Happy it's narrated in English 👍

just got mine today already opened one great tiny tools

Hi, I bought the ECU extractor bolts. They are very good and works very well.

nice job mate!

Hi. Is it needed to add some thermal compound on the side with gray glue which is ised as heatsink before reasembly?

Lovely content! Keep it up!

My bosc ecu has a black turn knob on it for my focus i was wondering if you have any idea what it is used for

What drill press vice are you using there? :)

Thanks in advance idol..

Espetacular,super

Nice video

Hi, is there another video showcasing how to raise the circuit board out of the case.

How you close the ecu when job is done? new silicone?

If I need to replace it. And my car is VW Golf 5, 2.0 diesel. 2005 I have to find ECU only from specific cars like that?

good job. just I have a question. what is the grey paste top of rıght . is it termal cream for coolıng or some thıng glue . thank you

What is the thread size and pitch of the removal screws?

Wow, incredible...! So where can I buy that special screw...?? Let me know... plzzzzz

What do heat sinker. If dont contact properly when close didnt work?

hi i made purchase of extractor Bolts and it seems not to be compactible in opening Bosch Ecu for Mercedes models 273, 276, 278 how can one get the ones for such ECU models

Also you use a suction cup and heat

Nice videos sir

@TheOBDcompany

4 жыл бұрын

Hi Thank you For tools visit TheOBDshop.co.uk For training in the UK face to face theobdcompany.co.uk For online training visit AutomotiveEducation.online Thanks

Nice

Idol pls..I request the whole picture of the board coz I wanna know the value of burn resistor I've seen..

How much you can charge in UK for opening ECU? If i need that time like you i need stop do this JOB

Hello, could you send me a link for purchasing? Thanks

nice tool... thats what i need

Our video upload kijye ecm ic check pe

And what are you doing after flashing for close the ECU? Do you need to glue the edges of the ECU with new glue? And if yes, what kind of glue?

@TheOBDcompany

4 жыл бұрын

Please see below link. I use Wynn's black gasket maker. I hope this helps! www.eurocarparts.com/p/wynns-black-gasket-maker-200-ml-555770660?gclid=CjwKCAiA3abwBRBqEiwAKwICA-rEab6rHeb7tndyHIMNC4YtFnZPcffPl6Dn_c2gc2imO8zX2eANBBoCVX4QAvD_BwE

Ive tried multiple times to buy these things but there RMS processor refuses to let my card go through. So aggravating because I used to have a set of these and they really do work much better then anything else i've ever used

Kya ecu sa spret bdasakte

Не работает ссылка на болты. Можете повторить? Спасибо!

after removing the top lid, how do you remove the undercover to take out the whole PCB? Mine won't come out

@soundreamerbg

2 жыл бұрын

trying to figure out the same thing

@ketilreuschristensen7810

2 жыл бұрын

Did you find out??

@Jak0kaj

Жыл бұрын

Bump this. Has anyone managed to get the board out of the other side of the case?

instead HOT AIR, I use GLUE REMOVER around edges.... letting sit for few minutes and it comes off very easily...

@unifiedtechnologiessc

Ай бұрын

what type of glue remover you use?

Ordered over a week ago and still not here, could do worh faster posting and a.comfirmation email

Opened mine and it has little yellow rubber like melted in the joints . Weird

Nice job carried out,I am focusing on the learning courses regarding repair/programming/cloning(ref:your video at 15:58 .) please advise me,I am residing in UAE

@TheOBDcompany

4 жыл бұрын

We have online training available at AutomotiveEducation.online

How to call this screw name a?

Dude keep the can in vertical position when you are spraying.....

@Jpilgrim30

11 ай бұрын

I was screaming that in my head the whole time 😂

Do you have a point of contact where we can reach out I have a couple of question ? Website only shows a UK phone number which is not very convinient for international clients

@TheOBDcompany

2 жыл бұрын

Please WhatsApp us on +447936460285 Thanks

i cant fint it on the shop

@TheOBDcompany

7 жыл бұрын

Hello, Please find item in link below: www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts Any questions please feel free to message us. Thank you, Lewis

How do you remove the board from the heatsink case

@Jak0kaj

Жыл бұрын

FR. What’s actually holding the board to the other side? That black gasket tar?

@PepeeZeg

7 ай бұрын

kzread.info/dash/bejne/ZXWExqVrpbi1fKg.htmlsi=4u-3VKGIFywF9ycC

I usually leave in the freezer overnight that polyurethane will crack easy

After working on PCs a car ECU looks pretty simple compared to a PC motherboard.

@TheOBDcompany

4 жыл бұрын

Hi For tools visit TheOBDshop.co.uk For training in the UK face to face theobdcompany.co.uk For online training visit AutomotiveEducation.online Thanks

Ecu heat gun? Common its just a normal professional heat gun!

Same not on website

@TheOBDcompany

7 жыл бұрын

Hello, Please find item in link below: www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts Any questions please feel free to message us. Thank you, Lewis

I'm missing the reverse side... the most difficult one!

@PepeeZeg

7 ай бұрын

kzread.info/dash/bejne/ZXWExqVrpbi1fKg.htmlsi=4u-3VKGIFywF9ycC

Why open up a edc16u31 unit when they are obd compliant?

@adylol162005

5 жыл бұрын

lmfao...

@Allbbrz

5 жыл бұрын

100% of the people.. perhaps a few excetions... have no means whatsoever to service the microelectronics in an ECU, so most are just after saving $100 or $200 bucks with key reprogramming by swapping the EEPROMS .......

@TheOBDcompany

5 жыл бұрын

Ant C You could open a EDC16U31 ECU to clone the ECU via BDM. This can't be done via tools like KESS via OBD so you must open the ECU

ecm chik karne h

Hello, Please find item in link below: www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts Any questions please feel free to message us. Thank you, Lewis

17 minutes its easy

@TheOBDcompany

4 жыл бұрын

Hi For tools visit TheOBDshop.co.uk For training in the UK face to face theobdcompany.co.uk For online training visit AutomotiveEducation.online Thanks

Some people or you buddy? If you dont recommend why are you showing us?

I bet he already had that ecu opened because that looked just too eazy

فضلاعربي

Damn, that gasket is too narrow. The manufacturers should have more responsability to make it wider. The ECU's are very exposed to moisture.

ecu heat gun 😂😂