I got a Gomexus knob for my Saragosa. I can't say enough good things about it. Holding up to all the salt and BS I put it through and feels better and looks great.

I don’t know, brother. Looks like someone swiped a steering wheel knob off a Cuban taxi

Thanks for the pointers! Definitely going to swap out the bearings in my Gomexus for the factory Daiwa bushes, so much nicer! Less buggerizing around seating up the shims too!

I saw you link those knobs the other week so I ordered some and there 1000 times better than the stock shimano "t-knob". I appreciate you putting this product on my radar.

@TackleAdvisors

3 жыл бұрын

I hope you enjoy em!

I broke my handle today while fighting a tog. I ordered a replacement from Amazon. Wish I seen this sooner. And I did land him. 17.5" right into the cooler.

@troynjpoolplayer6604

3 жыл бұрын

back to the drawing board. The handle i purchased from Amazon is a pos. It stated it was for my BG4000 but i can see after the install its not going to hold up for the beating I put on it Togging. Wasted 20.00.

Thank you.

You should make a video of all the reels or combos that you recommend from all budgets : )

Is there a video for how to improve the slack/travel on the T-shape knobs on the LT wheels?…

Sweeet!! Looks like you took a tool from my book!! Awesome job! If there’s anyone that I would want to share gomexus knobs with it would be with you!! I wonder if I inspired you at all 🤔🤔

@TackleAdvisors

3 жыл бұрын

Hey man! I've know about gomexus and have put em on friends reels awhile back... I have purchased I think 7 different products of theirs and have zero complaints 3 handle setups and these 2 knobs most recently.

@WestCoastFloridaFishing

3 жыл бұрын

Tackle Advisors oh yeah!! You had the double handed paddle in the past and some other stuff like the kick stand too I thought.. hmm.. oh yeah how do you feel about me sending you a Vanford for a collaboration in someway maybe have you break it down or something? Idk something to think about

I shimmed mine with a rubber braces band, has a nice bouncy, but still free spinning feel now. It's not standard, but works for me....

I just got my BG8000 . How can I change handle right to left ?? Thanks

Yes but pleaseeee tell us which gomexus power knob it fits to mg mq??? I mean is 35 mm 38mm or 40 mm..

@jasonvigeant8893

3 жыл бұрын

Did you ever find out.. just got the 6000 mq an I dont know the size thx

@tsalis2

3 жыл бұрын

@@jasonvigeant8893 no i havent found yet...

What size knob for the bg mq 10000?

A few Vanford reviews already out there but really looking forward to yours.

Hello there. I wanna buy a reel for blue fish. A reel for heavy duty. Which three reel do you advise? So i can buy one that fits my budget.

Can someone please answer this question: What are the top 5 best saltwater spinning reels for under 150, preferably in order. Thanks in advance to anyone who gives their list, especially you tackle advisor :)

@robertdejonge3607

3 жыл бұрын

Ok, not sure about the price, depends of size probably, but this would be my list: 1 Shimano Spheros 2 Okuma Azores Blue 3 Shimano Stradic (5000) 4 Penn Spinfisher 6 5 Daiwa BG

@TommysRaw

3 жыл бұрын

Robert de Jonge love this list Robert thank you!! Quick question, can you tell me why spheros comes to #1 on your list

@robertdejonge3607

3 жыл бұрын

@@TommysRaw You're welcome, the reel is completely sealed against seawater intrusion, it has hagane gears with x-ship construction (check out shimano website for explanation) basically its a saragossa with one less bearing ;). also check out Alan Hawk website for reel reviews. Good luck!

I kinda helped get Gomexus to the German market, got some stuff from them in return. Pretty neat stuff honestly. My little 1k Stradic Ci4+ looks like a Transformer now :^)

@TackleAdvisors

3 жыл бұрын

Cool! They contacted me about future content resulting from this video... (gomexus Japan... Which I thought was interesting... The Japan part anyway ) I don't mind putting out knob swap vids.. But I'd want a paycheck not just free knobs lol.. They do make an excellent product

@DbaldetToShuffle

3 жыл бұрын

@@TackleAdvisors ye they make some more different products too. For example, I got a Reelstand, which is basically a pin you swap in for the counter nut (if you can call it that) so you can put your combo down without sand getting on the reel or scratching up the nice new knob :^)

Do you know if the handleknob swap for the BG Magsealed is as easy as on the MQ, or is it like on the BG standard?

Would you be able to make a video on swapping one out with the rivet? Just got myself a Gomexus knob too trying to install on my Shimano Tekota 600 (the previous generation to new, silver and gold one). Thank you for this video!!

Do you have a certain brand of berings you're buying for the handles in case you need some? Or just sticking to daiwa/shimano knob bearings? I have tried so much garbage on ebay.

@TackleAdvisors

3 жыл бұрын

The traxis 10 pack isn't horrible expect a dud or two.. But they're cheap... But shims are the most important thing.. Most bushings spin as smooth as bearings. I've found removing the lateral slop with shims is what really makes the difference

Looking at switching out that same knob on my Daiwa Eliminator. The Daiwa knob is a little oversized at both ends. To reduce some of the bulk from the ends of the knob, which size would you recommend? I'm trying to match it closer to my power handles on my ambassadeur reels.

Please check out the low profile penn reels

Please do a teardown of the Penn warfare!

Couldn’t get their handle to work or fit on my BG -MQ 2500. After 2 hours of frustration and no instructions on how or what to do next I put the stock handle back on. Won’t order from them again.

Please do full review of the saragosa

If you're going to do the Shimano Saragosa SW your going to need the 45mm or 47mm Gomexus power knob. The handle shaft is 4.7mm not 4mm. If I am not mistaken

@rebornspirit1047

3 жыл бұрын

i went with a 47mm

@sparkyishii4583

3 жыл бұрын

You must have a bigger sized reel. Cool.

Can i put a shim at the base of the knob to avoid the free play on the classic BG?

Is the BG MQ 10,000 size able to change to a gomexus 47 mm power knob too without drilling out the arm?

Penn battle 3 dx review

Is this applicable to BG16 4500? planning to change mine to power knob, thank you

Hey Scoob is it difficult to replace t handle on a Battle II 4000? I want to put on the gomexus power ball one

Great 😊

You wouldn't apply Loctite to the screw? Not needed? I like your vids.

@TackleAdvisors

3 жыл бұрын

Good point... I glossed over that... The Daiwa screw had a good amount left on it so I didn't even think about it... And yeah.. If there isn't any thread locker on it.. Definitely apply it

Daiwa BGs are not screwed on but riveted.

how do you remove the Certate LT knob?

Cool video!

can we switch the handle on the right side?

What size knob for the bg mq 8000

What are your thoughts on replacing the internal reel bearings with sealed bearings

@TackleAdvisors

3 жыл бұрын

Meh... Internal bearings..which are pretty limited... I don't use see the benefits

Hey. This has nothing to do with this vid. But do you think that shimano stradic fl. Bettet then the stradic ci4+.. for fresh water

@TackleAdvisors

3 жыл бұрын

Aside from overall weight and weight in the rotor favoring the ci4 the FL is an improvement... Vanford improves on the ci4

@wout3080

3 жыл бұрын

@@TackleAdvisors you think i should wait for the vanford ?

Hi, wanted to ask which model of brass gear set that can fit in to shimano 2015 metanium DC ?

@TackleAdvisors

3 жыл бұрын

Contact tackle trap. They had a set listed specifically for it

@ngkee2717

3 жыл бұрын

Alright,tq

Will these fit baitcasting reels?

Gomexus knobs are good knobs, don’t let the made in China full you. I’ve tried many different brands of power knobs because I hate T/paddle knobs, and the gomexus have by far the best quality knobs.

@TackleAdvisors

3 жыл бұрын

they really do..been using them for awhile...I have a pair of their carbon fiber doubles for spinning reels as well as baitcasters...40 bucks...and almost at the level of my 200$ yumeya magnesium double paddle handles...I do wish they used better quality ball bearings.....as they are hit or miss..some good some gritty/ raspy...but the knobs such as this...TOP QUALITY!

@kkainaluu808

3 жыл бұрын

Tackle Advisors I definitely agree with the bearings, they are cheap. I have a saltist 5000 and I put the 45mm Gomex knob on it, and fun fact the saltist actually has the ultra corrosion resistance brass/bronze shielded bearings in the stock T shape knob. I used those ultra corrosion resistance bearings in the 45mm Gomex knob, and damn!!! Dose it feel good. Haven’t had any problems with those bearings in the knob yet, bin dunked multiple times.

@toekneeee

3 жыл бұрын

I surprised that so many company are still making the t/paddle knobs considering how many people disliked them

@grandfishing590

3 жыл бұрын

Toe Knee T paddles are nice on small reels like 3000-4000, but not so good on sizes above. The reason for this is probably companies are too cheap to put nice handles on their reels, unless it is high end that is.

@toekneeee

3 жыл бұрын

GrandFishing really I hate them even more on the smaller reels, for smaller reels I prefer a teardrop shape or something similar to that

Please, can anybody tell me the dimensions of those shims? I need to put one in the knob of the BG 4500. Thanks

@TackleAdvisors

3 жыл бұрын

Knob comes with the shims

@gonimysh

3 жыл бұрын

@@TackleAdvisors i would like to know if i can put a shim on the base of original knob of my new BG black and gold to eliminate the free play. Thank you

Hey I'm in the market for a new freshwater spinning reel.. 4000-5000 size im considering the daiwa procyon, bg mq, shimano vanford or the stradic ci4+.. I want something thats a close to bulletproof as possible.. Thanks to anyone with advice

@Im-mv6bf

3 жыл бұрын

Just get a SW reel. You'd never have to clean it if you're only using it in fresh water

@jtmarshall

3 жыл бұрын

@@Im-mv6bf I ended up getting a diawa saltist backbay 4000

Is the handle size different on a 10k ? I just got it and want to change the handle knob.

@TackleAdvisors

3 жыл бұрын

I believe it's the same as the 8k

If you buy a handle knob like that you should get a free bowl of soup (or at least the matching nail polish). Looks good on you though.

Can you install this knob the same way on a regular BG?

@TackleAdvisors

3 жыл бұрын

No..gotta drill the rivet and buy a knob with a matching screw on stud

Hi,this reel you prefer or new Saragosa 6000? thanks

@evanhebert6114

3 жыл бұрын

thats what im trying to decide too.

Can you do a review on the bg mq 14000

@TackleAdvisors

3 жыл бұрын

Wasn't planning on it this year.. If I pick up a 14k it's gonna be for tuna.. And I want that metal drag plunger in the Gosa

You should make a video where you put canola oil or a different cooking oil in a reel and see if it works. Always wondered whether I could use olive oil in my bearings lol

I replaced a lot of my bait caster knobs with these exact gomexus knobs, just different color.

"If you are a Barbarian you can grab a fish hook"

what size is this knob?

Modify my truck or modify my reel??? Reel is def cheaper!!

Hey, is that the 38mm gomexus knob? Also was it type 's' 4mm?

Video quasi sempre non a fuoco 😲 ma poi che manopola è quella? 🤣🙈

How much this reel?

Three things to note on this installation: 1/ No drilling is required like the original/non monocoque BG 2/ This new handle is way too small to properly grip or increase leverage 3/ The new handle is butt ugly! As always Tackle Advisors is insightful and informative, but dude, I think that new handle has caused mild blindness.

@TackleAdvisors

3 жыл бұрын

Some people prefer a smaller knob... I don't need leverage on a 6k sized reel. I want easy to grip and the ability to change arm /wrist angles... It feels good but time will tell

100!!!🎆🎆🎆

I've been watching your channel for so long, I've got one thing always bothers me is that your size 0 wera driver isn't philips, it's PZ. I don't think any finishing gear is fitted with PZ screws. I know the PZ driver still works fine on PH screws, but they do fit a bit loose and shears the screw head more than the PH drivers as PH drivers will fit better. Just a thing to call, not a deal breaker or anything serious.

@TackleAdvisors

3 жыл бұрын

Here's the crazy thing... The size 0 pz Lazer tip from wera fits better than a jis Philips bit... Otherwise I'd use that... Thousands of screws... Never damaged a single head... Even painted /coated screws... Thread locked... Soft metal screws.. I've used others... Once I found this one... I stopped searching. Philips screwdriver bits are designed to cam out... I know pz bits are a bit different but the pz driver oddly won't cam out

@stin11111

3 жыл бұрын

@@TackleAdvisors Interesting to know. I must try the PZ sometime in the future as well. I do own the PH version of the Wera Lazer tip, and I do notice from time to time it leaves a bit sharpened edge on the screw head. Thanks for the tips!

I'm a barbarian most days

Or you could just buy a Penn Slammer 3 instead for the same money or less and save yourself the hassle. Still, modding reels is pretty fun too.... 😁

Well, I guess I’m a barbarian.

Como hablaaaas 🙄🙄

these guy trashes abu reels (toro beast etc) but the reels like tranx, calcutta the reel he likes doesnt even have a synchronized line guide witch all abu reels have

@TackleAdvisors

3 жыл бұрын

Synchronized level wind hampers casting performance and can be an issue if the tag ends up in the spool... I like the beast 40...the previous version wasn't very impressive... Plus abu is doyo.. Shimano actually designs and manufactures their own product..

@sp50

3 жыл бұрын

@@TackleAdvisors how does it hampers casting?? i can feel how the line grinds in high speed against the line guide (i own a calcutta d 300)....compered to abu it is almost silent since it goes with the flow

@TackleAdvisors

3 жыл бұрын

Non disengaging level wind reels have a gear on the non handle side of the spool that turns and idler that then turns the worm which in many cases is supported by bushings as well as the pawl... I have a few hotrodded non dlw reels that bomb.. But not as far as open framed reels... In some cases distance loss isn't much in others it is.. Just a function of design

nice downgrade