How to derestrict Yamaha FZ6R
Автокөліктер мен көлік құралдары
hi guys, this video is a tutorial on how to derestrict a Yamaha Fz6r. Fz6r generally comes restricted for L and P platers also knows as LAMS approved. but once you have your full license you can have the restriction removed to unlock the full power of that 4 cylinder 600cc engine.
link to the derestrictor is below
goo.gl/HhxzQq
~-~~-~~~-~~-~
Please watch: "How to use sonoff wifi switch with google home"
• How to Use Sonoff Wifi...
~-~~-~~~-~~-~
Пікірлер: 143
If you guys are wondering why i didn't just cut the plate, please skip to 11:15 to see why i didn't just cut it. be safe on the road : )
@afkarcis
5 жыл бұрын
robinkhaira1 Just wonder if you could show me where CPS located
@robinkhaira1
5 жыл бұрын
@@afkarcis what do you mean by cps mate?
@aaronmenchinger
5 жыл бұрын
Was just going too say how much was that because it looks the exact same and could have just cut the leg off. Did the throttle body not open all the way before? Did you notice it opens fully with the new part?
Good to see someone having a go and learning to work on their bike themselves but one bit of advice..... Don’t use power tools on security torx bolts like on the throttle cable plate. I cringed and yelled no at the screen, quickest way to strip the heads of them out. A little 1/4 drive ratchet is perfect for them.
Did mine today and bought it from the same supplier. All I can say is farrrrrrrrrk me!!! The difference after riding restricted is amazing!! The way it is designed! Incredible. Thanks very much for the video and link. It was ok to ride before, but it is a GREAT bike to ride now. 🙌
@MikeDMays
4 жыл бұрын
Rhys Hiscox I was thinking of doing this. So it is worth it? My bike seemed fast till I was used to it and I was curious if it would give me that oh shit feeling again lol.
@rhyshiscox9386
4 жыл бұрын
@@MikeDMays I believe it will give it back. Like I mentioned, it was ok to ride before. Now it's great to ride. I recommend doing it. It really did feel like a shame to have it tamed as it was. The high end power now really pulls.
@rhyshiscox9386
4 жыл бұрын
@@MikeDMays and for the cost of the throttle plate.. Best mod you could do to increase the fun. 😊 👌 That's if you're in Australia and it's still restricted. You'll tell by the minimal throttle twist.
@rhyshiscox9386
2 жыл бұрын
@JuicyDeucey88 if by title you mean registration papers, no I don't believe it does, not that I've seen. It's up to the police to make that connection and be aware of LAMS approved bikes.
@MikeyR-cv2bp
Жыл бұрын
Where the link?
Very informative video mate thank you
Thanks for the great video. I have an XJ6 with the same restriction plate. I was suggested to cut the long piece on the stock plate as others were selling the de-restrictor plate for $100. I will be getting on to your guy right away!
@robinkhaira1
6 жыл бұрын
awesome, i am glad i could help mate :)
@Qfly9
6 жыл бұрын
hey what's up man? Could I do that same with a 2009 and get the same power?
@digitalwater20
6 жыл бұрын
I am not sure on 2009 sorry. I have a 2012 XJ6N and the restriction plate is the same. Have a look on your bike near the trottle body and see if the plate looks the same i.e. the throttle is stopped from turning at only about 40% and the plate has the same holes for the screws and a small hole for the pin. Mine has T25 tamper proof screws. Btw the power is always there but the stock plate on a learner version of the bike stops the throttle from opening all the way to use all that power. This derestrictor plate doesn't have that extra piece of metal that stops the throttle so you can turn all the way and use the bikes available power.
@robinkhaira1
6 жыл бұрын
hey mate. yeah as long as your bike is Lams restricted. best thing would be to look at the plate to see if you have the same one. if you have the same restriction, then you are in luck :)
Lol I was always wondering why my bike was pretty fast compared to what I hear about the bike, took it apart and found out this parts already installed lol
During a long winter, a porting and a block shaving job, an aftermarket pipe, Ohlins shocks and you have a very sporty touring bike but without the insurance or the licence plate price of a sport bike.
thanks for the effort mate! awesome
Can you just remove it and leave it or do you have to put the new part in?
Why can't the tab just be cut off to shorten the tab??? I would assume it would work
Did this honestly make any difference? I can’t see how that did much of anything “performance wise”
I cant find it in ebay, do u mind sharing the link for derestricter
4:07 Deez Nuts 🥜
@robinkhaira1
5 жыл бұрын
Hahhaha never notice that before.
Very informative!
where can i find a de restrictor plate cant find one anywhere
Where can I find the part?
Great stuff thanks for the video, doing that to mine for sure 😊
@robinkhaira1
Жыл бұрын
Yeah was one of the best thing i ever did to my bike.
Very helpful thanks
will it allow the bike to Whilie easier?
Could you send me the link to get this plate
Can anyone please tell me the name of this song ?
Aight I'm going to the garage to check lmao I got a 2014 fizzer and it's fast af so that makes me wonder, I'm also really lightweight so it hauls ass with me on it lol
No video of the speed?
I also have the European version, the XJ-6. It is 2011 and I honestly don't know if mine has the restrictor... Will check it out for sure.
@robinkhaira1
6 жыл бұрын
here in austraila they some restricted. but if it doesn't feel fast then its probably restricted lol.
Do you guys know if the United States version is also restricted? I'm not sure but I thought it might be different in every country.
@elites3114
5 жыл бұрын
its not
Thanks so much for the video man! Do you know the difference in power between restricted and unrestricted for the fz6r?
@robinkhaira1
6 жыл бұрын
hi mate, no i don't have any measurements. but i could feel about 60% more power. the increase in power is amazing before de-restricting it felt like i was riding a 250, which is what the restriction is supposed to do anyway.
Hey bro I got to tell you this I don't have the same plate that you have but I did adjust my throttle cables a a little bit and I got to tell you I see so much more different performance
@robinkhaira1
Жыл бұрын
Glad you are enjoying your new found performance mate. Be safe on the roads
I mean from what I see you could take a angle Grindr to the original and take of the the notch. (Not a professional do your own research)
Hey mate, great video. Is the restrictor plate the only restriction on the lams fz6r? is their an ECU remap or any other mechanical restriction? Thanks
@markwood9387
3 жыл бұрын
I'm wondering the same thing
@boosted1328
3 жыл бұрын
@@markwood9387 from what I gather... the plate is the only thing that stands in the way of it being 100% derestricted. The ecu however has been retuned for a more linear and shorter rev range than the 03-05 r6 (the engine it came from). So practically with a tune and a few mods it would practically be very similar to the r6 (older model, obviously)
@robinkhaira1
3 жыл бұрын
there is no ECU restriction mate, only the plate.
Link is dead, got a new one? Cheers.
why didnt you just cut or grind the plate down and then re-install it?
@robinkhaira1
6 жыл бұрын
MR because they are expensive and hard to find. If you need to sell your bike again the new buyer might need it again.
I just saw your video. I was trying to get the information that you supposedly left about the restricted plate. You said that you had information on where to buy them. I would love to get that info off of you so I can buy one myself. If you get this and you still have the information that would be awesome as I also have a 2009 FZ6R. Thanks
@robinkhaira1
2 жыл бұрын
Hi mate, i used to have that info of the ebay seller. But seems like he is no longer selling it. If you can't find it anywhere then try just cutting off the little notch with a saw and you should be good to go.
Do you think the bike will be pretty fast for someone my size I'm 6ft and 220lbs
@robinkhaira1
4 жыл бұрын
yeah mate, its pretty powerful. you'll love
What year is this bike. Are all years of this model the same.
@robinkhaira1
6 жыл бұрын
mine is 2011 and process is the same on all years
Hello Thanks for the video Can you send a new link to the derestrictor
@GEKYUME1759
3 жыл бұрын
Go on ebay, and look up "fz6r derestrictor" 👌
Hey mate wondering if you still have the plate. Either one id like to purchase it
@robinkhaira1
Жыл бұрын
Hi mate, no i gave the other plate when i sold the bike and unfortunately the ebay seller has stopped selling them. You can just cut the notch off and you'll be able to unlock it.
Where can I buy this part?, what's is it called?
@robinkhaira1
6 жыл бұрын
Javier Amaya Marquez there ia a link in the description from where i brought it from. Its called derestrictor
Is bad for the engine if I do that on mine?
@robinkhaira1
5 ай бұрын
No its not mate. It's designed for that power, but just locked due to government regulations for L plates approved.
Hi Buddy, where did you buy this part and what did it cost?
@robinkhaira1
2 жыл бұрын
Brought it off ebay for about $30
".... loosen deez nuts...." I usually just go over speed bumps really fast. That does the trick!
@robinkhaira1
Жыл бұрын
Lmao
All of the links do not work anymore that are all in the comments and I looked it up on eBay and no luck can you please help me find the part please ! I know this video is super old
@robinkhaira1
Жыл бұрын
Yeah sorry mate. That seller has stopped selling it, only thing i can suggest right now to may be cut the notch off with a metal saw
@anthonypimentel7986
Жыл бұрын
@@robinkhaira1 okay for sure thanks for the reply
Is this engine the same as on r6? And has anyone done this on a '06 r6/fz06?
@sanxi34
3 жыл бұрын
IT has the same engine as a 2004-2008 R6 but detuned. The original FZ6 had 78ps and then they de-restricted it for the S2 model with 98ps. This one the FZ6R (or the XJ6 diversion here in Europe) is restricted again to make it emissions and A2 compliant. You may gain some power. but not the full 98ps since the rev-limiter is at 12K and the R6 and FZ6 S2 rev to 14K
@magnum4405
3 жыл бұрын
That's a European restriction. The bike went from 34 to 78 hp.
Anyone know where to get these anymore. I've looked everywhere and can't seem to find them. Even clicked the link in the description.
@robinkhaira1
2 күн бұрын
Sorry mate, the Seller had stopped selling them now. At this point you can just buy a small cheap metal saw and cut that little part off to release the full throttle
@TheKing-nj9ic
2 күн бұрын
@robinkhaira1 yeah I'm gonna buy an extra plat and just cut that so I always have an oem one
R6 motor has different cams than the FZ6... Different sprocket, etc...
Now if only we could get a more usable rpm range without needing a speedo healer..
Did you gain top speed? How much?
@Ax.Simard
3 жыл бұрын
It only change acceleration
Can you send me the link to the derestrictor plate?
@robinkhaira1
2 жыл бұрын
Hi mate, had a look but looks like seller is no longer selling them. You can also just cut the little notch and it'll do the same job
Are you saying that this gives it more power?
@robinkhaira1
6 жыл бұрын
well it unlocks the power, from factory bikes comes with that restrictor to make it learner approved. but if you remove the restriction then it unlocks the full power.
@robinkhaira1
6 жыл бұрын
not sure mate, i am from Australia, USA has different laws when it comes to L plates.
How do I get one ?? I can’t find it anywhere
@robinkhaira1
4 ай бұрын
It's no longer being sold mate. One thing you can do is that you can cut off the little knob on the bottom so throttle can turn all the way.
Is this plate still available anywhere? I can’t find it
@robinkhaira1
Жыл бұрын
Naa mate, last i checked the seller is no longer selling them, only solution now is to cut the little notch with a saw.
@derrick.l1870
4 ай бұрын
@robinkhaira1 yeah I was just about to ask where to get that part from, but I read all the comments and yeah, I was thinking about just cutting mines too. I mean, they look exactly alike. One just has a leg on it.
Is this on America’s Verson ?
@MrEtherguy
5 жыл бұрын
I don't think so. The restrictions are for different levels of drivers' licenses in other countries (think of license grades in Gran Turismo). The US only restricts based upon emission standards, not the class of drivers license. And even then, emissions standards for motorcycles in the US are pretty lax except for the necessary catalytic converters (and in California, a charcoal canister for fuel vapor).
Does every Fz6R have this?
@drakeeldevil6285
3 жыл бұрын
Yeap bro
I cant beat 750cc on my 2012 FZ6R i had restrictor removed also i can ride wheelies now in 2gear for longer than cops let me! Lol Before power was kinda dog on bottom & good on top so i was just chase them out! Now foot on back break cause DON'T RUN OUT POWER ANY MORE! Right robinkhaira1 its a Beast now! Nice bike bro mine black tank but red/black also! just seen this 2017 you still on here? You got copy Robin Holla at you from the GreatLakes were tons Hot Girls are and No dam shark's to eat a guy in are waters!
@lennyjames1309
3 жыл бұрын
@David Ciabattoni Trump2020
@lennyjames1309
3 жыл бұрын
@David Ciabattoni Its Bord out so not stock!
Well I immediately went to the garage after I seen the video remove the fairing of the motorcycle just to find out that is being cut off already . that's why this bike is fast I took a picture of it but I don't know how to upload it but yeah its just been cut off nothing fancy
@robinkhaira1
5 жыл бұрын
haha at least you know for sure now that it's unlocked :)
Hi, is it legal to derestrict your bike here in NSW Australia? Because my rego paper says 400cc now if I derestrict it then the bike won’t comply with how it’s registered with RMS
@lmcclellan
5 жыл бұрын
I don't know about Aussie Law's, but I do know that if you did this to your bike, you should be legal still. You aren't changing the cc's of the bike, just de'restricting the throttle so you get more turn at the handle thus giving you full throttle of the 400 cc bike. Easy peasy, legal eagle.
@FuriousRider99
5 жыл бұрын
L Kaan it’s a 600cc bike the rego paper reads 400cc due to the restrictor I assume. If derestricted it’ll then be full power 600cc.
@lmcclellan
5 жыл бұрын
@@FuriousRider99 Here's the thing, it was always using the full power of the engine, the resistor just stops the throttle from opening completely, thus keeping you from reaching the potential max speed of the engine. I have trimmed them down before and I know first-hand that there is NO power difference, only a max top speed difference. My bike will hit 160+ mph now and before it'd only hit about 140mph. Take off speed and torque remain the same. If the title says 400 but the bike is 600, something is off I'd say. My title reads correct and it also had the restrictor.
@multitrikz3240
5 жыл бұрын
@@lmcclellan Not true, The majority of the power is in the higher RPMs the restrictor stops you from entering said RPMs therefor you are not using the full power of the bike just the low end power.
@lmcclellan
5 жыл бұрын
@@multitrikz3240 put it in neutral and see if you can red line it, if so you're getting full power. Mine was restricted and could red line, but wouldn't hit top end speed. Now it hits top end speed.
What year model is your bike?
@robinkhaira1
5 жыл бұрын
Its 2013 mate
@chrisclarke1965
5 жыл бұрын
I wounder if it's the same process for the 2011 model
JUST A HEADS UP. had an xj6 in the uk for 5 years unrestricted and it wont do 100kph in first gear, that's bullshit. its about 80kph (50mph)
Throttle body doesn’t affect gearing rpm and tuning. The engine itself If still detuned. Informative video however please fact correct
@robinkhaira1
Жыл бұрын
I never implied that tuning is changed mate. It's simple opens up your throttle to full and lets your bike to go to higher RPM. Please watch the video carefully before leaving such comments. Have a good one
Are u love apple?
Or you could just cut the tip.
did you notice the difference? like really notice the difference?
@robinkhaira1
6 жыл бұрын
notice was so obvious that if it was a rock and hit me in the face, it would take my head clean off. :)
@roadkillhayden
6 жыл бұрын
thats what i needed to hear to make up my mind if i should one. Thanks mate!
@robinkhaira1
6 жыл бұрын
well your bike is restricted at 250cc, by doing this you're essentially unlocking 350 CC's more.
@roadkillhayden
6 жыл бұрын
is this the case with all lams bikes over 250cc? i had a v-star650 that had been derestricted and got it to 180kms and felt like it would have gone faster if i let it.
@robinkhaira1
6 жыл бұрын
yeah if your engine is bigger than 250 and its lams approved, then it would have a restrictor on it, i heard some kawasakis have electronic restrictor, which can only be removed by dealers and they charge you a kidney for it.
For resale value he thought it would be kind? to give the new rider a slow bike
@robinkhaira1
6 жыл бұрын
not a slow bike bud, its cuz people with L or P plates can't ride this bike without restrictor, i ll give them the original part with the bike, its up to them whether they want to install it or not. you can buy derestrictor easily but very hard to find the restrictors again.
@lmcclellan
5 жыл бұрын
@@robinkhaira1 couldn't you just tack weld it back if needed? That's what I'd do, then grind it clean and presto, like new.
@robinkhaira1
5 жыл бұрын
@@lmcclellan i don't have a welder mate.
@lmcclellan
5 жыл бұрын
@@robinkhaira1 Ah yes, that could hold you up a bit. In that case I'd mend it using jb weld or epoxy. Also you could take it to a local muffler shop and they'll usually weld just about anything you want for a few $. Hope that helps someone, cheer's.
@robinkhaira1
5 жыл бұрын
@@lmcclellan nice idea, but way too much hassle. This only cost me $30.
So why not just cut it instead of buying a new one...
@yusabayrakoglu3824
Жыл бұрын
:D
hey dude,.. you wasted money on that,.. all you had to do was take the old one off and cut it like i did,. i cut the leg off and that was it, saved my money
@robinkhaira1
6 жыл бұрын
i know i could have done that mate, but i wanted to keep the original one because i am going to sell my bike, i always keep changing my vehicles. so i wanted to keep it in case the buyer wanted a LAMS approved bike so they can change it. and restrictors are very rare to come by.
@RideAsOne
Жыл бұрын
Hey, Were you able to cut that piece without removing the plate? It looks possible with a mini cutter/saw tool.
@avdodurgutovic2842
4 ай бұрын
Hey guys so I’m trying to get one but can’t find them anywhere if I had to cut it where would I cut it
@Sway392
2 ай бұрын
@@avdodurgutovic2842i heard on the FZ6 forums you could just bend it
@dolla388
Ай бұрын
Does the 2014 one have one as well ?