Yes…great job! Thank You!!

Great Job! Love your videos!

So its a preview of where its going. That is a Great Idea, Now I can stop ruining everything trying to hit it right the first time. Thanks so much

@laserengravingwithmatt

2 жыл бұрын

You’re welcome

To me this video doesn't really cover how to get the "frosty" look, more so how to verify the placement of the art work. Maybe I am missing something.....?

@laserengravingwithmatt

2 жыл бұрын

Speed power dithering dpi and 80 on the gray scale. You can go a little darker color and it won’t be as nice or faster speed. Best of luck!

Thanks a bunch, Matt 👍

@laserengravingwithmatt

2 жыл бұрын

You’re welcome and thanks for watching.

Love it!

@laserengravingwithmatt

2 жыл бұрын

Thanks

I like the frosty look❄️

@laserengravingwithmatt

Жыл бұрын

Thanks

Enjoyed the video Matt. . And very slick. So cool how that "Laaaaser" can do that.

@laserengravingwithmatt

2 жыл бұрын

Thanks Brian. I am liking this new editing software.

Blue tape saved my bacon when engraving a logo on champagne flutes. I had a round logo and forgot to allow for the curvature of the glass. My test on blue tape reminded me and saved having to replace the customer’s glasses.

@laserengravingwithmatt

2 жыл бұрын

That is awesome

So glad to see you again. Lol. The problem i have is trying to get the software on my china machine to do the same results. Another great video

@laserengravingwithmatt

2 жыл бұрын

Power up and slow speed.

Great video Matt. Question; did you use anything to prepare the glass with, like dish soap or anything else? If not why? I have seen many others use soap or something else to prep the glass. Dan C.

@laserengravingwithmatt

2 жыл бұрын

Good question Dan. No I do not. And that is next week’s video.

Very Awesome

@laserengravingwithmatt

2 жыл бұрын

Thanks

Great video Matt!! just out of curiousity, do you have a walk out basement? would like to setup my basement as a workshop but I don't think I'll be able to get a laser machine like your blue one down the stairs as its around 375lbs plus the weight of two guys bringing it down and the staircase holding the weight. Was wondering how you set the lasers up down there. Might have to use my garage but my basement has more room. Thanks!

@laserengravingwithmatt

2 жыл бұрын

Yes I do have a walk out.

I came to check out the glass engraving, now I’m headed to the laser on a mission to etch blue tape…

Matt. Not sure if others asked, have you tied etching reverse side and mirror image?

@laserengravingwithmatt

Жыл бұрын

Yes I have it works great

I work with a gravograph ls100ex 35 watt co2 laser machine. What settings do you recommend on whiskey glasses?

@laserengravingwithmatt

Жыл бұрын

I don’t know but on my thunder 100watt I use 600 speed and 60 power and out into focus to 2mm. Hope this helps

Hi, Matt I have a K40 Laser Machine, I am trying so badly to engrave on some glass award crest, but in any how nothing is engraving on it. Do you have any suggestion for me for any specification that I need to use?

@laserengravingwithmatt

Жыл бұрын

It should be able to do it. Are you going to fast. Glass needs slow speed and lots of power.

So I have a 45w C02 laser. I’m obviously going to run full power but what speed should I be using to start with?

@laserengravingwithmatt

Жыл бұрын

That all depends on the laser. Slow speeds are better

Your welcome

Wonder if its possible to create holes (empty space) inside glass? using some laser.

@laserengravingwithmatt

Жыл бұрын

I don’t believe so.

I have a 30 watt epilog laser and want to put a design on a bottle all the way around it. How do I do that? I am new to this.

@laserengravingwithmatt

10 ай бұрын

You have to measure the bottle and put those measurements as your page size. Then do a test run to make sure it works.

I run my glass at 2:50 speed and 45 power (90w co2 laser). I can only seem to get a gray looking image not frosty at all. If I reduce my settings the image hardly even shows up. Any advice on settings. Real numbers appreciated. Thanks so much!

@laserengravingwithmatt

2 жыл бұрын

Try 80 power. I do 100 power and 30 speed

@HBREC.

3 ай бұрын

300 speed 25 power light air assist 254 lpi and if you want result that stays very very nice not so frosty maybe but clean no chipping use brass with battery drill there is a video youtube also. I must say my first test and it did not miss it freaking nice, btw i used dish soap (fairy) just in case, later washed it clean. It came out very beautiful (90w reci tube and RMLaser)

@HBREC.

3 ай бұрын

@@laserengravingwithmatt i will try also these settings just to see what happens:)

Can this be done with a ortur laser master II 15watt?

@laserengravingwithmatt

2 жыл бұрын

I don’t know 🤷‍♂️

Having a problem getting my glass real frosty like yours i the video. Can you give me a couple of tips? Thanks.

@laserengravingwithmatt

5 ай бұрын

I don’t know what laser you have. I would try to focus in a little

@bigfranksworld

5 ай бұрын

@@laserengravingwithmatt I have an OMtech 80w. I just rewatched your settings for glass video again. And had asked you that same questions before, and you had answered it, but I must not have gotten a notification. Thanks Matt!

@laserengravingwithmatt

5 ай бұрын

👍

Oh my gosh neat so no paint . Can this be done on a 5W laser ? I thought you needed a medium.

@laserengravingwithmatt

3 күн бұрын

No

Why you don't make the glass black before engraving?

@laserengravingwithmatt

Ай бұрын

Why would I

Hey Matt- love the flag! Question for you about the dithering- (you're not the first person I've heard reference this and I can't figure it out) Using just a font on Lightburn and Thunder laser, how do I adjust the 'grayscale' or dithering? I cannot seem to find the answer anywhere. TIA!

@laserengravingwithmatt

5 ай бұрын

Hello and thanks. So this was done in my Epilog and that’s what Epilog uses. If I did it in my thunder laser it would be in the speed settings and you would adjust the line interval. I use 500 speed and 15 power and .08 LI and I like to focus in to 4mm to the object

@hbcountry495

5 ай бұрын

@@laserengravingwithmatt much appreciated! Will give it a try.

can i do this with a Ortur Laser Master 2? i have a 7w laser which came with it. (either 7w or 7v)

@laserengravingwithmatt

Жыл бұрын

I can but you would need a spray for glass

@joelmartinez2896

Жыл бұрын

@@laserengravingwithmatt you are awesome Matt, thank you for the reply super fast! What kind of spray would you recommend?

@laserengravingwithmatt

Жыл бұрын

I am not sure u would want to look that up. I have heard of people using cermark but that is expensive

Can you get the same "Frosty" look with your xtool D1?

@laserengravingwithmatt

2 жыл бұрын

You know I haven’t tried glass yet

@jlathem56

2 жыл бұрын

@@laserengravingwithmatt - I have been looking at the D1 and a few other diode models just so I can test the waters, so to speak. Have you heard about the 20W diode upgrade xTool has coming?

@laserengravingwithmatt

2 жыл бұрын

Yes I have

Where do you buy your sheets of glass?

@laserengravingwithmatt

Жыл бұрын

I got them from Amazon for a job. The ones in the video were left after the job.

@joshuadonner4875

Жыл бұрын

@@laserengravingwithmatt Thank you for the information. Love your videos

@laserengravingwithmatt

Жыл бұрын

No problem and thanks

So, I assume you can't do this with a 40w diode laser...?

@laserengravingwithmatt

Жыл бұрын

You can but you need a spray.

What were your final settings without the tape?

@laserengravingwithmatt

2 жыл бұрын

I use speed 30 and power 100 and 80 gray scale and Jarvis dithering.

@RickSwartwood

Жыл бұрын

@@laserengravingwithmatt - I'm just starting into glass - Two questions: what wattage is your laser in this video? Do you have a video on how to set up "80% grayscale"? Thank you in advance.

@laserengravingwithmatt

Жыл бұрын

60watt. It is in coreldraw like the 3rd from black I think

@ForeverandEverWoods

Жыл бұрын

@@laserengravingwithmatt thank you. Found it. Never realized that.

@colman2005

10 ай бұрын

​@@laserengravingwithmatthow many lines per inch?

And, if you’ve got a camera onboard you are one step closer without using tape.

All that primping...:-). Looking good!

@laserengravingwithmatt

2 жыл бұрын

Thanks

first you said power way up, 30$ speed. then you said speed as fast as would go and power low? which is it? I get it. you burned the glue to the glass that allowed the laser to etch on the second pass. clarify you speed plz!

@laserengravingwithmatt

Жыл бұрын

When you burn the glass just the glass is 30 speed hundred percent power. When you are etching the tape so you don’t burn the glass you would go 100% speed in 12% power. The tape is only used to make sure the etching is in the right spot.

@billieb

Жыл бұрын

@@laserengravingwithmatt Thanks. I will give it a try this morning.

Yeah, we all have lasers... 🙄

How to etch glass.... Step one: Have tens of thousands of dollars worth in laser equipment.

is just no hand made

Uh…. This is a centering vid.

@laserengravingwithmatt

2 жыл бұрын

Thanks

Bring the power down to 11 what??? watts? percent??... cmon man, finish your sentences..... so how much wattage did it finally take to engrave the flag onto that glass?

@laserengravingwithmatt

Жыл бұрын

Epilog goes by percentage so 11 is percent … Speed

I etch glass by hand I like the laser idea but there's no skill in it

@robertketch8508

25 күн бұрын

🤣yeah no skill at all mate, thats why he made a video....that I am watching to learn from...its a bit trickier than you might think.

@laserengravingwithmatt

22 күн бұрын

@robertketch8508 🤣😂