how to immobilizer off bosch edc15 ecu vw alh ecu immo off
Жүктеу.....
Пікірлер: 152
@caryfuk83 жыл бұрын
Vag comander have buttons for immo too, working ofcourse :D
@justme89564 ай бұрын
Vag commander has his own immo off Button, working like a charm , no need fo immo tool
@Morteexx2 жыл бұрын
I like how you trust your battery xD , I have bricked a ECU with pc turning off xD, I got lucky and got it recovery right after tho xD
@rubenmartin6234 Жыл бұрын
Top. It works perfect
@matyashorvath429510 ай бұрын
Any idea why I keep getting ,,Cannot reach device" whenever I try to read ECU eeprom? I tried blue KKL and K+CAN cable too. Seat Toledo mk2 2001
@eivindholthe5303 жыл бұрын
Thanks! :)
@hamzehabsh3 ай бұрын
Does it have to be a blue VAG KKL cable, or can i use any OBD to USB cable (for example Ross-Tech HEX-V2)
@benek72 жыл бұрын
can you please post a link with complete vag commander? that one which you posted have no .exe file
@theBdunklee Жыл бұрын
Do you have link for all the tools used?
@mkfourgli1 Жыл бұрын
Hey great video. Does this work on mk5 gti?
@sara781302 жыл бұрын
Thanks
@davispaul823 жыл бұрын
Does this only work with diesels cars or petrol cars also? Also were you able to compare to original file with immo on to the one with immo off to see where the immo off was written?
@ERAutomotive
3 жыл бұрын
Hey Yes you can immo off gas ecus as well procedure depends on which ecu And yea u can definitely look at the file with a hex editor and see where the changes were made
@davispaul82
3 жыл бұрын
@@ERAutomotive I really appreciate it and you video was very informative. keep up the good work and hope to see more videos from you
@moustaphacheva37577 ай бұрын
Cood 😊
@johnharding52512 жыл бұрын
Will this work with a B5 RS4? Have to remove cluster with KM for one with MPH but the new cluster doesn’t have immobilizer.
@ERAutomotive
2 жыл бұрын
Check this I believe your ecu is me 7 kzread.info/dash/bejne/nGRtm7RmZtfQYsY.html
@johnharding5251
2 жыл бұрын
@@ERAutomotive thanks. I don’t have that bench equipment. Wouldn’t get it in time if I ordered it. What if I found another cluster with immo and cloned the old one would that work
@ERAutomotive
2 жыл бұрын
Check out nefmoto They have a different method that uses the blue kkl cable
@theoffroader21063 жыл бұрын
Can this be done with the ECU still in the vehicle (via the OBDII port), or does the ECU have to be removed? Thanks.
@ERAutomotive
3 жыл бұрын
Can be done with ecu in the car
@danohara3032
2 жыл бұрын
@@ERAutomotive can you do this with VW Audi with vag commander on edc16 ?
@ERAutomotive
2 жыл бұрын
No
@andreamonastra66223 жыл бұрын
Great video! This software work with hex-v2 cable? I have also kess v2 and MPPS V16 can I read TDI ALH's eeprom with this tools? Thanks very much!
@ERAutomotive
3 жыл бұрын
I use blue kkl cable for this
@DominikWr
Жыл бұрын
hex-v2 not work it is on usb not com port. mpps v16 not work. i try on audi a3 8L.
@mrbowtieguy2 жыл бұрын
I cannot find the links in the comments?
@beardymcturbanhead41933 жыл бұрын
@ER Automotive Which driver did you use with the "Dumb" vag-com dongle ?
@ERAutomotive
3 жыл бұрын
I believe the one that installed with vcds lite Also the immo off button in vagtester works
@beardymcturbanhead4193
3 жыл бұрын
@@ERAutomotive Thanx, I couldn't get any version of VagTester to communicate with the ecu using both drivers (believe it doesn't open the port for some reason) ... I'll try using the Hex interface to see if it corrects the problem, tho the blue one does work with vag-com lite which technically should work with VagTester
@beardymcturbanhead4193
3 жыл бұрын
... and i did set up the port in the tester file
@ERAutomotive
3 жыл бұрын
That’s very strange
@beardymcturbanhead4193
3 жыл бұрын
@@ERAutomotive Thanks for reply and good tutorial btw... And yes, tried different versions I think v3.5 was coming up with port error (which i set to 4 where my com-port is set to) and the v2.5 said no response from ecu... Used K-Line as the protocol... I made a dual boot setup on the laptop so ill try first on Win XP instead of win7 maybe its something in the windows
@dashtyATG3 жыл бұрын
Hy thanks for your time. Is it ok to ask why they want you to do the immo of i understood immo stands for immobilizer but i don't fully understand what do you mean by immo of if you don't mind plz.
@ERAutomotive
3 жыл бұрын
Makes it easier to swap in a different ecu into the car Or for swaps since typically the swap car wouldn’t have the rest of the parts required for fully functioning immobilizer
@dashtyATG
3 жыл бұрын
@@ERAutomotive oh i see it now thank you How about the data on the old ECU? And I guess the car would start with out the transponder on the fob afterward right?
@ERAutomotive
3 жыл бұрын
Yes that’s right
@camouflagerecords19403 жыл бұрын
Hello how is the name from the obd2 tool? Do you have a link please to buy them? and the other question , how can i get this siftware to read the eeprom
@ERAutomotive
3 жыл бұрын
The cable is a blue kkl from eBay or Amazon Cheap cable less then 10$ And there’s a link in another comment for the software
@camouflagerecords1940
3 жыл бұрын
Thank you do you have a link for the cable please amazon or ebay and the edc15 edc16 cal i have but i need this software to read the eeprom i have a original ross tech vcds can i read with them and this Software
@ERAutomotive
3 жыл бұрын
Just a quick eBay search www.ebay.ca/itm/402812947205
@camouflagerecords1940
3 жыл бұрын
Thank you my friend very much but can i read the eeprom and write with the original ross tech vcds and this software?
@ERAutomotive
3 жыл бұрын
No
@robrobi7841 Жыл бұрын
Hi! Will this work on my audi tt 2001? I want to replace ecu and take off immo. Thanks
@ERAutomotive
Жыл бұрын
The gas engine ecu are different Check video on me7
@robrobi7841
Жыл бұрын
@@ERAutomotive i do have ktag but i dont have a eprom tool! What eprom tool u use? Where to find one? Thanks for help!
My car audi a3 2002. year was stolen. I found and returned the car, but now the immobilizer light flashes constantly. The car can start with any key. The immo light flashes all the time while the engine is running. How do I fix this?
@lennyhenriquez2811
3 жыл бұрын
I had that yesterday, but I tried programming 2 keys and only had one on hand. Once I tried again with 1 Key it went away. Try reprogramming the key.
@mikajones30182 жыл бұрын
Bosch EDC15C4 on freelander td4 can it work on this ecu?
@ERAutomotive
2 жыл бұрын
Not sure I’ve only done on vag cars
@elmacgyver9682 жыл бұрын
I turned immo off on my 2002 golf tdi, with this process. Engine starts and runs fine, but I now get a check engine light for engine block by immobilizer. Does anyone know what i have to do to fix my new problem? Has anyone experienced a check engine light for immo after immo off programming? Or do i just have to deal with the check engine light on all the time. If i erase the code it sets right back on the next start.
@ERAutomotive
2 жыл бұрын
Did U checksum ? Before writing
@elmacgyver968
2 жыл бұрын
@@ERAutomotive , I did. But i will try loading ariginal file again and retry process.
@elmacgyver968
2 жыл бұрын
I think my problem was the TCM loosing signal from the ECU when programming and the TCM was setting DTC's. Cleared all DTC's and test drove. So far so good. Thanks for the info.
@ERAutomotive
2 жыл бұрын
Yeah that makes sense Always clear codes after flashing
@hamzehabsh3 ай бұрын
Does this remove the "Immobilizer active" from the dashboard also? Car runs but the immobilizer active is still on the dashboard
@ERAutomotive
3 ай бұрын
If it’s the original cluster you won’t have that message If not original cluster Use dash dump edit to remove that message
@hamzehabsh
2 ай бұрын
@@ERAutomotive is that a program? Do u have a link to it
@christianbro23 жыл бұрын
Will this flash a light in the dashboard? And if it does, how do I remove it?
@ERAutomotive
3 жыл бұрын
No it doesn’t flash light on dash In my experience
@elmacgyver968
2 жыл бұрын
The immo will still be active in the instrument cluster and when it dosen't detect the right signal from the key the immo light will flash, but the ECU ignores the signal from the cluster and the engine stays running. Sorry no fix for the light. Other than covering it or removing the bulb.
@yigitaltug32713 жыл бұрын
I allready have bin file. I try to do immo off with edc 15. when I open the bin file with ec15 FIN and Immo parts emty, KM and Login 0(zero), Immo status ON. than I push Off and calccheck and save . The saved file is 0KB. What is the problem?
@ERAutomotive
3 жыл бұрын
Sounds like a bad read
@yigitaltug3271
3 жыл бұрын
@@ERAutomotive ı have 2 bin files. One is original , other is tuned stage 1 file. Both files read by tuning company. I tryed both files but result are same. 0KB
@ERAutomotive
3 жыл бұрын
That’s not the immobilizer file
@yigitaltug3271
3 жыл бұрын
@@ERAutomotive I didn't know they were two separate files. sorry. When I saw the bin extension, I thought it was a single file. I will try to read the immo file myself. thank you
@jacobstan3235 Жыл бұрын
Greetings… will this work with a Ross tech cable ? Also, will this program work on windows 10/11 ?
@ERAutomotive
Жыл бұрын
No won’t work with rosstech cable And yes to win11/10 whatever
@jacobstan3235
Жыл бұрын
@@ERAutomotive thanks. Got a blue one on the way.
@kimokimo56182 жыл бұрын
compatible with golf 5 year 2006 please?
@ERAutomotive
2 жыл бұрын
No Follow video for edc16
@charlychlonson8381 Жыл бұрын
Does this also work with EDC15VM+?
@ERAutomotive
Жыл бұрын
Yes And just use the immo button in vag commander
@monkeynts Жыл бұрын
This work with a 2003 jetta tdi?
@ERAutomotive
Жыл бұрын
Yes
@mikoajprusak4955 Жыл бұрын
Hi, can you tell me why cant you use the "Immo off" button instead? Thanks in advance for the answer
@ERAutomotive
Жыл бұрын
You certainly can and that’s now I do it now actually
@mikoajprusak4955
Жыл бұрын
Thanks man
@alhalex8501
8 ай бұрын
What do you mean? Just click immo off and it does it for you ?
@ERAutomotive
8 ай бұрын
@alhalex8501 when u open the program you will see
@alhalex8501
8 ай бұрын
@@ERAutomotive okay but not vcds with a hex v2 cable right ? That won’t work correct ?
@adamsorell48512 жыл бұрын
Software is for windows 10?
@ERAutomotive
2 жыл бұрын
I believe it’ll work yes
@joonasmuhli99183 жыл бұрын
what is the name of this software? can i get a link?
@ERAutomotive
3 жыл бұрын
Here’s a link drive.google.com/drive/folders/1XnmDSRGElb3rmOZna-2Nu0BbHpAaIn2Y
There is links in the comments One link is no good others work
@therose24443 жыл бұрын
So I can use this on a vw jetta gls 2.0l 2000
@ERAutomotive
3 жыл бұрын
No that’s not an edc15 in the 2.slow
@therose2444
3 жыл бұрын
So wat can I use
@ERAutomotive
3 жыл бұрын
kzread.info/dash/bejne/nGRtm7RmZtfQYsY.html This is one method There’s are others that can be found on nefmoto forum that use the cheap blue kkl cable
@gregyfeliciano93973 жыл бұрын
Will it work with VW caddy 2011?
@ERAutomotive
3 жыл бұрын
That has a different ecu And is a different procedure I haven’t personally done one
@Artegonit
2 жыл бұрын
@@ERAutomotive is this tutorial compatible with VW caddy 2006? It has immo 3. How to know if its EDC15 or EDC16?
@ERAutomotive
2 жыл бұрын
Depends on the ecu 2006 prob has ecu 16 So verify and follow the correct tutorial
@Artegonit
2 жыл бұрын
@@ERAutomotive how can i werify it?
@ERAutomotive
2 жыл бұрын
Easiest way is to look at ecu
@mahdiasle17922 жыл бұрын
i need to downlad this can you send the link in descreption
@ERAutomotive
2 жыл бұрын
mhhauto.com/Thread-vag-commander-for-kkl-cable
@kaarong Жыл бұрын
hi can you provide the link of the programs i dont see them i will appreciate
@ERAutomotive
Жыл бұрын
Can all be done in this software Just read And click immo off Then write mhhauto.com/Thread-Vag-commander-1-4-software-please
@kaarong
Жыл бұрын
@@ERAutomotive oh yes I have the vag commander I just need the other one edc15 I have one version but I been looking that one that you have
@ERAutomotive
Жыл бұрын
You don’t need edc15 calc Just use vag commander to turn off immo
@markshone46062 жыл бұрын
Is there any chance you can send me the software i have the cable
@ERAutomotive
2 жыл бұрын
mhhauto.com/Thread-vag-commander-for-kkl-cable
@markshone4606
2 жыл бұрын
@@ERAutomotive thankyou your a star
@markshone4606
2 жыл бұрын
Cant get the kkl cable work with it unfortunately as im on windows 10 ive lituraly bought mpps to read ecu and still cant unlock it lol pain in the ass
@ERAutomotive
2 жыл бұрын
Virtual machine or dual boot with windows 7
@markshone4606
2 жыл бұрын
@@ERAutomotive i tried dual booting with windows 7 it wnt install its being a pain any chance i can send u my ecu file and you unlock it for me im getting desperate
@Vitassrussu3 жыл бұрын
In Audi A4 B6 crypto not work
@ERAutomotive
3 жыл бұрын
What ecu?
@mikej2264
2 жыл бұрын
My B6 A4 1.8T is 8E0909518AF. Im told that it cant be done.
@ERAutomotive
2 жыл бұрын
It’s done differently then this video Follow me7 immo video It’s not as straightforward as edc15
@simonmolina37252 жыл бұрын
Thank you so much, can you provide links for the software
Пікірлер: 152
Vag comander have buttons for immo too, working ofcourse :D
Vag commander has his own immo off Button, working like a charm , no need fo immo tool
I like how you trust your battery xD , I have bricked a ECU with pc turning off xD, I got lucky and got it recovery right after tho xD
Top. It works perfect
Any idea why I keep getting ,,Cannot reach device" whenever I try to read ECU eeprom? I tried blue KKL and K+CAN cable too. Seat Toledo mk2 2001
Thanks! :)
Does it have to be a blue VAG KKL cable, or can i use any OBD to USB cable (for example Ross-Tech HEX-V2)
can you please post a link with complete vag commander? that one which you posted have no .exe file
Do you have link for all the tools used?
Hey great video. Does this work on mk5 gti?
Thanks
Does this only work with diesels cars or petrol cars also? Also were you able to compare to original file with immo on to the one with immo off to see where the immo off was written?
@ERAutomotive
3 жыл бұрын
Hey Yes you can immo off gas ecus as well procedure depends on which ecu And yea u can definitely look at the file with a hex editor and see where the changes were made
@davispaul82
3 жыл бұрын
@@ERAutomotive I really appreciate it and you video was very informative. keep up the good work and hope to see more videos from you
Cood 😊
Will this work with a B5 RS4? Have to remove cluster with KM for one with MPH but the new cluster doesn’t have immobilizer.
@ERAutomotive
2 жыл бұрын
Check this I believe your ecu is me 7 kzread.info/dash/bejne/nGRtm7RmZtfQYsY.html
@johnharding5251
2 жыл бұрын
@@ERAutomotive thanks. I don’t have that bench equipment. Wouldn’t get it in time if I ordered it. What if I found another cluster with immo and cloned the old one would that work
@ERAutomotive
2 жыл бұрын
Check out nefmoto They have a different method that uses the blue kkl cable
Can this be done with the ECU still in the vehicle (via the OBDII port), or does the ECU have to be removed? Thanks.
@ERAutomotive
3 жыл бұрын
Can be done with ecu in the car
@danohara3032
2 жыл бұрын
@@ERAutomotive can you do this with VW Audi with vag commander on edc16 ?
@ERAutomotive
2 жыл бұрын
No
Great video! This software work with hex-v2 cable? I have also kess v2 and MPPS V16 can I read TDI ALH's eeprom with this tools? Thanks very much!
@ERAutomotive
3 жыл бұрын
I use blue kkl cable for this
@DominikWr
Жыл бұрын
hex-v2 not work it is on usb not com port. mpps v16 not work. i try on audi a3 8L.
I cannot find the links in the comments?
@ER Automotive Which driver did you use with the "Dumb" vag-com dongle ?
@ERAutomotive
3 жыл бұрын
I believe the one that installed with vcds lite Also the immo off button in vagtester works
@beardymcturbanhead4193
3 жыл бұрын
@@ERAutomotive Thanx, I couldn't get any version of VagTester to communicate with the ecu using both drivers (believe it doesn't open the port for some reason) ... I'll try using the Hex interface to see if it corrects the problem, tho the blue one does work with vag-com lite which technically should work with VagTester
@beardymcturbanhead4193
3 жыл бұрын
... and i did set up the port in the tester file
@ERAutomotive
3 жыл бұрын
That’s very strange
@beardymcturbanhead4193
3 жыл бұрын
@@ERAutomotive Thanks for reply and good tutorial btw... And yes, tried different versions I think v3.5 was coming up with port error (which i set to 4 where my com-port is set to) and the v2.5 said no response from ecu... Used K-Line as the protocol... I made a dual boot setup on the laptop so ill try first on Win XP instead of win7 maybe its something in the windows
Hy thanks for your time. Is it ok to ask why they want you to do the immo of i understood immo stands for immobilizer but i don't fully understand what do you mean by immo of if you don't mind plz.
@ERAutomotive
3 жыл бұрын
Makes it easier to swap in a different ecu into the car Or for swaps since typically the swap car wouldn’t have the rest of the parts required for fully functioning immobilizer
@dashtyATG
3 жыл бұрын
@@ERAutomotive oh i see it now thank you How about the data on the old ECU? And I guess the car would start with out the transponder on the fob afterward right?
@ERAutomotive
3 жыл бұрын
Yes that’s right
Hello how is the name from the obd2 tool? Do you have a link please to buy them? and the other question , how can i get this siftware to read the eeprom
@ERAutomotive
3 жыл бұрын
The cable is a blue kkl from eBay or Amazon Cheap cable less then 10$ And there’s a link in another comment for the software
@camouflagerecords1940
3 жыл бұрын
Thank you do you have a link for the cable please amazon or ebay and the edc15 edc16 cal i have but i need this software to read the eeprom i have a original ross tech vcds can i read with them and this Software
@ERAutomotive
3 жыл бұрын
Just a quick eBay search www.ebay.ca/itm/402812947205
@camouflagerecords1940
3 жыл бұрын
Thank you my friend very much but can i read the eeprom and write with the original ross tech vcds and this software?
@ERAutomotive
3 жыл бұрын
No
Hi! Will this work on my audi tt 2001? I want to replace ecu and take off immo. Thanks
@ERAutomotive
Жыл бұрын
The gas engine ecu are different Check video on me7
@robrobi7841
Жыл бұрын
@@ERAutomotive i do have ktag but i dont have a eprom tool! What eprom tool u use? Where to find one? Thanks for help!
@ERAutomotive
Жыл бұрын
nefariousmotorsports.com/forum/index.php?topic=6134.0
My car audi a3 2002. year was stolen. I found and returned the car, but now the immobilizer light flashes constantly. The car can start with any key. The immo light flashes all the time while the engine is running. How do I fix this?
@lennyhenriquez2811
3 жыл бұрын
I had that yesterday, but I tried programming 2 keys and only had one on hand. Once I tried again with 1 Key it went away. Try reprogramming the key.
Bosch EDC15C4 on freelander td4 can it work on this ecu?
@ERAutomotive
2 жыл бұрын
Not sure I’ve only done on vag cars
I turned immo off on my 2002 golf tdi, with this process. Engine starts and runs fine, but I now get a check engine light for engine block by immobilizer. Does anyone know what i have to do to fix my new problem? Has anyone experienced a check engine light for immo after immo off programming? Or do i just have to deal with the check engine light on all the time. If i erase the code it sets right back on the next start.
@ERAutomotive
2 жыл бұрын
Did U checksum ? Before writing
@elmacgyver968
2 жыл бұрын
@@ERAutomotive , I did. But i will try loading ariginal file again and retry process.
@elmacgyver968
2 жыл бұрын
I think my problem was the TCM loosing signal from the ECU when programming and the TCM was setting DTC's. Cleared all DTC's and test drove. So far so good. Thanks for the info.
@ERAutomotive
2 жыл бұрын
Yeah that makes sense Always clear codes after flashing
Does this remove the "Immobilizer active" from the dashboard also? Car runs but the immobilizer active is still on the dashboard
@ERAutomotive
3 ай бұрын
If it’s the original cluster you won’t have that message If not original cluster Use dash dump edit to remove that message
@hamzehabsh
2 ай бұрын
@@ERAutomotive is that a program? Do u have a link to it
Will this flash a light in the dashboard? And if it does, how do I remove it?
@ERAutomotive
3 жыл бұрын
No it doesn’t flash light on dash In my experience
@elmacgyver968
2 жыл бұрын
The immo will still be active in the instrument cluster and when it dosen't detect the right signal from the key the immo light will flash, but the ECU ignores the signal from the cluster and the engine stays running. Sorry no fix for the light. Other than covering it or removing the bulb.
I allready have bin file. I try to do immo off with edc 15. when I open the bin file with ec15 FIN and Immo parts emty, KM and Login 0(zero), Immo status ON. than I push Off and calccheck and save . The saved file is 0KB. What is the problem?
@ERAutomotive
3 жыл бұрын
Sounds like a bad read
@yigitaltug3271
3 жыл бұрын
@@ERAutomotive ı have 2 bin files. One is original , other is tuned stage 1 file. Both files read by tuning company. I tryed both files but result are same. 0KB
@ERAutomotive
3 жыл бұрын
That’s not the immobilizer file
@yigitaltug3271
3 жыл бұрын
@@ERAutomotive I didn't know they were two separate files. sorry. When I saw the bin extension, I thought it was a single file. I will try to read the immo file myself. thank you
Greetings… will this work with a Ross tech cable ? Also, will this program work on windows 10/11 ?
@ERAutomotive
Жыл бұрын
No won’t work with rosstech cable And yes to win11/10 whatever
@jacobstan3235
Жыл бұрын
@@ERAutomotive thanks. Got a blue one on the way.
compatible with golf 5 year 2006 please?
@ERAutomotive
2 жыл бұрын
No Follow video for edc16
Does this also work with EDC15VM+?
@ERAutomotive
Жыл бұрын
Yes And just use the immo button in vag commander
This work with a 2003 jetta tdi?
@ERAutomotive
Жыл бұрын
Yes
Hi, can you tell me why cant you use the "Immo off" button instead? Thanks in advance for the answer
@ERAutomotive
Жыл бұрын
You certainly can and that’s now I do it now actually
@mikoajprusak4955
Жыл бұрын
Thanks man
@alhalex8501
8 ай бұрын
What do you mean? Just click immo off and it does it for you ?
@ERAutomotive
8 ай бұрын
@alhalex8501 when u open the program you will see
@alhalex8501
8 ай бұрын
@@ERAutomotive okay but not vcds with a hex v2 cable right ? That won’t work correct ?
Software is for windows 10?
@ERAutomotive
2 жыл бұрын
I believe it’ll work yes
what is the name of this software? can i get a link?
@ERAutomotive
3 жыл бұрын
Here’s a link drive.google.com/drive/folders/1XnmDSRGElb3rmOZna-2Nu0BbHpAaIn2Y
@tommyransom5029
3 жыл бұрын
By any change can you send me the download
@ERAutomotive
3 жыл бұрын
drive.google.com/drive/folders/1e_l_rkk6hnwobczYVlDrbZn9TepwYKpo
Where do I get the software? Thanks
@ERAutomotive
2 жыл бұрын
There is links in the comments One link is no good others work
So I can use this on a vw jetta gls 2.0l 2000
@ERAutomotive
3 жыл бұрын
No that’s not an edc15 in the 2.slow
@therose2444
3 жыл бұрын
So wat can I use
@ERAutomotive
3 жыл бұрын
kzread.info/dash/bejne/nGRtm7RmZtfQYsY.html This is one method There’s are others that can be found on nefmoto forum that use the cheap blue kkl cable
Will it work with VW caddy 2011?
@ERAutomotive
3 жыл бұрын
That has a different ecu And is a different procedure I haven’t personally done one
@Artegonit
2 жыл бұрын
@@ERAutomotive is this tutorial compatible with VW caddy 2006? It has immo 3. How to know if its EDC15 or EDC16?
@ERAutomotive
2 жыл бұрын
Depends on the ecu 2006 prob has ecu 16 So verify and follow the correct tutorial
@Artegonit
2 жыл бұрын
@@ERAutomotive how can i werify it?
@ERAutomotive
2 жыл бұрын
Easiest way is to look at ecu
i need to downlad this can you send the link in descreption
@ERAutomotive
2 жыл бұрын
mhhauto.com/Thread-vag-commander-for-kkl-cable
hi can you provide the link of the programs i dont see them i will appreciate
@ERAutomotive
Жыл бұрын
Can all be done in this software Just read And click immo off Then write mhhauto.com/Thread-Vag-commander-1-4-software-please
@kaarong
Жыл бұрын
@@ERAutomotive oh yes I have the vag commander I just need the other one edc15 I have one version but I been looking that one that you have
@ERAutomotive
Жыл бұрын
You don’t need edc15 calc Just use vag commander to turn off immo
Is there any chance you can send me the software i have the cable
@ERAutomotive
2 жыл бұрын
mhhauto.com/Thread-vag-commander-for-kkl-cable
@markshone4606
2 жыл бұрын
@@ERAutomotive thankyou your a star
@markshone4606
2 жыл бұрын
Cant get the kkl cable work with it unfortunately as im on windows 10 ive lituraly bought mpps to read ecu and still cant unlock it lol pain in the ass
@ERAutomotive
2 жыл бұрын
Virtual machine or dual boot with windows 7
@markshone4606
2 жыл бұрын
@@ERAutomotive i tried dual booting with windows 7 it wnt install its being a pain any chance i can send u my ecu file and you unlock it for me im getting desperate
In Audi A4 B6 crypto not work
@ERAutomotive
3 жыл бұрын
What ecu?
@mikej2264
2 жыл бұрын
My B6 A4 1.8T is 8E0909518AF. Im told that it cant be done.
@ERAutomotive
2 жыл бұрын
It’s done differently then this video Follow me7 immo video It’s not as straightforward as edc15
Thank you so much, can you provide links for the software
@ERAutomotive
2 жыл бұрын
Links are in the comments
@xPurpleZebraFTW
Жыл бұрын
@@ERAutomotive can you provide new links?
@ERAutomotive
Жыл бұрын
mhhauto.com/Thread-EDC15-EDC16-VAG-immo-off-software
@xPurpleZebraFTW
Жыл бұрын
@@ERAutomotive thank you
@xPurpleZebraFTW
Жыл бұрын
Do you have a link for your tuning software?
HI Bro link pls
@ERAutomotive
2 жыл бұрын
mhhauto.com/Thread-VAG-Commander-1-4?pid=2074949
Could i please get a download for the software? Everything im finding is fake and a virus.
Я все сделал как у ты но посе этого блок перестал выходить на связь.... Теперь ты болжен новый блок.....
Hello! Why is showing login code 65535 insted of real login code?
Do you have any download links for both?
@ERAutomotive
2 жыл бұрын
There are links in comments
@alvinpalacios-lopez7041
2 жыл бұрын
@@ERAutomotive I was only able to get edc15Calc, but the vag k can commander link doesn't have the program.
@ERAutomotive
2 жыл бұрын
There’s a few links Or search online it’s out there Also check www.mhhauto.com