How to do Slab Reinforcement Detailing Using Autodesk Revit According to BS and Eurocodes (PART 1)
Revit can be used to detail very accurately and very quickly.
Жүктеу.....
Пікірлер: 62
@kanejaionmangoba53882 жыл бұрын
Thank God tutorials like this exist!🙌 Huge thanks to this Video.
@structuralengineeringtutor574
2 жыл бұрын
Thank God you appreciate the videos. Thank you very much. I will provide more tutorials
@darirusanferaa76473 ай бұрын
Thank you for sharing your knowledge and experience you have gained a new subscriber. Please continue to make a videos like this.
@MJ-ru3dp11 ай бұрын
Thank you so much for sharing your knowledge. I truely appreciate it. All the way from Jamaica. Blessings.
@structuralengineeringtutor574
11 ай бұрын
I appreciate you bro. Thanks
@logoravaezekia17132 жыл бұрын
I've been using autocad for long time now. This software is wonderful. Thanks for sharing.
@structuralengineeringtutor574
2 жыл бұрын
Thank you for watching. 🙏🙏🙏
@Blesskudz2 жыл бұрын
You're the boss. Where have you been all along. You've gained a new subscriber!
@structuralengineeringtutor574
2 жыл бұрын
Thank you for your kind words. And thanks for subscribing
@jackson77ish15 күн бұрын
Thank you, you helped me alot! Cheers!
@kamranrehman4658 Жыл бұрын
❤❤❤❤very good information i boost my exp see this very good lacture ❤❤❤thank u sir
@zayaanhussaini617410 ай бұрын
Thanks for this video, it was very helpful to me as I was facing problem to segregate the Top & Bottom bars. 5 star from me
@structuralengineeringtutor574
10 ай бұрын
Thanks, i really appreciate you
@smishize2 ай бұрын
Thank you bro.
@srdjansimanic2404 Жыл бұрын
comment for the algo, great stuff, keep going!
@structuralengineeringtutor574
Жыл бұрын
Thanks brother
@megadesignarch40232 жыл бұрын
Wonderful inspiring
@structuralengineeringtutor574
2 жыл бұрын
Thank you. You inspire more
@rocky800410 ай бұрын
Awesome teaching Sir Ji
@structuralengineeringtutor574
10 ай бұрын
Thank you. I appreciate it
@SirKombabomba2 жыл бұрын
Awesome Skills-Thanx
@structuralengineeringtutor574
2 жыл бұрын
Thank you Sir
@SirKombabomba
Жыл бұрын
@@structuralengineeringtutor574 Luv Your WORK on REVIT DESIGN
@dancancrinskid2989 Жыл бұрын
Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc
@dancancrinskid2989 Жыл бұрын
Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc to H12 etc etc?
@mojahedsabbah26 Жыл бұрын
Thanks for the great work!! Is there any way to demonstrate the hooks of bars in the top view? That is, to show the end bars as - L- bars looking in the plan of the slab??
@structuralengineeringtutor574
Жыл бұрын
Yes you can. But i don't like that. Because it sometimes cause confusion especially when there are alot of things in the drawing
@prabhatsingh1509 Жыл бұрын
brilliant
@structuralengineeringtutor574
Жыл бұрын
Thanks
@SchwanaCARDHUT2 жыл бұрын
Bravo 👏 👏
@structuralengineeringtutor574
2 жыл бұрын
Thank you my friend
@SchwanaCARDHUT
2 жыл бұрын
U are greatest
@md.habiburrahman-xg9sd7 ай бұрын
Hello, you need to make some correction. long direction bar will be in bottom. Otherwise, your tutorial is very good.
@justscribeyourthought98552 жыл бұрын
thanks
@structuralengineeringtutor574
2 жыл бұрын
Mostly welcome my friend.
@sureshcivil86272 жыл бұрын
Nice video can u make a video on Drop panel of Flat slab & raft with opening - It helps us Lot
@structuralengineeringtutor574
2 жыл бұрын
Thank you my friend. Will do that Inshallah
@sureshcivil8627
2 жыл бұрын
Please I have also raft.. Can u please do.. It saves me.. Respect from dubai
@fokall144710 ай бұрын
Good afternoon, your video is enlightening, can you please make a video or explain it here how you made your custom call out tag to make it look like the one on cad-rc. Thanks..
@structuralengineeringtutor574
10 ай бұрын
Yes, with pleasure Sir
@rodneymoyo132 жыл бұрын
Where have you been sir, this is very great
@structuralengineeringtutor574
2 жыл бұрын
I have been around my friend. Thank you for your kind words.
@fvzbilge4 ай бұрын
You apply different methods for your slab reinforcement divisions.right?
@LIONHEART666662 жыл бұрын
hello sir, thank you for sharing this tutorial. Can you also share the family that you are using ? thank you once more
@structuralengineeringtutor574
Жыл бұрын
You are mostly welcome my friend. I am not using any family however. But i will be happy to share the revit file should you need it
@zolgerelt2 жыл бұрын
how did u make ur section cut to look like that? is there a tutorial for that? response would be highly appreciated
@structuralengineeringtutor574
2 жыл бұрын
Hello Zolo, there is nothing special about that section cut. Just select a section and cut it where you want. I might be wrong but i believe i didn't skip any step to get exactly what i did. Thank you for watching my video.
@tagaparalaya2 жыл бұрын
what if the lap is cranked? how do you show a bar on the plan that it is a cranked bar?
@structuralengineeringtutor574
2 жыл бұрын
If the lap is cranked, then you might have to show the horizontal section of the slab. However, in BS 8110, there is no need for cranked bars. I believe this concept is mainly in Indian Code
@ribelashx96402 жыл бұрын
CAN YOU MAKE ONE FOR STAIRS
@structuralengineeringtutor574
2 жыл бұрын
Yes , will surely do. Stand by for that
@niinuetey9878 Жыл бұрын
GUYS, USE PROTA STRUCTURE. YOU COULD DO THIS IN UNDER 30 SECONDS
@structuralengineeringtutor574
Жыл бұрын
I believe you can. But will then require alot of corrections
@justscribeyourthought98552 жыл бұрын
hey you didn't show the crank and lap length i think thats important
@structuralengineeringtutor574
2 жыл бұрын
You are right, its important and i didn't show it because in my country, its not necessary to show. They say it's a site Engineers job to determine that in regards to the length of the bars he is receiving from the suppliers. But all in all, i agree its important.
@justscribeyourthought9855
2 жыл бұрын
@@structuralengineeringtutor574 well its alright!! do you have any video for rbar quantity schedules?
@danieldonkoh13372 жыл бұрын
Please ... .how can I contact you?
@structuralengineeringtutor574
2 жыл бұрын
My email: omi_kaka@hotmail.com
@ceepatekconsult2 жыл бұрын
How do I install BIM software
@structuralengineeringtutor574
Жыл бұрын
Which BIM software?
@ceepatekconsult
Жыл бұрын
@@structuralengineeringtutor574 I thought what you used was BIM
Пікірлер: 62
Thank God tutorials like this exist!🙌 Huge thanks to this Video.
@structuralengineeringtutor574
2 жыл бұрын
Thank God you appreciate the videos. Thank you very much. I will provide more tutorials
Thank you for sharing your knowledge and experience you have gained a new subscriber. Please continue to make a videos like this.
Thank you so much for sharing your knowledge. I truely appreciate it. All the way from Jamaica. Blessings.
@structuralengineeringtutor574
11 ай бұрын
I appreciate you bro. Thanks
I've been using autocad for long time now. This software is wonderful. Thanks for sharing.
@structuralengineeringtutor574
2 жыл бұрын
Thank you for watching. 🙏🙏🙏
You're the boss. Where have you been all along. You've gained a new subscriber!
@structuralengineeringtutor574
2 жыл бұрын
Thank you for your kind words. And thanks for subscribing
Thank you, you helped me alot! Cheers!
❤❤❤❤very good information i boost my exp see this very good lacture ❤❤❤thank u sir
Thanks for this video, it was very helpful to me as I was facing problem to segregate the Top & Bottom bars. 5 star from me
@structuralengineeringtutor574
10 ай бұрын
Thanks, i really appreciate you
Thank you bro.
comment for the algo, great stuff, keep going!
@structuralengineeringtutor574
Жыл бұрын
Thanks brother
Wonderful inspiring
@structuralengineeringtutor574
2 жыл бұрын
Thank you. You inspire more
Awesome teaching Sir Ji
@structuralengineeringtutor574
10 ай бұрын
Thank you. I appreciate it
Awesome Skills-Thanx
@structuralengineeringtutor574
2 жыл бұрын
Thank you Sir
@SirKombabomba
Жыл бұрын
@@structuralengineeringtutor574 Luv Your WORK on REVIT DESIGN
Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc
Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc to H12 etc etc?
Thanks for the great work!! Is there any way to demonstrate the hooks of bars in the top view? That is, to show the end bars as - L- bars looking in the plan of the slab??
@structuralengineeringtutor574
Жыл бұрын
Yes you can. But i don't like that. Because it sometimes cause confusion especially when there are alot of things in the drawing
brilliant
@structuralengineeringtutor574
Жыл бұрын
Thanks
Bravo 👏 👏
@structuralengineeringtutor574
2 жыл бұрын
Thank you my friend
@SchwanaCARDHUT
2 жыл бұрын
U are greatest
Hello, you need to make some correction. long direction bar will be in bottom. Otherwise, your tutorial is very good.
thanks
@structuralengineeringtutor574
2 жыл бұрын
Mostly welcome my friend.
Nice video can u make a video on Drop panel of Flat slab & raft with opening - It helps us Lot
@structuralengineeringtutor574
2 жыл бұрын
Thank you my friend. Will do that Inshallah
@sureshcivil8627
2 жыл бұрын
Please I have also raft.. Can u please do.. It saves me.. Respect from dubai
Good afternoon, your video is enlightening, can you please make a video or explain it here how you made your custom call out tag to make it look like the one on cad-rc. Thanks..
@structuralengineeringtutor574
10 ай бұрын
Yes, with pleasure Sir
Where have you been sir, this is very great
@structuralengineeringtutor574
2 жыл бұрын
I have been around my friend. Thank you for your kind words.
You apply different methods for your slab reinforcement divisions.right?
hello sir, thank you for sharing this tutorial. Can you also share the family that you are using ? thank you once more
@structuralengineeringtutor574
Жыл бұрын
You are mostly welcome my friend. I am not using any family however. But i will be happy to share the revit file should you need it
how did u make ur section cut to look like that? is there a tutorial for that? response would be highly appreciated
@structuralengineeringtutor574
2 жыл бұрын
Hello Zolo, there is nothing special about that section cut. Just select a section and cut it where you want. I might be wrong but i believe i didn't skip any step to get exactly what i did. Thank you for watching my video.
what if the lap is cranked? how do you show a bar on the plan that it is a cranked bar?
@structuralengineeringtutor574
2 жыл бұрын
If the lap is cranked, then you might have to show the horizontal section of the slab. However, in BS 8110, there is no need for cranked bars. I believe this concept is mainly in Indian Code
CAN YOU MAKE ONE FOR STAIRS
@structuralengineeringtutor574
2 жыл бұрын
Yes , will surely do. Stand by for that
GUYS, USE PROTA STRUCTURE. YOU COULD DO THIS IN UNDER 30 SECONDS
@structuralengineeringtutor574
Жыл бұрын
I believe you can. But will then require alot of corrections
hey you didn't show the crank and lap length i think thats important
@structuralengineeringtutor574
2 жыл бұрын
You are right, its important and i didn't show it because in my country, its not necessary to show. They say it's a site Engineers job to determine that in regards to the length of the bars he is receiving from the suppliers. But all in all, i agree its important.
@justscribeyourthought9855
2 жыл бұрын
@@structuralengineeringtutor574 well its alright!! do you have any video for rbar quantity schedules?
Please ... .how can I contact you?
@structuralengineeringtutor574
2 жыл бұрын
My email: omi_kaka@hotmail.com
How do I install BIM software
@structuralengineeringtutor574
Жыл бұрын
Which BIM software?
@ceepatekconsult
Жыл бұрын
@@structuralengineeringtutor574 I thought what you used was BIM
Williejohnjohndcecan