pipe? I was trying to level the pipe out
@evanfrucht
Жыл бұрын
I think he means the whip action you had going on. Ot hard to tell. Your technique with the stinger/ rod.
I hope I win
@MeltinMetalAnthony
Жыл бұрын
Me too!
I'm looking forward to winning the welder and you shipping it to 🇬🇧 or I suppose I could go f*** myself
A second and third pass on a pass pipe fence, could come on rookie
Bud get rid of that junk so called pip jig ant worth a dame trust me welding pip for years it doesn't work that good lol
Emily the new side chick Anthony?
@madonnagauthier7743
Жыл бұрын
Pretty sick thinking bro I am his wife and she is a young girl Right out of high school a lovely young woman wanting to learn the trade and as you know Anthony is a great teacher clean up your mind man she probably run welds around you by now Have some respect for the future of young professionals, especially women in the trade
@TotalWarChronicles
Жыл бұрын
@@madonnagauthier7743 You dont see it as a oppertunity for a threesome?
@tomf4547
Жыл бұрын
@@madonnagauthier7743 🤣
🤢🤢🤢 welds
Plumb up and down, level laying out
I need to get better at fitting