No video
How to easily remove and install a new windshield
Kees had broken his own windscreen so today we had to replace it. We thought it might be a good idea to show you guys the process. The video has a slightly different setup as usual so I hope you guys like it!
Пікірлер: 67
Loved the 'enter car through windshield (mandatory)' part LOL. Got my thumbs up just for that line
Tip from experience roll ur windows down !!!! If u close the door with all the windows closed there is a possibility the the pressure build up will cause the windshield to actually pop out
@iziahchavez4040
Жыл бұрын
No definitely not
@JesusIsGoodTruth
Жыл бұрын
That makes no sense. You must’ve just installed it wrong. No car is pressure sealed like a plane is.
@jamie2546
Жыл бұрын
😂
Always make sure to follow all the instructions! Last time I forgot to enter the car through the windshield and the brand new windshield fell off of the car the next day!
@sl4983
9 ай бұрын
What???
Just wanna say that I'd bee on disability if I used a manual caulking gun! With around 800 windscreen replacements per year my best friend in the world is my Milwaukee M12 caulking gun! And a long blade for those parts where the window knife, or pull knife as we call it here is usually faster than a wire, unless you have a car, like some Skodas and Wolkswagens where the knife just won't fit then I use an Aegis Solo Cut 2 composite wire cutter. But those are personal preferences! All in all a very good video, and I snorted out loud about the mandatory "enter trough windshield"
My old 1999 Ford Taurus wagon I will attempt this because no one want to work with a salvage windshield. Window installers can’t find new windshield. Wish me luck.
Good work bro. it will help in my exam . ( Love from India )
Cheers lads, Confirmed what I suspected and took the daunting aspect out of doing my own
@YouTubeJunkieForTruth
8 ай бұрын
How'd it turn out?
What kind of glue?
When you said you "mask off the area" is it absolutely needed? As in if, later the material was snagged out on accident by say... a sun visor... Would it cause a leak with its absence? Asking for a friend...lol
what are they putting down when they say "mask off the area?"
Safelite or privately owned? What wouldyou do
What type of product would you use for a 70 nova front and rear glass?
Why is jonah hill replacing a windshield on a civic
Where do you buy the glass?
@monsieur-terpes
2 жыл бұрын
suggest local scrap yard or vehicle part out. Ebay is expensive but is last ditch best luck
@saucysuishi341
2 жыл бұрын
Junk yard. But most likely you can find people in your area that do it for around 100 used and 200 new. That how it’s down in Jax fla. don’t go to safe light. Moonlight glass and company.
@lastcent5140
Жыл бұрын
For anyone else looking for the same answer, automotive glass repair shops sometimes sell supply-only. Best of luck
@sl4983
9 ай бұрын
@@saucysuishi341what about Safelite?
But urethane is meant to adhere better to a small amount of old urethane, yes ?
gebruiken jullie die subaru justy nog? ik zou hem graag willen over kopen! mvg stan
@cpwtheman
6 жыл бұрын
stan versteeg momenteel geschorst. Hebben er weinig tijd voor helaas en waterpomp en radiateur zijn lek jammer genoeg
What urethane did he use? Can you provide a link please to one you recommend? Would this process be pretty much be the same for a side rear quarter window? Mine has just randomly fallen off my ford focus. It only appears to be held in place by the urethane.
@saucysuishi341
2 жыл бұрын
You would probably get away with just the black urathane and taping with painters tape so it doesn’t slide with setting.
Is it true that scratching the car is inevitable?
What does he use when it says mask the area
@miguelluna8728
3 жыл бұрын
@AJ Hauter thank you very much
Enter car thru windshield mandatory 🤣🤣
Does anyone know. How much its gonna cost to get new windshield on a 2006 Nissan Altima. Thanks
@trewten5579
3 жыл бұрын
I have a 06 camery and I just fixed it yesterday. Got quotes from $160 - $250.
@AdonisMediaProductions
3 жыл бұрын
@@trewten5579 that's not too bad. You fixed it yourself?
@Bibleguy89-uu3nr
3 жыл бұрын
I have a 2003 honda pilot, I need mine replaced too
@nachosilva3777
3 жыл бұрын
They charge my brother 250. For a altima. Its cheaper as i thought
@AdonisMediaProductions
3 жыл бұрын
@@nachosilva3777 thanks, that's good to know.
He kinda did ok. Best DIY video he must have did auto glass befor
So is DIY THAT cost effective?
@TheSevenSoulsofMan
2 жыл бұрын
Not really, the tools and glass cost for doing a job like this one will cost you just as much if not more than just to get it done professionally. It only takes us around 40 minutes to do a job like this and then the windshield has to sit for 30 mins before drive away. Most people have insurance for this stuff anyway.
@SuperDachshund
2 жыл бұрын
@@TheSevenSoulsofMan That’s what I figured. I looked into the tools and such. I will not be doing this DIY any time soon.
@foxfordcatguy2283
11 ай бұрын
@@TheSevenSoulsofManUnless, like me, you had the tools to cut the windows for years (stripped & scraped plenty of cars & also taken a few windows out in junkyards). You can get them for less than $10 at Harbor Freight. Bought a long knife for less than $20. I had a good windshield I cut out of another car years ago. For popular cars you can also get windows/windshields from restoration parts suppliers. Who doesn't own a chalk gun?!
@TheSevenSoulsofMan
11 ай бұрын
@foxfordcatguy2283 nah if they're using those tools to do the job from home for the first time unassisted, they're going to fuck it up pretty bad.
@hhunting_trolls9500
11 ай бұрын
@@TheSevenSoulsofManhow can you fuck it up per say?
What is this primer he's using??
@TheMidnightGarage
4 жыл бұрын
3m single step primer for windshields 😊
@aprillundgren5085
3 жыл бұрын
Is primer a necessity if so can you voice why
@TheMidnightGarage
3 жыл бұрын
@@aprillundgren5085 otherwise it will not attach properly
@riesa85
3 жыл бұрын
@@aprillundgren5085 every brand of p-u has its own primer! And the application method varies!
Goodd jhob
Okay that was some of the most annoying music ever! I didn't click on the video to be entertained, I wanted to learn. Irritating music doesn't do a thing for that.
The music is annoying.
@MedievalJourneyArt
2 жыл бұрын
I love it
Weetje iemand die een ruit kan plaatsen
No way it's as easy as that 🤷♂️
Seems like the easiest way to break into a car lol
Or just pay a proffesional
@thestickmanchannel8589
3 жыл бұрын
lol good idea because if im looking at diy I can afford a professional
@nowthen873
2 жыл бұрын
Why you watching this video then?
@murraymadness4674
Жыл бұрын
They want $365 to replace mine. I removed one at junkyard for $20, using $20 tool. Urethane is another $40.
@Kirbysbelt
Жыл бұрын
They have to pay labor, operating expenses, glass costs with freight etc, taxes, payroll taxes and try to turn a large profit so they'll stay in business. Glass is really expensive right now.
Thank