thank you , thank you thank you

BEST DEMO OF A MULTIMETER. THANKS.

Can it be used to measure electrical frequency from on an AC power system?

Would I blow the fuse if I measured DC amperage on something that could potentially be 100 amps or more? I'm cautiously guessing it would... If so, what product can I buy to measure much higher amperages?

We are having a hard time putting the battery in as it relies on shutting the cover and that doesn't seem to allow the battery to make contact to the terminals. Is this an old model, do you think?

So I checked the manual for this and can't figure out which setting to use for measuring capacitance? It has a symbol in the manual that is not on my meter so I have no clue which one to use. Any help would be appreciated.

@Mystikalrush

Ай бұрын

Did you ever figure how to read uF?

how do I test for AC voltage

What is setting labeled "out" for?

How do I set this meter for microfarad uF mode?

Was working great until I got error code H-1. Battery is not dead, does anyone know what is wrong and how can I fix it?

Is there a way to calibrate? Reading very high on voltage. Confirmed with a second meter.

@felixcat4346

4 жыл бұрын

Calibration requires changing the smd resistors on the circuit board.

Thanks for this video. I just got mine today from Amazon. When I put it on Continuity mode but seeing a OL display. Is this okay or do I need to reset the unit? Thanks in advance.

Does this measure DVC ? Looking to check my car battery. Thanks

@billallen7545

4 жыл бұрын

I've used this particular multimeter model to test my motorcycle battery (12V) so I imagine it will work with a car battery. Here is a link on this topic which might prove helpful. Cheers!

I have this meter. I'm wondering why the meter keeps showing 0.L. whenever I turn it on. It doesn't matter which setting the knob is at. The O.L. only goes away if I'm testing something. But once I stop checking whatever, the display reverts to O.L.

@EtekcityUSA

5 жыл бұрын

Hi T Glenn, O.L. means "Open Loop." Open Loop signifies that the meter is ready to test. That's all! Hope this helps! If you have any further questions, let us know!

@tglenn3121

5 жыл бұрын

@@EtekcityUSA Aha. Ok. Thank you for clarifying.

it.s very or identical with uni t ut33 series

Screens blank (dead). How do I change internal battery?

@billallen7545

4 жыл бұрын

Remove the soft plastic wrap which should expose the screws on the bottom-back of the unit. Remove the screws and slide off the back cover to expose the battery.

How do you measure amps

@EtekcityUSA

5 жыл бұрын

Hi Shanae, thank you for your comment. To measure amps, please see the following: 1. Turn the dial to "20mA" in the "A-" 2. Place the black lead to the LED lead that connects to the terminal strip. 3. Place thee RED lead from to the resistor lead that connects to the terminal strip 4. The measured value will be displayed. (you can lock in your reading by clicking on the HOLD buton). 5. When measuring is completed, remove the probes from the LED terminal strips. Hope this helps! If you have any further questions, please let us know. Our customer support team can be reached at support@etekcity.com.

I want to know how to change the bloody battery

@GishSteven

6 жыл бұрын

1. There are two screws on the back panel that you have to remove. 2. Prop out the plastic cover, it's easier to open than it looks. 3. You'll immediately see the 9V battery and should know what to do from then on.

@maryhart3929

6 жыл бұрын

me too POS just said -1 on the screen and nothing happens using it.

@inthekitchenwithmelissadoug

5 жыл бұрын

To replace the battery, slip the meter out of the red plastic outer shell. Then, remove screws on bottom and pull it apart.

@inthekitchenwithmelissadoug

5 жыл бұрын

Mary Hart open it up and replace the fuse and/or battery.

@badara1

4 жыл бұрын

very bad quality of screw, impossible to remove one of them!

Test my voltage ;)

You forgot the ampere function.

Created some basic electronics hands on activities using this meter and it works well kzread.info/head/PLUOaI24LpvQOhI-HmTUPK8hycjGd2ODmB

Mine came with a dead battery out of the box rip

@EtekcityUSA

4 жыл бұрын

Hi there! We would be happy to help you with your multimeter. Could you please contact our Support team via email at support@etekcity.com or by phone at (855) 686-3835. We will help take care of that for you!

@avocademy

4 жыл бұрын

@@EtekcityUSA lol I bought it new on ebay and already purchased a new 9V battery thanks anyway