Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) kzread.infoUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

Thank you for a very clear and concise video

Wonderful job of explaining the steps with gestures!!!! Thank you for the video! Internet needs more of you!

finally the teardown for my model. thanks a million

@shingookala3993

3 жыл бұрын

subscribed

Unga video ynaku romba payanula oru video sir thank you sir ❤❤🎉👌😍😍

Wow, First video of this A/C! Congratulations

Appreciable.. I was looking for such video for my aircon.

cheers, I have an older model but I'm sure it's 90% similar!

Wow the most definitive guide on youtube. Great video

you deserve more views great content...thumbs up to you

Appreciate the video. Helped me open up my wall unit. Thanks

Thank you! thank you! thank you! thank you! thank you! thank you!

Great work and very useful! I have the same model. Thanks for sharing.

Hi, is there any ways to remove the blower without detaching the whole casing? The design is damn stupid from Daikin. Very difficult to remove blower

What is the cable connection to the coils for? Mine seems rusty already.

很有用，支持

That's freaking awesome man but can you tell me where is the so-called drip tray where the condense water it's collected and then and drained away? it's extremely hard to recognize, which part is that? 8:20 is that the condensation water pipe? and how do you open the tray to thoroughly wash it out? thank you!

Thanks for sharing this video

any way to remove the blower without dismantling the whole cooling coil?

super merci beaucoup

Hi...mine is similar but i cant pull out the fan motor..it like stuck..do i need to pull with some force?thx

Pancen oyeee.... 👍

Excellent

Nice video 👍

Thank you

Thanks 👍

I miss this daikin design.

Thanks for this video. I have this model at home, and I'm trying to figure out why the air is not blowing strong.

@penofficialsg

3 жыл бұрын

either coil clogged or blower dirty

感谢

So to remove it of the wall i have to do all this???? Please tell me thats not true

Dear Sirs, thank you for your video. I own a Daikin FTXS25K2V1B that it is a pretty similar machine but it seems that the water collector tray is not detachable like you show in this video. For this reason it is not easy for me to get the machine completely clean because the component itself is an integral part of the main plastic body. Do you have any suggestion on how to perform a proper maintenance routine on this type of machine despite the fact that the collector tray is not easily accessible? Thank you very much for your reply!

@penofficialsg

3 жыл бұрын

Take some photo of your air con email to me I take a look what you mean. Pensiewyoung@gmail.com

@sweeyong7756

2 жыл бұрын

me too i have a ftc50nv model. the water tray cannot be removed seperately to access the blower. its seem like its one piece plastic.

@jimmyleneve4594

4 ай бұрын

Yep, that's why I'm here. Trying to figure out a simple solution to remove wheel.

Hi Sir, do u so Major Aircon servicing foe this model?

Great presentation. I have a problem with little noise during the running and awfull smell, like dead corps. Can be that because of some contact between the rotating fan and some rigid parts inside. Does anyone have such experience?

@penofficialsg

Жыл бұрын

lizard

@franci1541

Жыл бұрын

@@penofficialsg good point, there are many around in these hot days. I will check. Thank you!

mon unité intérieur de climatisation Samsung fait du bruit est ce que le problème émane du ventilateur interne du split ou des roulements du moteur ? et si le problème émane du moteur est ce que je remplace le moteur ou je remplace les roulements du moteur?

Hi bro, mine the same model but there is excessive condensation, tried chemical overhaul - no use. U got any aircon guy to intro?

@penofficialsg

3 жыл бұрын

you try take a short video of the problem for me to understand

My daikin ftk25tv1w 2.5HP indoor unit I try pull blower out to left so strong after unscrew its fan motor connector screw still don't come out, know how?

@penofficialsg

Жыл бұрын

We dont have this tv1w model here

There is a small metal clip on the blower wheel. I forgot to install it back after cleaning. is it important? what does it do?

@penofficialsg

Жыл бұрын

if have need put back the same position. if not also ok too. i believe it a balancing thing

Does a Daikin aircon usually lasts for 15, 14, 13 or 12 years of usage before being eventually replaced by a new one?

@penofficialsg

2 жыл бұрын

non inverter over 12-15year can. inverter 11years +/- can but after 7 years may need some repair

@Tsiikki

10 ай бұрын

You need to clean the scroll every year, stupid design..

Thanks for sharing

@penofficialsg

Жыл бұрын

Thanks for watching!

Thanks for sharing this video master

Supar

Pls do for FTKS50

Thanks, this is the same type in my home

@penofficialsg

3 жыл бұрын

please subscribe will come out a video how to DIY chemcial wash soon

Air conditioner cleaning I vote we demand Air conditioner manufactures design the equipment they sell to be more user-friendly and serviceable. Clearly all the split type air conditioners you see today are not designed for easy cleaning or easy maintenance. These systems need to be cleaned and maintain on a regular basis. How long do you think those metal screws into plastic housings housing will last before you see failure. Then what, where will you buy replacement parts? Come on Daikin, make your products the best they can be!

@penofficialsg

Жыл бұрын

All manufacturers is very helpful. Gave us technician jobs. And they have aftersale product to sell.

@nelsondog100

Жыл бұрын

@@penofficialsg but soon the consumer has to buy again. Money does not grow on trees…

Good job 👍🏻

Air conditioner is heavy or no?

can you explain for ftc50nv14 model.

@penofficialsg

2 жыл бұрын

Singapore we don't have this model ftc50nv14.

@sweeyong7756

2 жыл бұрын

@@penofficialsg its same as ftx. i could not get tje blower to release from the motor after i removed the screw within the blower. not happy.

The part air comes out is broken where can I buy?

@penofficialsg

Жыл бұрын

DAIKIN

Hi I have a question, are these series Daikin still producing.

@penofficialsg

3 жыл бұрын

Yes

@sanelridjanovic3344

3 жыл бұрын

I have red about this model that is durable with no problems, and which series is this Comfora, Proffessional or something like that, and greetings from Mostar southern city in Bosnia, I was thinking to buy a Daikin that model or Fujitsu.

I am getting C3 error code in Daikin inverter split AC 1.5 ton. how can we solve it please tell me about C3 error code

what a terrible design. the daikin factory should know that blower fan coil needs to be cleaned regularly and thoroughly. spraying jet washer just isn't enough, it needs to come off. very good step by step video nonetheless.

@asiacuisine4869

2 жыл бұрын

agree 101%. terrible design.

@azka9075

Жыл бұрын

I feel like they designed it this way to make customers have to regularly pay their technicians to come and service the unit...they are scummy ill never buy a daikin again, their technicians are there to squeeze you dry.

Didn’t show how to remove the roller

the fact the blower is the 'last boss' says much about the company's ethics, or the lack of it.

@penofficialsg

3 жыл бұрын

ok la just 1 screw only. newer model are much more easier to remove

@3cent

3 жыл бұрын

@@penofficialsg kzread.info/dash/bejne/oXWpzs2Ppq-zdKQ.html for comparison purpose. Glad to know newer models easier to remove.

@chestertan3029

2 жыл бұрын

@@penofficialsg i think it's the fact that you have to dismantle the entire air con before you can actually access the blower to remove and clean it thoroughly. When it is mounted on the wall i think it takes so much more time to actually try to remove just the blower for washing. Nevertheless thanks and great work in providing such an informative video with the clear steps! :)

The king of professional .

@penofficialsg

Жыл бұрын

thank you

make video daikin ftc 20 nv please bro like same this video

@penofficialsg

3 жыл бұрын

the model you mention not from local Singapore. we dont have the model here. you send me one unit please

you should have at least show to us the steps on how to assemble it back rather than fast forwarding it without any information