I know so many shortcuts to make that process shorter but. No cap. The best video I've ever watched on KZread. I learnt from your process and I learnt from your errors. How can I get such a great experience from learning something. Thanks a lot. I hope you're considering creating more content because this helped me a lot. I knew nothing about these roofs but learnt so much and I haven't even finished yet. (Exam in 8 hrs.)

@mr.cargill

3 жыл бұрын

Thank you so much for the kind words. I do plan on creating more content. I've just been researching as a few of my videos need updating. Including this one, I hope the exam was ok.

Thank you every much for your help…❤❤love form Grenada 🇬🇩🇬🇩

@mr.cargill

Жыл бұрын

You are welcome. Thanks for the kind words.

I have learnt a lot Thank you

Thank you so much sir ... it really helped me in my SBA

@mr.cargill

3 жыл бұрын

You're welcome. Glad I could help.

This video help mi a lot .thanks 🙏

@mr.cargill

8 ай бұрын

You are welcome.

thanks for the video F enter,M enter join lines at any angle,also MODIFY and select join would lines to become as one

@mr.cargill

3 жыл бұрын

Thank you so much for the information and I'm glad you found the video helpful. J enter can also be used for joining lines.

@rodgerallen5896

3 жыл бұрын

Sure

Hi Mr Cargill, thanks for your video. Just to clarity does the hip rafter always have to be at 45deg? if not how do you determine the angle?

@malikplayz4425

3 жыл бұрын

Hey. I think by standard they should always be 45 degrees

@mr.cargill

Жыл бұрын

I am so sorry that I am just seeing your comment but yes the standard is 45

@polaraligned1

Жыл бұрын

The angle of the hip depends on the angle of the 2 roof sections it is joining. If they are the same pitch, then it is 45 degrees. If they are different pitches, then it will vary depending on the pitchs.

THANKS YOU VERY MUCH FOR THE VIDEO!!!!!

@mr.cargill

3 жыл бұрын

Happy to help.

Ty

@mr.cargill

4 ай бұрын

You're welcome.

Thank you

@mr.cargill

4 жыл бұрын

You are welcome

Excellent Content

How do you draw a slab roof plan?

@mr.cargill

4 жыл бұрын

Sorry for the late reply. The slab roof would be flat and there would not be any rafters.

@romarriorumble345

4 жыл бұрын

@@mr.cargill could you do a video showing the steel layouts please

hi what if you are doing a square building do you follow the same measurements

@mr.cargill

Жыл бұрын

Good day. Yes you would. You would end up with a pyramid roof.

@zamanicollins6940

Жыл бұрын

@@mr.cargill oh thank you

@mr.cargill

Жыл бұрын

@@zamanicollins6940 You're welcome.

When I do the 45 degree lines from one side, they don't line up with 45 degree lines in the other corner

@mr.cargill

3 жыл бұрын

Good day, if you mean that your 45 degree lines on the left are not meeting up with the ones one right exactly in the centre then you would have to check to ensure that your roof or the section of the roof that you are drawing is a perfect rectangle. If you're saying that the 45 degree lines are not meeting up with the ones in the opposite corner, this will only happen if your building is square and that would be a pyramid roof and not a hip roof like the one in the video. Let me know if my comment helped.

@malikplayz4425

3 жыл бұрын

@@mr.cargill Hello. The section of the roof is a perfect rectangle, but I am not sure why they aren't meeting

@mr.cargill

3 жыл бұрын

@@malikplayz4425 send me the drawing that that you are doing . My email is dontaecargill@gmail.com. I will look at it and tell you what's wrong.

@malikplayz4425

3 жыл бұрын

@@mr.cargill Thank you for taking the time out! I just sent it!

greeeeat

@RSMITH-sp2rt

4 жыл бұрын

good comment

@RSMITH-sp2rt

4 жыл бұрын

you should subscribe

Long process ....we can use fillet command instead of stretching line

@mr.cargill

3 жыл бұрын

Yes Mathew that is indeed a quicker way of doing it.

Show the valley and ridge board

@mr.cargill

4 ай бұрын

The ridge is shown and this is a simple hip roof so there are no valleys. Here is a link to a video that explains how to draw the ridge details kzread.info/dash/bejne/kWR9yqqzn8-xmLg.htmlsi=1CsWl5glDBAF448m

why didn't you just fillet the lines instead of extending them and trimming them

@mr.cargill

3 жыл бұрын

Not sure exactly which part of the video you are referring to but there is more than way to do a lot of things in AutoCAD and suggestions are always welcome so thank you Josh.

Why don't you have Hip Gurder Trusses?

@mr.cargill

Жыл бұрын

This is a simple hip roof design

I need a roof are you still doing it

@mr.cargill

2 жыл бұрын

Good day. Yes.

@mr.cargill

2 жыл бұрын

email me dontaecargill@gmail.com

exam in 3 hours. give thanks 🙏

@mr.cargill

2 жыл бұрын

You're welcome. How was it?

f enter= fillet

@mr.cargill

3 жыл бұрын

Yes sir that is indeed the shortcut

how about a flat roof

@mr.cargill

3 жыл бұрын

For the flat roof you will draw any rafters, just draw the roof outline. When you do a section through the roof you will have to show the steel work

@jasonhall9588

3 жыл бұрын

@@mr.cargill ok thanks much. so that means I would not add a concrete or steel hatch

@mr.cargill

3 жыл бұрын

@@jasonhall9588 No, that would be shown in the detail drawing

Y didn’t you jus turn off the floor plan

@mr.cargill

4 жыл бұрын

The floor plan has to be represented in the roof plan in broken lines and also you need the outer walls of the floor plan to get the overhang of the roof. Turning off the floor plan after getting the overhang could be done though.

TD tomorrow '-'

@mr.cargill

3 жыл бұрын

How was it?

NICE VIDEO, TOO LOW THO

@mr.cargill

10 ай бұрын

Thank you for the feedback. Really appreciate it