How to disassemble Athearn Genesis Trucks\wheel sets
Take apart Athearn genesis drive trucks and gears works for some proto 2000 units
Жүктеу.....
Пікірлер: 33
@WesternMichiganRailway7 ай бұрын
Thanks for posting this video. I wanted to take some truck sets apart on my ES44 to do some weathering and didnt want to mess it up. Thank you!
@pieseasmyseas
7 ай бұрын
Your welcome I'm getting back into the hobby so subscribe and stay tuned for more
@Crookedriverandeasternrr4 жыл бұрын
Thanks for the how too. Learned the hard way to repair these. After waiting 4 months to get 2 new units back from athearn for loose truck wires. I did a video a few months ago on replacing scale trains trucks and wheelsets. !👍
@pieseasmyseas
4 жыл бұрын
I'll never send anything back just because of that 4 month wait
@kenamosjr.bo_514 жыл бұрын
Nice how to video. I have a couple old Genesis engines from old days and was contemplating whether to keep, after seeing this I think I'll clean them and weather them and use now. Thanks for sharing.
@pieseasmyseas
4 жыл бұрын
If you need any help I'm on Facebook
@chazco4 жыл бұрын
Great how to. I hope it helps many modellers maintain their fleet.
@pieseasmyseas
4 жыл бұрын
Thanks for the feed back happy you enjoyed it
@rln9704 ай бұрын
Thank you - great video
@pieseasmyseas
4 ай бұрын
Your welcome glad to help
@jolietrails4 жыл бұрын
Thanks, this was of great help. Best of luck and health to you.
@pieseasmyseas
4 жыл бұрын
No problem happy I could help if you have any questions feel free to ask
@Chesticus Жыл бұрын
Thank you!
@moderndaythornsagain3 жыл бұрын
Very nice video! Thank you for sharing what you learned!
@pieseasmyseas
3 жыл бұрын
It not necessarily what I learned it what I know
@dennissartor87272 жыл бұрын
Thanks for the video. I've been wanting to look at the trucks of one AG loco I have but wasn't entirely sure how to go about it. I definitely didn't want learn the hard way as you say. 😀
@northerncountryrailroad89394 жыл бұрын
Nice video! -Brock NCR
@pieseasmyseas
4 жыл бұрын
Thank you
@leonsmoker93154 жыл бұрын
Hello, could you give me any idea how to give a SD 40 more side to side motion other than filing the main fram
@pieseasmyseas
4 жыл бұрын
I'm sorry it took so long to answer you I'm not 100% sure what your asking. If you're referring to the side to side swing of a loco then i don't know if i can help but will be happy to try
@michaelcudby787
Жыл бұрын
Sorry, but there is no other way.What make is it? Athearn,Kato?.....is this to be able to turn sharper corners?
@TheStarforce2 Жыл бұрын
is this the same for F-3 units?
@pieseasmyseas
4 ай бұрын
I think so.
@csxns Жыл бұрын
I have several Genesis locomotives and the trucks are warped.
@pieseasmyseas
Жыл бұрын
I would have to see them my self to see if there is any hope for them
@csxns
Жыл бұрын
@@pieseasmyseas I just keep them on a shelf I more so run Scale Trains locomotives .
@usacitizen1000 Жыл бұрын
I bought 2 BNSF models of these a number of years ago,...both new ones. Only a couple of days ago I got them out to test on my new layout. They both derailed EXCESSIVELY,....on brand new engines from Genesis !! If I can't get satisfaction from Athearn, I may have to never buy another of their product,...defective design. Is there a possibility another truck product could be substituted??
@pieseasmyseas
Жыл бұрын
It's most likely your rails. 10 to 1 yo7 have only been running 2 axel trains and your having problems with 3 axel trains.
@usacitizen1000
Жыл бұрын
@@pieseasmyseas Its not my rails as I have run 3-4 othere 6 axle locos over these same tracks WITHOUT derails
@pieseasmyseas
Жыл бұрын
@@usacitizen1000 well I thought the same thing for a long time. It could be a cut lever on a Kaydee cuppler it could be a lot of things but I will still say track work. I wasn't shur until I started taking slow motion footage and watching the derails that I realized that some trains have more up and down movement in the wheels and some have more of a flange on the wheel. A 2 mm flange in 1:87 translates to 1.5 inches when scaled up so if your train wheel move more than the flange height, I would be the same as if a real train jumped the rail at 2 inches.
@farmerdave79653 жыл бұрын
What a nightmare.
@pieseasmyseas
3 жыл бұрын
Easier than you think
@michaelcudby787
Жыл бұрын
Yes.A bit more involved than Athearn RTR/bluebox, but all Kato ,Atlas, Proto, Genesis, have exactly the same style,but once you understand how they disassemble, they become easy enough.
Пікірлер: 33
Thanks for posting this video. I wanted to take some truck sets apart on my ES44 to do some weathering and didnt want to mess it up. Thank you!
@pieseasmyseas
7 ай бұрын
Your welcome I'm getting back into the hobby so subscribe and stay tuned for more
Thanks for the how too. Learned the hard way to repair these. After waiting 4 months to get 2 new units back from athearn for loose truck wires. I did a video a few months ago on replacing scale trains trucks and wheelsets. !👍
@pieseasmyseas
4 жыл бұрын
I'll never send anything back just because of that 4 month wait
Nice how to video. I have a couple old Genesis engines from old days and was contemplating whether to keep, after seeing this I think I'll clean them and weather them and use now. Thanks for sharing.
@pieseasmyseas
4 жыл бұрын
If you need any help I'm on Facebook
Great how to. I hope it helps many modellers maintain their fleet.
@pieseasmyseas
4 жыл бұрын
Thanks for the feed back happy you enjoyed it
Thank you - great video
@pieseasmyseas
4 ай бұрын
Your welcome glad to help
Thanks, this was of great help. Best of luck and health to you.
@pieseasmyseas
4 жыл бұрын
No problem happy I could help if you have any questions feel free to ask
Thank you!
Very nice video! Thank you for sharing what you learned!
@pieseasmyseas
3 жыл бұрын
It not necessarily what I learned it what I know
Thanks for the video. I've been wanting to look at the trucks of one AG loco I have but wasn't entirely sure how to go about it. I definitely didn't want learn the hard way as you say. 😀
Nice video! -Brock NCR
@pieseasmyseas
4 жыл бұрын
Thank you
Hello, could you give me any idea how to give a SD 40 more side to side motion other than filing the main fram
@pieseasmyseas
4 жыл бұрын
I'm sorry it took so long to answer you I'm not 100% sure what your asking. If you're referring to the side to side swing of a loco then i don't know if i can help but will be happy to try
@michaelcudby787
Жыл бұрын
Sorry, but there is no other way.What make is it? Athearn,Kato?.....is this to be able to turn sharper corners?
is this the same for F-3 units?
@pieseasmyseas
4 ай бұрын
I think so.
I have several Genesis locomotives and the trucks are warped.
@pieseasmyseas
Жыл бұрын
I would have to see them my self to see if there is any hope for them
@csxns
Жыл бұрын
@@pieseasmyseas I just keep them on a shelf I more so run Scale Trains locomotives .
I bought 2 BNSF models of these a number of years ago,...both new ones. Only a couple of days ago I got them out to test on my new layout. They both derailed EXCESSIVELY,....on brand new engines from Genesis !! If I can't get satisfaction from Athearn, I may have to never buy another of their product,...defective design. Is there a possibility another truck product could be substituted??
@pieseasmyseas
Жыл бұрын
It's most likely your rails. 10 to 1 yo7 have only been running 2 axel trains and your having problems with 3 axel trains.
@usacitizen1000
Жыл бұрын
@@pieseasmyseas Its not my rails as I have run 3-4 othere 6 axle locos over these same tracks WITHOUT derails
@pieseasmyseas
Жыл бұрын
@@usacitizen1000 well I thought the same thing for a long time. It could be a cut lever on a Kaydee cuppler it could be a lot of things but I will still say track work. I wasn't shur until I started taking slow motion footage and watching the derails that I realized that some trains have more up and down movement in the wheels and some have more of a flange on the wheel. A 2 mm flange in 1:87 translates to 1.5 inches when scaled up so if your train wheel move more than the flange height, I would be the same as if a real train jumped the rail at 2 inches.
What a nightmare.
@pieseasmyseas
3 жыл бұрын
Easier than you think
@michaelcudby787
Жыл бұрын
Yes.A bit more involved than Athearn RTR/bluebox, but all Kato ,Atlas, Proto, Genesis, have exactly the same style,but once you understand how they disassemble, they become easy enough.