HOW TO - EPOXY EDGES -Countertop Epoxy - Fix Epoxy Drips - Epoxy Tips and Tricks
Тәжірибелік нұсқаулар және стиль
Everything about Epoxy Edges with Countertop Epoxy! Levi demonstrates and answers common questions about Epoxy and Edges. In this video we cover techniques on coating edges, scraping drips, removing cured drips and much more!
0:10 Edge Coat
0:58 Applying Edge Coat
1:32 Hiding an Edge Seam
2:28 Pouring Epoxy Base Up to Edge
2:45 Breaking Surface Tension
4:00 Dirty Pour
4:10 Fixing Dirty Pour Edge
4:35 Adding Metallic Colors
5:28 Color and Edges
5:49 Chopping of the Stick
6:02 Veining
6:35 Torching
6:51 Alcohol on edge
7:12 Bubbles
7:55 Scrape Drips
8:55 How long before scraping
9:16 Using Alcohol to remove imperfections
9:57 Removing Cured Drips
10:21 Buffer for Removing Drips
11:10 Router for Removing Drips
12:15 Oscillating Tool for Removing Drips
13:14 Smaller Pieces for Removing Drips
Countertop Epoxy provides countertop epoxy kits to coat over existing countertops or new ones. Our products are all food safe, heat resistant, UV resistant, and scratch resistant, making this epoxy the best epoxy for countertops. This coating is also zero VOC so there will be no odor or toxic fumes when applying the product. At Countertop Epoxy, our goal is to provide our customers with the best support and guidance so their experience from start to finish with our products is always easy and enjoyable.
Get valuable hands-on experience with applying epoxy to countertops, floors, walls, outdoor surfaces, and more by joining us for an upcoming workshop.
👉 Register for a workshop: www.countertopepoxy.com/train...
👉 Check out more of our premium epoxy products: bit.ly/2Rb9lE6
👉 Visit our website: www.countertopepoxy.com
✍️ Countertop Epoxy Blog: bit.ly/2OuuSeK
Follow us on social media:
TikTok: @countertopepoxy
Instagram: @countertopepoxy
Gettr: @countertopepoxy
Facebook: @epoxycountertops
Twitter: @countertopepoxy
Pinterest: / countertope. .
Have a question? Leave us a comment below.
✉ Sign up for our email newsletter - bit.ly/2YTeqt9
-
CONTACT:
✉ Email our team: info@countertopepoxy.com
📞Call our office: 970.639.9338
Office Hours: M-F, 7am-6pm Mountain Time.
#countertopepoxy #epoxy #diy
Пікірлер: 39
I love how you offer clear, concise explanations for everything you do and WHY. Love this video!
Brilliant! Thats so much for the clear and accurate instructions, couldn’t be more helpful.
Awesome video. Thanks!
I love your technique
Nice bro! thank you for the tips. great video
This is what you call a super great job
Very nice sir 👌 good job 👏 👍 👌
Thank you so much! I have cured drips (I was too lazy about scraping after my pour) and sanding them down slowly was not working. I used the oscillating tool and vacuumed everything up and now have beautiful smooth edges. Thank you so much!
@CountertopEpoxy
Жыл бұрын
Awesome glad this helped!
@David-ke5on
Жыл бұрын
@@CountertopEpoxy Do you recommend using a 1/8 or 1/4 roundover bit on edges?
Hey Brother I love your vids, I have been buying from a different supplier but now that I have found you next time I will def use your product. I want to try the wall epoxy kit and see how things turn out. Waiting for warmer weather. ty for your service,
@CountertopEpoxy
2 жыл бұрын
Give us a call we would be happy to help and would love to see what project you’re working on!
You rock!!!
@CountertopEpoxy
2 жыл бұрын
🙏
Instant subscription to your channel
@CountertopEpoxy
Жыл бұрын
Thank you 🙏
@dirtypickle77
2 ай бұрын
@CountertopEpoxy I have a question, I did my first pour on a kitchen countertop. It was a lot to do in minutes. Somehow, in the shadows of the upper cabinet was a spot that I didn't spread the epoxy over, like an inch by 2-inch oval dibit that has nothing on it. Is there any way to fill this and sand it smooth? Even if the finish isn't perfect after. It's over black charcoal chips and under where it doesn't show to bad. A 2nd pour isn't an option right now
do you have like top coat to help more durability avoiding scratches?
@CountertopEpoxy
2 жыл бұрын
We do have a product for extra protection it is our FX Shield
Why if u messed up on the edges only. Is there a trick to doing only the edges without getting any on top
Why do you apply the FX edge to block colour? Is this to prevent wood bleed? Or to prevent excess drips? I’m doing a dresser so making sure I do this acutely. Thanks in advance for clarification.
@CountertopEpoxy
25 күн бұрын
We actually just stopped selling this. It was used as a precaution if the mix wasn't properly color blocked. It's not needed, so just be sure to do a "stick test" where you dip you mixing stick in and out if you can't see through it then you know you have color blocked correctly.
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
hey i did an epoxy job on my counter top that has routed round edges but it seems no matter what i do i end up with waves in the edges which is not the look i want to achieve i even sanded my first coat did a flood coat but after a little while it drips down and leave and uneven surface i also broke the surface tension and followed every possible steps what shoud i do?
@CountertopEpoxy
2 жыл бұрын
Sounds like a surface tension or heat issue. The goal is to give the edges enough Epoxy so it pours over the edges in a sheet. We often break surface tension more than once to ensure this. And we never apply heat to edges. Give us a call if you have questions 970-639-9338
Just moved into my new home and the prior owners had an epoxy done on the kitchen countertop but left so many drips along the edge and bottom of counter top, my question how can this be rectified? it is truly bothering me.
@CountertopEpoxy
2 жыл бұрын
Hey sorry to hear that! In the video jump to 9:57 for removing cured drips. Hope that helps if you have any other questions feel free to give our office a call 970-639-9338.
What would you do in case of unevenness on the edges and it's already cured? A hard sanding or try scraping it?
@CountertopEpoxy
Жыл бұрын
You could do some sanding. But so long as you break surface tension first prior to letting the epoxy pour over the edge you shouldn’t have any issues.
@CountertopEpoxy
Жыл бұрын
@@hendosia give our office a call and we can assist for the best approach.
@Young_Star
11 ай бұрын
I would always plan to do a clear flood coat over your color coat. This gives you a layer to sand even for uneven edges. You can also use the alcohol trick on a gloved hand to rub the clear coat smooth while it is still pliable.
Dremel and quick sander then you don’t have to flip your piece and takes about 10 Minutes for that larger size
How do I pour on a counter that has a raised curved edge.
@CountertopEpoxy
6 ай бұрын
We typically pour the raised part first and the countertop would then by rolled to meet the edge. If you have any questions feel free to call us 970-639-9338.
Hi I wish if you can give some tutorial from scratch will be help full and I will start using your products
@CountertopEpoxy
2 жыл бұрын
This video was aimed specifically for edges check out our page and playlist for other in depth content!
Does Amazon sell your products?
@CountertopEpoxy
Жыл бұрын
Hey not at this time. But you can find all our products on our website CountertopEpoxy.com
Congrats on your gender transition! Wow I can see the progression of your chest job here, looks way better now. Your female to male transition looks great! Congrats.