This video is perfect for towns that still have Thunderbolts in service.

I always see brushes and bearings referenced when I watch videos of sick thunderbolts so it’s interesting to see them up close

@indymetrosirens5643

3 жыл бұрын

Also it’s interesting to see what a brush looks like when it’s good vs when it’s bad

@cooldomino1800

3 жыл бұрын

@@indymetrosirens5643 yeah. A lot of thunderbolt owners will find this handy.

@marciovieira8092

2 жыл бұрын

👍😞😘😃🌅💋

@cooldomino1800

2 жыл бұрын

@@dj-la--wolf1288 I got it from a friend for free.

@ManofCulture

2 жыл бұрын

@@cooldomino1800 Lucky

I really like how you take care of the bolt. It looks somehow...relaxing.

@cooldomino1800

2 жыл бұрын

Yeah. Until you have to move something heavy. Like the horn. Lol.

@emrilbennett8704

5 ай бұрын

@@cooldomino1800 I think he means to watch it

11:10. Spinning up a bolt is something we don't see often. Awesome video.

@cooldomino1800

Жыл бұрын

Yeah. And thanks.

@trainsandsirensofilinmiwi2080

Жыл бұрын

@@cooldomino1800 Your welcome.

Keep up the repair videos, wish there was more out there, thank you so much.

@cooldomino1800

2 жыл бұрын

Your very welcome! Wish there’s more out there as well.

Very well done, I’d say you did much better than mine from a few years back!

@soum23

3 жыл бұрын

@Cannonball Films I cannot seem to find your video on thunderbolt maintenance have you deleted it?

@NPminnetonka

3 жыл бұрын

Planes And Sirens Of Upper Midwest it was switched to private since my way of maintaining the thunderbolt has changed, and the constant onslaught of nitpickers correcting every little part name

@soum23

3 жыл бұрын

@@NPminnetonka Ohhhh

This is awesome there is like no videos on how to do maintenance on a thunderbolt so thank you this helped out a lot

Cool video! Your SD10 looks a lot better!

@cooldomino1800

4 жыл бұрын

I think so too!

@kansasstatealerting2424

3 жыл бұрын

@boyfamersshakersfom Marqwinez What?

I just KEEP watching this video, and I don't even have a Thunderbolt. It's so cool how these sirens work inside. Great video

@cooldomino1800

Жыл бұрын

Thank you! Glad you are enjoying it!

@J19_vlogger74

Жыл бұрын

@@cooldomino1800 You're welcome!

@emrilbennett8704

5 ай бұрын

Agreed

This is a very neat video!

@cooldomino1800

4 жыл бұрын

Jared Thompson thanks.

@jaredthompson3011

4 жыл бұрын

@@cooldomino1800 Yup. No problem.

Really nice! Greetings from Germany 👌🏻👍🏻

Nice siren i was looking for a detail nice good thing i saw this vid

This is really cool thanks

Wow this is so cool now I know what the inside of a thunderbolt

@cooldomino1800

3 жыл бұрын

Yeah. They are really cool!

i have the same camera as you (Cannon Vixia HF R800) btw great video, love thunderbolts.

@cooldomino1800

3 жыл бұрын

Me too!

Good video!

@cooldomino1800

4 жыл бұрын

Sirens & Thunderbolts 1003 thanks.

Can you make a video about some steps to take in case your thunderbolt's chopper has some of the problems you mentioned? (Cleaning motor fields, cleaning a commutator, how to fix a scraping noise when the chopper spins)

@cooldomino1800

3 жыл бұрын

I can try.

@HX56Music

2 жыл бұрын

@@cooldomino1800 I agree, please do this.

I would love to own a thunder bolt siren like this

Perfect video.

I plan on getting a bolt, this will be very helpful

@cooldomino1800

Жыл бұрын

Thanks! Good luck!

@kansasclocksandsirens

Жыл бұрын

@@cooldomino1800 I'll need it lol

Weird question, but does a bottom motor bearing on a Model 2 also just slide out like that on a Thunderbolt? I recently acquired a Model 2 and am having trouble with getting that free.

@cooldomino1800

2 жыл бұрын

Yeah. It should come out of the bearing holder. I will finish editing my model 2 repair video sometime soon.

@VintageCollections

2 жыл бұрын

@@cooldomino1800 ok! Thanks!

This is very helpful since I am going to get a thunderbolt in the future.

Any idea how to fix brushes on a thunderbolt or how to replace them

@cooldomino1800

Жыл бұрын

Yeah. I can possibly make a video of that.

I used to do non-operational testing on our sirens if we had a problem during an activation. Usually I had to do that in the middle of the day. I never wanted to blast the neighborhood while testing so I would cycle the three switches in the cabinet one at a time (blower, chopper, rotator). The most hideous sound was running the blower without the chopper, it sounded like a giant fart-cushion. We had people who were at home and asleep during the work day (shift workers). They would invariably call and complain about the fart-cushion blower. My biggest maintenance problem was in the rotator due to a lack of lubrication. When it is sitting on top of a sixty foot tall wooden pole that would mean a call to the siren company to come out and service it. Not a task that I was ready to do. I could climb a ladder and service it from the cabinet (sometimes even replace contactor parts or reset a thermal that had tripped out).

@emrilbennett8704

5 ай бұрын

That has to be an awful sound, but what you called it was funny lol

this is awesome, i want to get the 1003 t-bolt eventually

@cooldomino1800

2 жыл бұрын

Yeah. Me too! Good luck finding one!

@Nottruesigma

2 жыл бұрын

.

@Nottruesigma

2 жыл бұрын

.

@Nottruesigma

2 жыл бұрын

.

@Nottruesigma

2 жыл бұрын

.

There needs to be more videos like this

@cooldomino1800

4 жыл бұрын

I think so too.

@TexasRailfan2008

4 жыл бұрын

Creeperboy099 especially for new thunderbolt owners!

@johndeerefan725

Жыл бұрын

​@@TexasRailfan2008 and towns that still have Thunderbolts still in service.

Nice! Do you know any dimensions of the siren? I want to build at half, 1/4, or 1/8 of the regular sire

@cooldomino1800

3 жыл бұрын

I’ll have to take some measurements. You can also look in the thunderbolt manual.

@Mrbowling300.0

3 жыл бұрын

@@cooldomino1800 The Thunderbolt Manual?

@cooldomino1800

3 жыл бұрын

@@Mrbowling300.0 www.civildefensemuseum.com/sirens/manuals/thunderbolt/Tbolt-2.pdf

@Mrbowling300.0

3 жыл бұрын

@@cooldomino1800 lol, I actually somehow came across that link earlier, sorry for making you searching up that link for me

@cooldomino1800

3 жыл бұрын

@@Mrbowling300.0 it’s ok.

I love this. Let me ask you this. Do you have this plug into 120 and 220?

@cooldomino1800

2 жыл бұрын

I made a video on my 2nd channel about how to get 240 from 120.

@christophermattox3972

2 жыл бұрын

@@cooldomino1800 OK. The reason I asked is because I am blind and I am not able to see what you were doing but I really do appreciate the description on how you are taking things apart and putting things back together.

@Jd-gy7kk

2 жыл бұрын

@@christophermattox3972 if you are blind, i would not recommend trying to do electrical work without help, if you put one thing in the wrong place or touch one thing that is "live," it could be the end of your siren, or even worse, your life

@christophermattox3972

2 жыл бұрын

@@Jd-gy7kk that’s why I got my pastor who’s going to help me hook this up.

@Jd-gy7kk

2 жыл бұрын

@@christophermattox3972 good to know, just trying to be helpful, good luck!

This may have been addressed, but how do you get new brushes if needed? Are parts still available for these?

@cooldomino1800

3 жыл бұрын

Brushes are still available. Because the model 2 is still being made. I found some angle grinder brushes that are the same size. I don’t have the link handy now.

@EASOhio

3 жыл бұрын

I got a link, actually, www.helwigcarbon.com/product-category/carbon-brush/spring-loaded/

@cooldomino1800

3 жыл бұрын

@@EASOhio Nice! there are a lot of brushes on there, Do you have a link for the exact set of brushes?

@EASOhio

3 жыл бұрын

@@cooldomino1800 I'm not sure which one's exactly, but I do know that they're the one's West Shore Services uses.

@cooldomino1800

3 жыл бұрын

@@EASOhio ok. Of I can find it, I’ll pin the link to brushes.

If I don’t have good brushes, do you happen to know where I could get a few?

@cooldomino1800

3 жыл бұрын

There are some on eBay that are very similar. I don’t have the link handy now but I’ll make a video of how to change the brushes.

@soum23

3 жыл бұрын

Oh ok, Thanks!

Nice

@cooldomino1800

4 жыл бұрын

Thanks

If you have a Thunderbolt 1003, can you tell me how to do maintenance on the dampers/solenoids? Edit: When I said "tell me", I meant to say "make a video".

@cooldomino1800

Жыл бұрын

Yeah. I would definitely do that. If I have one.

@pLzza4150

Жыл бұрын

Thanks.

Will be watching this if I get my hands on the thunderbolt in Windsor Hills and Overhill dr Los Angeles, CA

@cooldomino1800

3 жыл бұрын

Ok. Well. Good luck finding one.

Very informative video but my question kind of still remains. How does the siren rotate without binding the wires for the rotor?

@cooldomino1800

Жыл бұрын

There’s a think called collector rings and brushes which transfers power from the rotator to the chopper.

@Snake-561

Жыл бұрын

@@cooldomino1800 Ahh I see, so the wires don't actually move with the rotating parts, the power gets transferred through the brushes. I didn't even think of that. Thanks for the info and quick response!

@cooldomino1800

Жыл бұрын

@@Snake-561 No problem!

Is this siren is able to do the Hi Lo sound?

@cooldomino1800

Жыл бұрын

This is a 1000T so with these parts it can’t The thunderbolt 1003 can do hilo because it has solenoids blocking off one of two tones alternatively.

I watched every second of this video! I don't own a thunderbolt (sadly)

@JoshsstuffOG

3 жыл бұрын

Vyclops , you can get them for free

@HX56Music

3 жыл бұрын

@@JoshsstuffOG From where? I don't think you can.

@Mrbowling300.0

3 жыл бұрын

@@HX56Music I have to agree with him. If they were free, I would have heard of that and get one for myself already

@HX56Music

3 жыл бұрын

@@Mrbowling300.0 The only way I know of POTENTIALLY getting one for free, would be if you contact a Fire Department with an inactive one, and ask if you can have it. They might just give it to you to get it off their hands, but in most cases they want some cash for it. Only a few enthusiasts have gotten sirens for free, and they are very lucky.

@ballsacksniffer420

3 жыл бұрын

Same

Where does the blower go to the chopper?

@cooldomino1800

Жыл бұрын

The air from the blower comes up from under the head.

what voltage and amp level do bolt choppers run at (chopper level 1)

@cooldomino1800

3 ай бұрын

120v at 5-7 amps.

@Sirensofgrimescounty

3 ай бұрын

@@cooldomino1800so you can run it off of standard house outlets! Great!

Nice...

@cooldomino1800

3 жыл бұрын

Thanks!

@meisnice2448

3 жыл бұрын

@@cooldomino1800 Also, is there a video, how to do Maintanance on Thunderbolt 1003? I would like to see how to maintanance the Solenoids. And last question, where you got this thunderbolt from?

@cooldomino1800

3 жыл бұрын

The Siren Kingdom! I did not see a video on how to do a 1003 maintenance. But if I get one I’ll be sure to do it. And also. This siren is not mine. It belongs to a friend.

@meisnice2448

3 жыл бұрын

@@cooldomino1800 Ok.

Where did you get this siren from?

@cooldomino1800

Жыл бұрын

From a friend.

I never seen a inside a thunderbolt sirenn😁👍

Hello, so I got a question how do you connect the wires to the thunderbolt to the control panel or plug. I have a thunderbolt 1000B in my garage and I’m trying to get the thing running again.

@cooldomino1800

3 жыл бұрын

So. What you need to do is locate 2 sets of wires. One if for the rotator and another is for the chopper. You need to connect 2 plugs to the system. (120vac or 240vac). Locate the 2 wires coming from the rotator motor and connect your power cord to that. Look for a black cable that has 2 wires in it that goes into the stand pipe. That is your chopper. I hope This helps.

@TheJellyCan

3 жыл бұрын

Can u pls make a video how to do that, I'm sorry I'm just not good at wiring lol. The people take took down the siren they disconnect meaning cut the wires off and I have no idea where to get the power to hook up the control panel

@TheJellyCan

3 жыл бұрын

And btw, where do I get the power to turn on the control panel too

@cooldomino1800

3 жыл бұрын

@@TheJellyCan sure. It may be a while. I also recommend looking at the thunderbolt manual.

@cooldomino1800

3 жыл бұрын

@@TheJellyCan I used a breaker panel. When I get a RCM, I’ll make a follow up video. I made a video on my 2nd channel on how to get 240vac.

Where do you get the sirens

@cooldomino1800

Жыл бұрын

I got this one In the video from a friend.

Maybe you can make video on how to replace damaged parts if somebody would have Thunderbolt with damaged parts.

@cooldomino1800

3 жыл бұрын

Sure. Like what parts you would like to see?

@meisnice2448

3 жыл бұрын

@@cooldomino1800 How to change brushes, coils and fields.

@cooldomino1800

3 жыл бұрын

@@meisnice2448 ok. I’ll see what I can do.

@meisnice2448

3 жыл бұрын

@@cooldomino1800 Ok Thanks.

And also I have a question what is the heaviest part on the thunderbolt?

@cooldomino1800

Жыл бұрын

Probably the blower. 4M is 500 lbs while 6M is 800 lbs.

@ThunderboltSiren1003

Жыл бұрын

@@cooldomino1800 what about the Rotator in the chopper and all that stuff like the head of the siren

@cooldomino1800

Жыл бұрын

@@ThunderboltSiren1003 I’m going to say approximately 300-400 lbs.

@ThunderboltSiren1003

Жыл бұрын

@@cooldomino1800 what's the heaviest part on it though like the siren head the chopper and the Rotator box and all that stuff and the horn

@cooldomino1800

Жыл бұрын

@@ThunderboltSiren1003 the horn is like 80 lbs, chopper is like 60 lbs, and rotator assembly is around 140 lbs. these numbers are just rough estimates.

Yeah like we just have a thunderbolt siren in our garage lol

What do the brushes do again?

@cooldomino1800

3 жыл бұрын

For the collector rings, they push on the rings making a contact. The motor brushes will push against the commutator making a connector to energize the rotor.

18:57, the rest of the siren is metal too, does that mean if you put power to the siren the ENTIRE siren is live?

@cooldomino1800

2 жыл бұрын

Normally no. Because the windings are isolated from ground. But it’s still important to ground your siren just in case something happens.

@Jd-gy7kk

2 жыл бұрын

@@cooldomino1800 oh, good to know. thanks

So, it would be impossible to do an Induction conversion?

@cooldomino1800

3 жыл бұрын

Shepherd Wolf like a phase converter?

@Joethaboss66

3 жыл бұрын

@@cooldomino1800 I think he means to replace the brushed chopper motor with an AC induction motor. Also, do you have a proper thunderbolt blower

@cooldomino1800

3 жыл бұрын

@@Joethaboss66 I don’t have a proper blower. So maybe if I had one.

33:35 growl test

These are a lot bigger than i thought.

How big is the horn to the chopper

@cooldomino1800

3 жыл бұрын

It’s around 5ft.

@CoolSirens1000T

3 жыл бұрын

@@cooldomino1800 thanks

I was told that these can't be operated in temperatures under freezing or it will ruin the belt.

@chass5438

Жыл бұрын

Edit: That's why they don't test them here when it's cold.

@cooldomino1800

Жыл бұрын

@@chass5438 that makes sense.

how would i obtain one

@cooldomino1800

2 жыл бұрын

They are very hard to find and get. Your best bet would be west shore services. You can also ask someone who is selling one. Or a fire department or city that has a inactive one.

is it ok to grab the commutator like that?

@cooldomino1800

Жыл бұрын

Can I get a time stamp?

@faceplant755

Жыл бұрын

@@cooldomino1800 12:36

how change chopper level

@cooldomino1800

3 жыл бұрын

You need a RCM or a variable transformer to change the chopper level. For a RCM, you connect one lead anywhere between 1 and 7 while the other lead is connected to common.

I thought the warning said "do not watch with headphones"

@cooldomino1800

3 жыл бұрын

Darren8373 nope. It’s just harm to siren risk. Lol.

I like the video, but a lot of the time I hear “right here” at the beginning parts

Get a commutator stone and clean that commutator, repack the bearings and change the motor brushes, and it will run perfectly.

@cooldomino1800

4 жыл бұрын

I feel like its pretty good. It spins really nicely. the brushes are fine.

Could you do Allertir and 3t22 maintenance if you can.

@cooldomino1800

3 жыл бұрын

I would if I have them.

@brandonburkest6229

3 жыл бұрын

@@cooldomino1800 its all cool man

@brandonburkest6229

3 жыл бұрын

I am saving 1200 for an Allertor on Ebay. Once I get that thing, I'm gonna refurbish that baby.

@cooldomino1800

3 жыл бұрын

@@brandonburkest6229 nice! Good luck. Remember, think about the shipping.

Why does the chopper use a universal motor with brushes and not an induction motor?

@cooldomino1800

4 жыл бұрын

Zach Z because the motor runs on 1 phase and you can get higher horse power and RPM with a small motor. If this was a induction motor with the same horse power and RPM, it will be bigger and heavier. I hope this makes sense.

@zachz96

4 жыл бұрын

@@cooldomino1800 It makes sense now. The reason I asked is that an Induction motor does not have brushes and would not require as many consumable parts. Only the contact ring brushes would need to be replaced

@cooldomino1800

4 жыл бұрын

Zach Z yeah. As long as the commutator is good.

@MinecraftPro97k

3 жыл бұрын

@@cooldomino1800 But what about brushless DC motors?

@cooldomino1800

3 жыл бұрын

Shepherd Wolf that’s pretty much the same thing as a 3 phase induction motor.

We did have a Thunderbolt siren but got replaced bc they did not watch this video

Where'd you get 3 phase 240vac

@cooldomino1800

2 жыл бұрын

This siren does not need 3 phase. For my SD10, I got power from a school and from my phase converter I’m making.

@9_12Port3T2I

2 жыл бұрын

@@cooldomino1800 Oh, what about the single phase 240vac

@cooldomino1800

2 жыл бұрын

@@9_12Port3T2I you can get that from a 240v outlet or by being 2 lives into a load. I made a video on my 2nd channel.

@9_12Port3T2I

2 жыл бұрын

@@cooldomino1800 Can I have the link to your second channel or maybe the video link?

@cooldomino1800

2 жыл бұрын

@@9_12Port3T2I my 2nd channel is linked in the description of the video or at the outro. Here’s the link on how to get 240. kzread.info/dash/bejne/lpV3lLRmks-4p5s.html

is it a 4/5 or a 5/6

@cooldomino1800

3 жыл бұрын

5/6.

I was wondering how these beasts work

@cooldomino1800

3 жыл бұрын

Yeah. These are pretty cool!

@noahandrewsandrews7830

3 жыл бұрын

@@cooldomino1800 I agree with you the Thunderbolt is one of my favorite sounds plus I believe it's the only sign that run him a blower instead of a chopper correct me if I'm wrong

Can you make a vid on how to replace a solenoid?

@cooldomino1800

3 жыл бұрын

I can if I have a 1003. But I don’t.

@Tdransomsdooz

3 жыл бұрын

Ok it's fine and greet vid I love it

@Tdransomsdooz

3 жыл бұрын

My solenoid is broken on my 1003 and I live in the Nz

@cooldomino1800

3 жыл бұрын

@@Tdransomsdooz oof. There should be some screws that hold it to the box.

lol its a free exercise doing this

Is that an sd-10 at 33:57? Also I love that ending!

@cooldomino1800

4 жыл бұрын

Tylertheawesomdude2988 yup. It sure is.

1003's are 1000T's with solenoids

it sounded like it was ran with a blower in the end

@cooldomino1800

3 жыл бұрын

TΩwmaX yup. I had a leaf blower.

“Fs Thunderbolt 1000T Teardown”

@cooldomino1800

3 жыл бұрын

Yup. Pretty much!

I really wish i could get a hold of a thunderbolt

@soum23

3 жыл бұрын

You could go to West Shore Services...

@danerichardson446

3 жыл бұрын

@@soum23 i actually got some😂😂

@soum23

3 жыл бұрын

Oh ok!

@Tbolt1000TForLife

2 жыл бұрын

Me too but sadly I can't afford it right now. Maybe someday.

@danerichardson446

2 жыл бұрын

Funny story i actually got two oldies

What's the difference between a THUNDERBOLT A and B

@cooldomino1800

19 күн бұрын

A is 3 phase and B is 1 phase.

@fs_sd-10

19 күн бұрын

@@cooldomino1800 I've legit never heard of a 3 phase THUNDERBOLT.

@cooldomino1800

19 күн бұрын

@@fs_sd-10 the blower is 3 phase on the A series. All thunderbolt choppers are 1 phase. Older A Series thunderbolts have 3 phase rotator motors.

So much bigger than I thought

what you want to do is inspect the chopper of the siren this is the chopper- (SLAAAP!!!!) (SLAAAAAP!!!!) the slaps got me dead also i dont think SLAPPING the chopper is propper anyways-

@cooldomino1800

4 ай бұрын

An I get a time stamp?

@icylikesaviation

4 ай бұрын

@@cooldomino1800 1:37

Can you do a maintenace on a p-50 pls??

@cooldomino1800

3 жыл бұрын

If I have one. Yes. But I don’t have one.

@EnDerCOmManNdeR

3 жыл бұрын

@@cooldomino1800 ok

Where Do I Buy This .

@cooldomino1800

3 ай бұрын

Got it from a friend. The blower came from another friend.

@cooldomino1800

3 ай бұрын

They are extremely hard to find unfortunately, you might be able to get one from WSS.

@Thunderbolt_1003

3 ай бұрын

@@cooldomino1800 god dang it i live in an apartment and my garden is small as heck so i need a big house for this beauty

@Thunderbolt_1003

3 ай бұрын

And garden

@Sirensofgrimescounty

3 ай бұрын

@@cooldomino1800doesnt WSS have like an entire field full of thunderbolts near the trees

How could I buy one

@cooldomino1800

3 жыл бұрын

CoolSirens this one belongs to a friend. You may find one at West shore services.

@JoshsstuffOG

3 жыл бұрын

Thank you

@JoshsstuffOG

3 жыл бұрын

Anywhere else , I don’t live near west shore?

@cooldomino1800

3 жыл бұрын

@@JoshsstuffOG you can ask cities that have them. Or fire departments.

@JoshsstuffOG

3 жыл бұрын

Noice

IN THIS CASE

Btw How do you secure the Thunderbolt to the ground?...

@cooldomino1800

3 жыл бұрын

I would read the thunderbolt manual. But normally you will secure the stand pipe to a pole that’s in the ground.

@soum23

3 жыл бұрын

@@cooldomino1800 but I’m just wondering how you get the thunderbolt to rotate in the garage without it falling over...

@cooldomino1800

3 жыл бұрын

@@soum23 I mounted it to a shipping pallet.

@soum23

3 жыл бұрын

@@cooldomino1800 smart!

@soum23

3 жыл бұрын

@@cooldomino1800 what if I put rollers on the shipping pallet and put a thunderbolt on there do you think it would still rotate without falling over?

How do you buy thunderbolt ?😭

@cooldomino1800

3 жыл бұрын

They are very hard to come by. I’m fixing this one for a friend. Also if you really want a full thunderbolt, I would look at west shore services for one. They are expensive tho.

@doge4798

3 жыл бұрын

@@cooldomino1800 Ok nice video

@cooldomino1800

3 жыл бұрын

@@doge4798 thanks!

@doge4798

3 жыл бұрын

@@cooldomino1800 no problem

ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo

I don't have one but not toys

@cooldomino1800

4 жыл бұрын

good luck finding one

I Literally See A Brushed Motor

@cooldomino1800

2 жыл бұрын

Yup. That’s pretty much what a thunderbolt chopper motor is.

i would say you never told us what to do if there is something wrong

@cooldomino1800

Жыл бұрын

True.

@coolweathervids1849

Жыл бұрын

@@cooldomino1800 still i great tutorial i am hopefully getting a 2t22 and i don't see a lot of information on how to do maintenance on that

@cooldomino1800

Жыл бұрын

@@coolweathervids1849 yeah. There’s a video out there on how to pull the rotors off on one of those.

@coolweathervids1849

Жыл бұрын

@@cooldomino1800 ok if i get mine its a single phase so it has brushes i think soim going to have to look at

@cooldomino1800

Жыл бұрын

@@coolweathervids1849 ok. All Thunderbolt choppers are 1 phase. Like a model 2.

1003

@cooldomino1800

Жыл бұрын

I would do a 1003 if I have one.

Flathead Screwdriver Philips Head Screwdriver

I’m going to be honest you talk a little bit too fast

@cooldomino1800

3 жыл бұрын

Hector Quinteros sorry. Feel free to slow down this video. Lol.