How to Embroider 4 SIDES of a HAT (3D Puff Front & Back)
Тәжірибелік нұсқаулар және стиль
Would you like to learn how to embroider ALL four sides of a six-panel cap while also incorporating a 3D puff effect? Then be sure to follow along with us as we create four Miami-inspired designs and take you step-by-step through the process of embroidering them on each side of a flat bill, six-paneled structured cap. You’ll learn what materials you’ll need, how to set it up in digitizing software, tips and tricks for creating a 3D puff effect, and proper hooping techniques to get a fully-covered, one-of-a-kind finished product that will fly off the shelves.
Check out this must-see tutorial on how to digitize a 3D puff design: • How to DIGITIZE 3D Puf... ]
Watch this video for more information on the 8-in-1 device and different cap embroidery hoops: • Best Hoops For Cap Emb...
Join the Ricoma newsletter for educational blogs, videos, and live webinars: info.ricoma.com/newsletter
To learn more, schedule a virtual demo today: ricoma.com/US/virtual-demo
Get our latest Ricoma embroidery KZread videos sent straight to your Facebook Messenger: manychat.com/l2/RiCOMA.us
To receive embroidery tips and techniques from seasoned pros and get free embroidery content and advice, join our Facebook group, Embroidery & Printing Business Help: / embroideryprintingbusi...
To learn more about our embroidery machines, visit our website: ricoma.com/US
00:00 Intro
01:10 Materials you’ll need
02:00 How to digitize
04:03 Proper hooping techniques
05:29 Embroidery process
05:51 3D puff effect
07:50 Back-side embroidery process
09:44 Finished cap
We begin by giving you a breakdown of all the materials you’ll need to embroider on all four sides of a flat bill, six-panel structured cap. From there, we’ll show you how to create a four-sided design efficiently in your digitizing software. For this project, we used Ricoma’s industry-leading Chroma Luxe software.
After that, it’s time to embroider our Miami-inspired cap. We’ll take you step-by-step through the entire process - from proper hooping techniques to how to properly embroider each side of the cap and achieve a 3D puff effect in your design. Along the way, you’ll learn all the tips and tricks to make sure your four-sided cap embroidery goes as smoothly as possible.
Пікірлер: 56
Which tips and tricks are YOU using to ensuring your 3D-Puff comes out great? Share below!
@Steves_Embroidery_Studio
Жыл бұрын
Is the cap hoop available in chroma inspire?
Well explained very helpful.
@ricomatv
28 күн бұрын
Glad it was helpful!
hey, I like how did you explain with arrows, thanks
Woww that came out great
@ricomatv
Жыл бұрын
Right? :)
That design is absolute 🔥
@ricomatv
Жыл бұрын
We totally agree!
Now this is a file that should be available for download🔥
@ricomatv
Жыл бұрын
We will be sure to add it in the future!
wow this is so dope! An embroidery machine might the next thing needed for the studio
@ricomatv
5 ай бұрын
We are here whenever you are ready! (: You can also submit a request to our team > info.ricoma.com/contact-us/o?Organic%3A%20Ongoing%20promotion&Organic
I just got a set of 8 in 1 Hoops! Am looking forward to using them! What speed are you stitching at? Nice video! Thanks!
@ricomatv
Жыл бұрын
Hi! we ran the cap at 650 spm in exception of the 3D Puff in which we ran that portion at 500 spm.
Great tutorial and design.
@ricomatv
Жыл бұрын
Many thanks! Hopefully we can see your masterpiece soon!
hello, nice tutorial! what kind of needle and thread do you use for the 3d effect? what density of point?
@ricomatv
Жыл бұрын
We used standard 75/11 needles and regular thread! We recommend embroidering at a slow speed when it comes to 3D puff.
Great video ...
@ricomatv
Жыл бұрын
Thank you for watching!
Are you guys coming to the ISS show in Atlantic City in March?
@ricomatv
Жыл бұрын
Hi there, we will not be a part of the ISS show. However, if you are near Las Vegas we will be attending Printing United!
I have the most recent version of chroma luxe but the cap hoop is not an option available. Where can I get this, please?
@ricomatv
Жыл бұрын
Hi there, can you please send the service team an email so they can help? service@ricoma.com
LOL at the "dale" in the beginning! Doesn't get more Miami than that!
@cubanian385
Жыл бұрын
Gotta stay strong to the roots Jay! 🤣
Do you sell any of your digitized designs? I'm looking for a smaller puff font for the back of hats (Like in this video).
@ricomatv
Жыл бұрын
Hi there! We don't have this exact design for sale, but we are currently working towards adding more designs to Hoopmade ----> hoopmade.com/
Question: How close to the bill can you embroider on a ricoma machine? The placement on both front and side logos seem to high to me. Thanks in advance.
@ricomatv
Жыл бұрын
Hi! We recommend reaching out to customer service so they can give you some tips/tricks to help you! ---> service@ricoma.com
@cutformllc3451
Жыл бұрын
Typically there's a manual setting on the machine that automatically limits how low you can go but you can turn that off. You must have confidence you won't hit the frame. I don't below .5" from the brim on my machine personally and all my designs look great. The guy in the video didn't pay much attention to positioning the design properly but that wasn't really the point of the video
when I put my designs in the software its adding a running stitch witch throws off the center, can you explain how to add all three designs with out getting the running stitches?
@ricomatv
11 ай бұрын
Hi Sherry, we recommend reaching out to our customer service team so they can help > service@ricoma.com
Is the cap hoop available for inspire?
@ricomatv
Жыл бұрын
Hi there, were you referring to a Chroma tier?
How would u do this on an em1010?
@ricomatv
Жыл бұрын
Hi there! Check out this tutorial that was done by Allan Wade in which he accomplishes this ---->kzread.info/dash/bejne/dJOis6xuiKWbhtY.html
Can you provide digitizing for this design, can I change the R to a C?
@ricomatv
Жыл бұрын
Hi, at this time we don't have this file available, but we hope to have this available soon.
@constancebell454
Жыл бұрын
@@ricomatv thank you
Where do you get those hats?
@ricomatv
Жыл бұрын
Hi there, check out our approved wholesalers --->blog.ricoma.com/2019/06/06/top-10-wholesalers-for-all-of-your-embroidery-needs/
Why do you embroider below the puff? Is it necessary
@ricomatv
Жыл бұрын
Just a reference stitch, can do with or without
my drop down does not have a cap hoop option.
@ricomatv
22 күн бұрын
Hi there! Which tier do you have?
@rongriswold2652
20 күн бұрын
@@ricomatv Chroma Luxe
can i order customized 3D puff cap from you?
@ricomatv
10 ай бұрын
Hi there, we don't embroider and only sell our machines.
Chroma does not have a cap hoop setting. It has brother cap is the only option.
@ricomatv
Жыл бұрын
Hi Jacob, please send our customer service team an email so they can try to help! --->service@ricoma.com
Can you 3D Puff side of hats? Or what is Side of Hat Embroidery called?
@ricomatv
7 ай бұрын
You can do 3D Puff on the side of the cap!
the bill was messed up
@ricomatv
15 күн бұрын
Hi Rogelio! Thanks for your feedback.