How to Easily Install Hydraulic Cylinder Rod Seal Using Seal Installer Tool
Тәжірибелік нұсқаулар және стиль
It can be really difficult to get the o-rings included in a packing kit to fit inside the grooves of the aluminum gland when rebuilding a hydraulic cylinder. The seals tend to be quite stiff and using only your fingers can make it hard to push the seal down inside the groove. This handy seal installer tool helps you twist the o-ring into a shape that is smaller than the inside of the aluminum end cap, then allows you to release the seal, which causes the seal to fold out into the inner groove. Typically you'll still need to work the seal edges completely into the groove with your fingertips, but that's pretty easy once the hard work of getting the seal itself into the groove is done.
Purchase Hydraulic Cylinder Seal Install Tool (size Small, 0.7" up to 1.187" size seals) here:
www.shortlineparts.com/seal-i...
Purchase Hydraulic Cylinder Seal Install Tool (size Medium, 1-3/16" up to 2.0" size seals) here:
www.shortlineparts.com/seal-i...
This o-ring installer tool works well with front end loader cylinders that have a shaft diameter of: 1-3/16” (a bit smaller than 1-1/4”) - 2.0”. The o-ring install tool can be used with any brand of front-end loader that uses an aluminum or steel gland nut end cap which has internal o-ring seal rod wipers. This tool can be used for replacing the seal kit parts on hydraulic cylinders used on these tractor front end farm loader brands: Westendorf loaders, Great Bend, Miller, Bush Hog, Farm King, Woods Equipment loaders, AgCo, AgCo Allis, Allied, Allis-Chalmers, Alo, Alo-Quicke, Quicke loaders, New Holland Loaders, Amacsa, American Econolift, Ansung, Arps, Artsway, Bradco, Branson, Buhler, Buhler Allied, Case-IH loaders, Challenger, Chief, Chillton, Davis, Dearborn, Deutz Allis, Deutz Fahr, DU-AL, Dunham Lehr, Ezee-On, Farmhand, Fendt, Ford, Freeman, Frey, Gnuse Mfg Co, Henry Equipment, Hesston, International, JI Case, John Deere loaders, KD, Kelley, Kelley Mfg Corp, Kioti, KMW, Kubota, Legend, Leon, Long, LS, Mahindra, Mailleux, Massey-Ferguson, McCormick, Memo, Midwestern Industries, MX, New Idea, Oliver, Paulson, Rhino, Schwartz, Sherwood Industries, Skyline Products, Stoll, Superior, Tas, Trima, Wallenstein, and White loaders.
This tool will help you install the o-ring replacement parts when rebuilding the hydraulic cylinders on your front end farm loader. It will help make the internal o-rings fit the right way inside the groove of the gland nut so that the cylinder does not leak after you reinstall all the parts. Seal kits that are crooked or not all the way in will cause a leaking hydraulic loader cylinder.
Пікірлер: 40
This video deserves an upvote AND a comment. A+ for keeping the video concise and to the point. It would be great if more KZread videos were like this!
@shortlinepartsllc6795
3 жыл бұрын
Thanks for the positive feedback Angelo! 😊
That first tool is why I came here. Thanks!
Thank you
i like that
will you have the seal pick set?
very gooooooooood
@shortlinepartsllc6795
3 жыл бұрын
Thanks for the feedback! 😊
Anyone else have problems installing rod seals with a seal twistor? Both of the (BRAND NEW) seals I had just crumbled apart the second I tried bending them at all.
where can i get the seal tools and is there a part number thanks
@shortlinepartsllc6795
3 жыл бұрын
Hi Thomas, here are the links for ordering: Small seal install tool, .7" - 1.187" seals, www.shortlineparts.com/seal-install-tool-small.html Medium seal install tool, 1-3/16" - 2" seals, www.shortlineparts.com/seal-install-tool-medium.html
The piston which car
hi
What is the name of that 4 sharp edge tools and where can I get it
@STXB24
2 жыл бұрын
Seal pick set
@avinashs7284
2 жыл бұрын
@@STXB24 thank you so much sir.. Even I'm a service engineer and I have been searching for this
@shortlinepartsllc6795
2 жыл бұрын
www.shortlineparts.com/seal-install-tool-medium.html
ماهي سهله
How much
@shortlinepartsllc6795
3 ай бұрын
Price is listed on website linked to below www.shortlineparts.com/seal-install-tool-medium.html
Om
Hasta las webas nk pasa nada
You have a voice, use it
You do not need that silly complicated tool to put a rod seal in. If the pressure seal is thicker than 8mm then soak in hot water for 5 minutes otherwise just squeeze in with your fingers. Do not use anything sharp!
@jefffrayer8238
Жыл бұрын
I placed the seals in hydraulic oil heated up in a very clean tuna fish can. When done oil goes in oil squirt can and not wasted. Go gently as possible make sure they're in right order and direction. Nice tool if doing this often.
@shaungutierrez9411
Жыл бұрын
@@jefffrayer8238 How do I know which direction to put in the "flared" side of the rod seal?
@brianb5779
Жыл бұрын
Rob I have a question. I see companies using grease for assembly. I also know hydraulic systems are very sensitive to just any grease. Do you know what kind of grease and are you also able to use petroleum jelly? My hydraulic system using ATF so i was curious on your input. Thanks
@robaustin245
Жыл бұрын
@@brianb5779 Silicone grease is the only type to use. But use sparingly. It's what we sell to our customers.
@brianb5779
Жыл бұрын
@Rob Austin Really appreciate the info and response Rob. I have a tube of pure silicone grease so ill try it. Thanks again