This is the second time I've referenced back to this video to drill into tile. Best video I've found.

@yourbeekeeper

6 күн бұрын

Thank you Kathy, Appreciate you stopping by. Hope you're having a great week.

He doesn't talk at all and demonstrate. I like it. Well-done

You’re the only video that took us through the drilling, anchors and screwing of tiling. I appreciate that. I didn’t think we needed anchors but it looks like I’m sadly WAY wrong. 😢

Thanks for watching! It's all about tapping the glazing away. I'm glad it helped you out.

This is the 7th or 8th tile drilling video that I've watched. It's the first one that led me to subscribe. Couldn't resist the "Finishing Move". Awesome!

so good to watch instructions without a long boring preamble. Thanks for a great job.

@yourbeekeeper

7 жыл бұрын

You are very welcome Christina. Have a great day.

Very helpful 👍 And thanks for sharing the brand info about your trusty drill. Simplifies the search for a durable tool. Very few think of specifying such useful details.

I was debating the different suggestions for successfully drilling through tile of a shower stall. Tried your technique on a scrap piece of tile and felt confident enough to give it a whirl on a customer's condo. Worked well!

@yourbeekeeper

8 жыл бұрын

+MrTontoYoder Great to hear! Thanks for the feedback, I am glad I could help you out.

the ending made me chuckle, tie fold and a satisfied tap on the roll for a job well done.. lol perfect instructions thanks for sharing

@yourbeekeeper

7 жыл бұрын

Thanks David, Glad I could help out.

@jasonelskamp2365

7 жыл бұрын

except it was backwords! LOL

Great tip, I knew about the tape but not the tapping of the drill with a hammer. I'd never drilled a hole in a tile before and with your help I managed 4 with no problems... Thanks for posting.

Excellent tutorial! Thank you very much for putting this out. My first time drilling into tile and it couldn't have gone any better thanks to your video.

@yourbeekeeper

7 жыл бұрын

That's great to hear Peter, Glad I could help out with your project.

Hey My Friend!!!!! Completely happy with Dewalt tools... Thanks for watching Mr. Fritz, I appreciate the great comment!

This worked great. Four holes in tile backsplash and no dramas. Thanks!

Thank you very much for this helpful video, I am a new home owner and I am learning constantly how to install and repair things around the house, it definitely saves money. Great video!!!

@yourbeekeeper

7 жыл бұрын

Thanks for watching Hans.

Thank you, years back when we just build our house I needed to learn this technique. I remember that always the drill bit slipped on the tile surface. Your method is excellent.

@yourbeekeeper

9 жыл бұрын

mogbaba Thank you.

Excellent video. Thanks for posting it. Used your method for mounting a grab bar in our bath tiled wall. But blocked it behind said tiles, with 2"x4" mounted between wall studs. Came out nice, strong, no tile damage. Thanks again.

@yourbeekeeper

7 жыл бұрын

You're very welcome, Thanks for the feedback.

Thanks for sharing your knowledge! By the way, nice finishing touches with the hotel corner garnishment on that roll.

Great tip for tapping the tile with hammer and drill bit - worked a treat. Thanks for uploading

@enzolucani3998

6 жыл бұрын

westfielder01 Battisti

ahhhh, the little touches that make the customers happy!!!!!

This is a great video. I love the fact that you tell us it is real time *and* it does not take long. About to try this out shortly after practising on some scrap. Will update you. Thanks again!

@yourbeekeeper

9 жыл бұрын

Nashib Qadri Glad I could help out. Please let me know how it went for you.

@NashibQadri

9 жыл бұрын

yourbeekeeper - It worked out really well. There were two very clean holes, level, without any cracking. Thanks!

I actually went aww for the last 20 seconds when you folded the towel! :)

@yourbeekeeper

10 жыл бұрын

It's all about customer service.

@carolschaubert3325

6 жыл бұрын

Kr Sa Hi nu nu Nubian nu

this brought tears to my eyes it was so beautiful- you sir, are an artist

@rotsennestor9255

4 жыл бұрын

hahaha

@RobertoHa-rt3gi

3 жыл бұрын

It's really a happy ending mate.. and some tissue for your joyful tears. 😁😁

This is the best one yet, especially the folding of the tissue at the end, brilliant. This is the method I will use, cheers.

@yourbeekeeper

7 жыл бұрын

Thanks George.

quiet, to the point, clear and fully understood -- thank you !

@yourbeekeeper

8 жыл бұрын

+August kruse-templer You're very welcome.

Thanks for the tip always used a tile drill to avoid the chipping but like what u did. 👏🍹

I had to put a heated towel rail up which required 6 holes in similar tiles in this clip, All I can say is it was the bet job I have ever made, all holes in the right place and right size, thanks for the tip, 100% thumbs up.

@yourbeekeeper

9 жыл бұрын

Barry Rutter Fantastic! Glad I could help out.

Great tip thanks a lot, saved the expense of buying another set of tile drill bits. I have also used your technique on tiles that have not yet been fitted, supported these tiles on a piece of 25mm thick rubber to absorb the shock.

@yourbeekeeper

9 жыл бұрын

Robert Higginson Great to hear it worked out. Thank you Robert, for the feedback.

It's the folding part I'm struggling with. Nice useful video, thanks.

real handy tip! it will save a lot of trouble. these days, we use diamond coated hole bit for the first ~1mm then use carbide tip masonry bit as you've shown.

Excellent. Thank you, I had wondered how one could stop the drill bit from sliding all over the ceramic tile. Very useful tip with the tap and using a ceramic drill bit to make the indent through the glazing. Anna

@yourbeekeeper

9 жыл бұрын

Anna Quek HI Anna. You might try making a deeper indent in the tile glaze when you are tapping. Remember it's a light tap while your rotate the masonary bit between your fingers...it allows that carbide tip to get fresh bites in the tile. I have not had any issue with the bit wandering.

Enjoyed the story on the drill and how easily you made it.

You never know when you will need this video Chief...Aloha!

Haha! You could be saving the world to that music. Love the fold at the end too. Thanks for posting! :-)

@yourbeekeeper

9 жыл бұрын

trickeyD Your very welcome. Glad you enjoyed it.

Thanks you. Very informative, especially the drill bit tapping to take off the glazing.

@yourbeekeeper

10 жыл бұрын

Your Welcome. Thanks for watching.

Very clear and easy to follow video. Thanks for posting

Thank you so much. This video was perfect. I had never done this and all the points and instructions were perfect.

@yourbeekeeper

9 жыл бұрын

You're very welcome Eric, Glad it helped out.

Your are very welcome. I hope it helped out.

Great video, quick and simple. Nice touch on the TP. Thanks.

@yourbeekeeper

3 жыл бұрын

Glad you liked it

I've been drilling ceramics wrong..LUCKY I FOUND THIS VIDEO..THANK YOU SIR..THUMBS UUUUIPPPP...FOLDING THE TIP OF TOILET PAPER..WOW!

Magnífico trabajo maestro

Very nicely done! Great!

Thanks for the info. Installing a range hood in the kitchen. This will really help!

@yourbeekeeper

3 жыл бұрын

Glad it was helpful!

Great job... thanks mate 😊

Thanks Liam, I have not watched elderlyiron..going to have to check it out..thanks!

Awesome 👍 , In absence of a sds drill , this is an awesome way to drill through ceramic tiles without bricking them.Thank you

Thanks so much. I don't take any chances these days after this supposed granite mason came and drilled a huge hole in our granite wall for a grab bar (no clue what he was doing!) Now we research everything to do with drilling through tile or natural stone. I especially love the finishing touch at the end of your video. That is classic!!

@yourbeekeeper

10 жыл бұрын

Thank you Elke, glad this video helps out... sorry to hear about your granite mason issues.

I really like my Makita angle grinder... have a million hours on it and recently replaced the armarature bearings on it...good as new. Over the top on the TP is the only way to go.

Excellent video. Thanks for demonstrating.

this is what i like nice simple straight forward videos, good job

@yourbeekeeper

9 жыл бұрын

mic363 Thank you.

Nicely done :) I normally use a glass drillbit for the holemaking in those kinds of tiles, regular mono/bicottura tiles and marble aswell, it's a bit easier than the masonery bit because it will not slip as much and you don't have to use the hammer for making the pilot holes. I like the masonary drillbit technique for harder types of tiles as a porcellenato.

@amygarland9085

2 жыл бұрын

We gotta get the best of it for you and me yes I will be your husband for life

@hamzamubashir9220

Жыл бұрын

@@amygarland9085 q,c. Aww

Nice touch at the end! 😀

Just thought I might be able to help someone out who might have this task on their honey-do list. Ryobi is hit or miss for me..I have one of their table saws and it's a capable machine for the money. Never messed with their battery operated tools though. Thanks Matt!

@adrianmario6705

2 жыл бұрын

you prolly dont give a damn but does anybody know of a method to log back into an instagram account?? I was dumb forgot my password. I love any tricks you can give me

@jadrene4678

2 жыл бұрын

@Adrian Mario Instablaster :)

Well done ... GREAT VIDEO! ... excellent workaround to buying a tile drill bit!

@yourbeekeeper

8 жыл бұрын

Thanks Albert.

Thank you and thanks for watching!

Love the finishing touch V

Nice good work really appreciate your work.

Thanks Kev!

You are so very right!

I like these videos. Makes me feel like Ive learned nothing in my 60 years on earth.

Thank you for this tutorial-vid; learned something new, and most useful today. Now there’s no need for me to spend some amount for a glass drill bit 😉

Excellent tip!!

You are very welcome.. Hope it helped out.

Thanks a lot,for me,it's insanely useful Thanks once again

Thank you!

Great video. Made it real easy to do.

Thank you very much. Very useful.

Thank you so much. I like the toilet paper folding at the end, lol.

Nice touch at the end! Thanks for the video...it really helped!

@yourbeekeeper

10 жыл бұрын

Your very welome John. Glad it helped out.

Great tip re using the hammer and drill bit to break the glaze! Thanks!

@yourbeekeeper

7 жыл бұрын

You are very welcome Anthony.

VERY USE FULL THANKS A LOT

Many thanks for your help, worked like a charm!

@yourbeekeeper

10 жыл бұрын

Fantastic! I'm glad it helped out.

From experience. In a bathroom / shower environment the screws might start to corrode and expand at the plug and could crack the tile. I always drill the hole in the tile slightly larger than the hole for the plug so the front end of the plug sits against the wall not the tile. If the screw then corrodes there is room for expansion.

thx! i'm really convinced. gonna try today

@yourbeekeeper

8 жыл бұрын

+Man-Yong Lee Hope it worked out.

This is the knowhow that really works... Thank you for sharing this valuable knowledge. 🤝

@yourbeekeeper

Жыл бұрын

Glad it helped

this video has helped me a lot, thank you very much mate. it's not a torture any more

@yourbeekeeper

7 жыл бұрын

Happy to help out.

Thank you.

So that's how they get the TP to go pointy. Thanks for the video. Nice work.

Thanks for the awesome tip. Have a blessed day

@yourbeekeeper

10 жыл бұрын

Your very welcome Dave.

Love the Ending... Masterpiece Ending Style... 👌👍

Thank you and Thanks for watching.

Quebec would be quite a commute for me. ;-) Take your time and you can drill through any tile. Keep the bit slow and steady to avoid heat and you will be fine. You can even squirt the bit with water while you are drilling to keep it cool.

Nice touch of folding the paper in the end.

Thanks for sharing! 👍

Was just looking to see what would be needed to drill in ceramic tile (type of drill / drill bit). Had intended to drill at a joint to minimize potential cracking. This video showed me how to mount where I really want to put a towel hanger - in the middle of a tile. Nice job!!

@yourbeekeeper

9 жыл бұрын

William Cassedy thank you for taking the time to watch my video. You actually have a reduced risk of cracking or chipping when you drill in the center, or field, of the tile. The glazing tends to be thinnest at the edges. Good luck!

I was supposed to watch this before I had drilled tiles to put a towel rack. I got 5 holes accidentally instead of 4. Such a mess!! Thx for your useful tips. Love the end of the video though!!!

Nice job ! Learned a lot!

@yourbeekeeper

10 жыл бұрын

Thank you.

Yep...once through the glaze, the rest is easy. Thanks Gerry!

love your touch ... so good :) Greetings from Algeria !

@yourbeekeeper

9 жыл бұрын

khawla kaw Greetings Algeria! Thank you.. Greetings from California, U.S.A.

Awesome work appreciate 👏

Good tip..,thanks!

I love the end!!! Haha that's great!

Great video, thanks. I like the classy ending.

@yourbeekeeper

10 жыл бұрын

THank you.

Great job!

the fold you did at the end just goes to prove, no job is finished until the paperwork is complete.

Now I know the best method to drill into tile. And Dewalt does make a durable drill!Thank you

@yourbeekeeper

7 жыл бұрын

Thanks Robb, That Dewalt is still being used today, it's definately a destament to Dewalt durability.

Great job .

Thanks!

Good idea & useful !

I could see here the difference between a professional and a beginner...if I'm going to drill those tiles...it will Crack most of them....thanks for the tip guy.

Very helpful video, thank you.

@yourbeekeeper

8 жыл бұрын

+Fred Miravet You're very welcome. Glad to help out.