Instructional video on how to elevate your Hunter's Comfort blind using our risers and 4x4 posts. www.hunterscomfortusa.com/Hunt...
Жүктеу.....
Пікірлер: 46
@toddcannady35924 жыл бұрын
Kelly you're correct. with the angle of the 4x4 post and the bracing it will stay in place while sitting it up
@salimuddin-tg2uk9 ай бұрын
This was easy to set up and I'm perfectly happy with how big it is. kzread.infoUgkxLQGtOO9dXIsNktEeycGoIT6jtJJNTScA The main front 2 windows are a nice addition with the quiet drop down or up hooks. The center is a zipper, and the outsides are Velcro, but in the center I can drop it to where I want it quietly. The side windows are Velcro, but I guess I get to see out and nothing can see in. To everyone complaining about the door, it's perfect. It's a quiet entry door. One snap buckle and 4 snap on pole ends. Plenty of room for my 12 Guage to maneuver around. I'm quite happy with it.
@hunterscomfort59548 жыл бұрын
Thanks Whitenton, it really is simple. The key is the bracing. We sell our risers at $110.00 per set of 4.
@mr_grow_4205
Жыл бұрын
And it wont tip over in high winds?
@Larry3425166 жыл бұрын
Where can I buy the metal 4x4 leg holders at? Thanks for the video.
@curte7739 Жыл бұрын
I built an 8-ft high platform with a 5x5x6 ft tall box on top of it a couple years ago I used a chain and my truck to stand it up using this technique. The biggest worry was once it stood up would it flop on over the other way on its side, no worries though I made the stance wide enough when it flipped over on its legs it stayed.
@stephaniesclassroom7775 Жыл бұрын
Do you have a list of materials including fasteners and tools?
@mcrout18 жыл бұрын
Whats the price for the risers?
@richman613 жыл бұрын
Awesome!
@larryreese61464 жыл бұрын
How high can it be elevated if a person had pulleys or some other means? Would it be safe at 20 feet?
@stevenkiesiner29954 жыл бұрын
What did you use to put the risers on the 2x4, screws or bolts
@toddcannady3592
4 жыл бұрын
5/16 lag bolts 1 1/2" long
@stevenkiesiner2995
4 жыл бұрын
@@toddcannady3592 thank you
@rodsapyta70594 жыл бұрын
I need TWO for my Front yard.in Plant City Florida. ??$$
@duggiestone6 жыл бұрын
These boys need to learn what a cordless impact driver is.
@billcenne7262
4 жыл бұрын
agree. a cordless impact and a cordless circular saw really work slick!
@toddcannady35924 жыл бұрын
yes you would have to build your ladder or steps to enter the blind.
@Pope98763 жыл бұрын
Do you think you could walk up a blind on 10ft posts?
@JD-hy6yc
3 жыл бұрын
Sure with either enough man power or a pulley method using a tree branch
@Pope9876
3 жыл бұрын
@@JD-hy6yc took 4 of us, but we did it.
@jamesbernard66142 жыл бұрын
Just build 1 on 4 legs already planted in the ground You don't have to worry about the wind
@bakistvan8036 Жыл бұрын
Szuper!
@kellyk38894 жыл бұрын
You never put a screw in the 4x4's in the risers.
@MrSTOUT73
3 жыл бұрын
Did you watch to the end??
@coletonpowers66714 жыл бұрын
I have one question, how do you get up in the blind without a separate ladder
@ExploringCabinsandMines
4 жыл бұрын
dont be stupid stupid , duh now how do I shoot a deer ? you didn't tell us that part.
@davethompson3252
4 жыл бұрын
davetileguy You’re a friendly fella, aren’t you.
@ExploringCabinsandMines
4 жыл бұрын
@@davethompson3252 I don't do stupid.
@TrehanCreekOutdoors Жыл бұрын
Redneck method to elevate your box blind. Step 1: Chill a case of beer. Step 2: Invite several friends over. Step 3. Open beers and enjoy a couple. Step 4: Ask everyone to tilt the stand up while you video for You Tube. Step 5: Finish off the beers up in the stand.
@terrybeasley28986 жыл бұрын
6ft in the air....what if your going for 12 or 14 ft in the air? Wldnt be so easy.
@billcenne7262
4 жыл бұрын
why not? just have to be more careful standing it up.
@ExploringCabinsandMines
4 жыл бұрын
I put mine 50 feet up on 3 posts.
@dirtydish6642
3 жыл бұрын
put mine 76 feet up on 2 1/4 posts
@orlandoandfamilytv89503 жыл бұрын
Looks kinda cheap. Mine was heavy as fuck. I still can’t figure it out. I think I need a crane
@billcenne72624 жыл бұрын
wow, one hunting blind and a pickup load of lumber!
@chrisao19874 жыл бұрын
What the heck is the blind made out of looks like spray in wall foam insulation.
@garypeters97715 жыл бұрын
Don’t forget to cable that puppy down 🇺🇸🇺🇸🤠🇺🇸🇺🇸
@CABINDAD6 жыл бұрын
Don't worry about it blowing over? Set them posts in the ground.
@daylightintheswamp Жыл бұрын
The Egyptians used the same technique
@MikeJones-yf2xx6 жыл бұрын
110 That's a rip off! The steel don't cost that much. I'l weld up mine and save labor charge.
Пікірлер: 46
Kelly you're correct. with the angle of the 4x4 post and the bracing it will stay in place while sitting it up
This was easy to set up and I'm perfectly happy with how big it is. kzread.infoUgkxLQGtOO9dXIsNktEeycGoIT6jtJJNTScA The main front 2 windows are a nice addition with the quiet drop down or up hooks. The center is a zipper, and the outsides are Velcro, but in the center I can drop it to where I want it quietly. The side windows are Velcro, but I guess I get to see out and nothing can see in. To everyone complaining about the door, it's perfect. It's a quiet entry door. One snap buckle and 4 snap on pole ends. Plenty of room for my 12 Guage to maneuver around. I'm quite happy with it.
Thanks Whitenton, it really is simple. The key is the bracing. We sell our risers at $110.00 per set of 4.
@mr_grow_4205
Жыл бұрын
And it wont tip over in high winds?
Where can I buy the metal 4x4 leg holders at? Thanks for the video.
I built an 8-ft high platform with a 5x5x6 ft tall box on top of it a couple years ago I used a chain and my truck to stand it up using this technique. The biggest worry was once it stood up would it flop on over the other way on its side, no worries though I made the stance wide enough when it flipped over on its legs it stayed.
Do you have a list of materials including fasteners and tools?
Whats the price for the risers?
Awesome!
How high can it be elevated if a person had pulleys or some other means? Would it be safe at 20 feet?
What did you use to put the risers on the 2x4, screws or bolts
@toddcannady3592
4 жыл бұрын
5/16 lag bolts 1 1/2" long
@stevenkiesiner2995
4 жыл бұрын
@@toddcannady3592 thank you
I need TWO for my Front yard.in Plant City Florida. ??$$
These boys need to learn what a cordless impact driver is.
@billcenne7262
4 жыл бұрын
agree. a cordless impact and a cordless circular saw really work slick!
yes you would have to build your ladder or steps to enter the blind.
Do you think you could walk up a blind on 10ft posts?
@JD-hy6yc
3 жыл бұрын
Sure with either enough man power or a pulley method using a tree branch
@Pope9876
3 жыл бұрын
@@JD-hy6yc took 4 of us, but we did it.
Just build 1 on 4 legs already planted in the ground You don't have to worry about the wind
Szuper!
You never put a screw in the 4x4's in the risers.
@MrSTOUT73
3 жыл бұрын
Did you watch to the end??
I have one question, how do you get up in the blind without a separate ladder
@ExploringCabinsandMines
4 жыл бұрын
dont be stupid stupid , duh now how do I shoot a deer ? you didn't tell us that part.
@davethompson3252
4 жыл бұрын
davetileguy You’re a friendly fella, aren’t you.
@ExploringCabinsandMines
4 жыл бұрын
@@davethompson3252 I don't do stupid.
Redneck method to elevate your box blind. Step 1: Chill a case of beer. Step 2: Invite several friends over. Step 3. Open beers and enjoy a couple. Step 4: Ask everyone to tilt the stand up while you video for You Tube. Step 5: Finish off the beers up in the stand.
6ft in the air....what if your going for 12 or 14 ft in the air? Wldnt be so easy.
@billcenne7262
4 жыл бұрын
why not? just have to be more careful standing it up.
@ExploringCabinsandMines
4 жыл бұрын
I put mine 50 feet up on 3 posts.
@dirtydish6642
3 жыл бұрын
put mine 76 feet up on 2 1/4 posts
Looks kinda cheap. Mine was heavy as fuck. I still can’t figure it out. I think I need a crane
wow, one hunting blind and a pickup load of lumber!
What the heck is the blind made out of looks like spray in wall foam insulation.
Don’t forget to cable that puppy down 🇺🇸🇺🇸🤠🇺🇸🇺🇸
Don't worry about it blowing over? Set them posts in the ground.
The Egyptians used the same technique
110 That's a rip off! The steel don't cost that much. I'l weld up mine and save labor charge.
@georgiareb55
5 жыл бұрын
Hush up boy!!!!
I can tell you never had to do hard work lol
Why not just use a helicopter?!