How to cut a glass bottle - MUST WATCH !!!
Тәжірибелік нұсқаулар және стиль
Playlist for all 8 video series
• How to cut a glass bottle
---------------------------------------------------------------------------
Below is the list of items you will need to do this
1- Flexible ruler
2- Electric tape
3- X-Acto knife
4- Dremel rotary tool
5- Solder Iron
6- Protective eye glass
7- Gloves
8- Mask
9- Sandpaper
10- Marker
11- Diamond disk for your Dremel rotary tool
Music ---------------------------------------------------------------
Jingle Spirit is licensed under Darren Goodman License.
www.glassexperience.com/blown...
/ darrengoodmanglass
Music provided by Darren Goodman
Performer ---------------------------------------------------------------
Music by: Darren Goodman
E-mail: info@darrengoodman.net
www.glassexperience.com/blown...
/ darrengoodmanglass
Пікірлер: 138
This technique may look a total waste of time to a lot of people because they want the bottle finished as fast as possible. Whats the point of making a bottle every 5 min? Some people ask "Ok, so you cut it, now what you do with it? It is not about what I do with it after i cut it but what I achieved doing it. What you are doing here is called "Meditation". It is a total state of concentration, a training for the mind and soul, thinking about nothing but only what you are doing now. It's to find peace for yourself, and we need that these days (during pandemic). It's to tell yourself, I know it will be a very journey and I will be spending lot of time doing & learning this and there will be many many failure to experience. I will break many many bottles, I will get mad, I will be very angry, I will be disappointed, but no matter what happens, I WILL NEVER GIVE UP cause I know someday I will look at something so beautiful that I created and it is priceless to me. I will never sell it cause it's all about me and my abilities and every time i look at it, it will remind me of me and I am proud of me. People also ask "why I am not wearing any gloves"... You won't be needing gloves when you reach that level of concentration and experience. I am a professional glass cutter and I know how to touch glass. The note I have in the beginning of my video is for those who never worked with glass. It is a note to beginners to prevent accidents and injuries so please wear gloves, eye protection and a good dust mask if you are a beginner and never worked with glass. Now a note for Professionals: Wearing gloves while cutting a bottle is like asking a blind man to wear gloves when touching objects. You just disconnected him/her from his/her surrounding world. You need to feel the bottle. I should remind you again, This is NOT a technique to cut a bottle and waist some time. Don't do this if your think "OK, I did it now what I do with it?" Do it to remind yourself of your abilities every time you look at it. When I look at my collection of bottles, each bottle has a story to remind me of, "You cut me and made me do the spiral dance for you" - "you cut me but I couldn't cut you". Thank you for watching and subscribing. Below is the list of other videos by me kzread.info/head/PLITa8BK1v-CoT0ANVO7IIRELnmohpgiwJ 🙏
Great work. I do cut the glass bottles but never thought glass can be cut this way too. I will definitely try. Thank you for inspiring me.
@CutterMasterArt
3 жыл бұрын
🙏
Beautifully done ❤️
@CutterMasterArt
Жыл бұрын
Thank you 😊
Congratulations for the amazing work! So beautiful!!!!
@CutterMasterArt
3 жыл бұрын
Thank you so much!!
wow! just incredible! more please!
@CutterMasterArt
3 жыл бұрын
You are very welcome :) I will send you the link when I make a video - Have a great day 🙏
Fantastic! Lovely work in every way👍
@CutterMasterArt
3 жыл бұрын
Thank you very much! 🙏
Beautiful work.
@CutterMasterArt
3 жыл бұрын
Thank you very much! 🙏
this is very nice, using the diamond dipped cutting disk is so smart!
@CutterMasterArt
3 жыл бұрын
Thank you! 😊
Absolutely outstanding job!
@CutterMasterArt
3 жыл бұрын
Thank you very much! 🙂🙏
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is a list of my other videos kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
Amazing! That's a lot of hard work and thinking out of the box work...
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is a list of my other videos kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
Again absolutely beautiful piece ❤️ 👍
@CutterMasterArt
3 жыл бұрын
Thanks again! 🙏
You are truly a master craftsman. Although it looks simple, needs lot of skill and patience to create such a wonder.
@CutterMasterArt
3 жыл бұрын
Lots of respect for you 🙏
A+++ I'am enjoying these videos mate.
@CutterMasterArt
3 жыл бұрын
Glad to hear it! :)
Hi friends greetings from Bali Indonesia I have watched all of your videos and it is so amazing that you cut the bottles I am in awe of you......
@CutterMasterArt
3 жыл бұрын
Thanks and welcome
@CutterMasterArt
3 жыл бұрын
CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html
@Potongbotol
3 жыл бұрын
@@CutterMasterArt I immediately visited all your channels and was successful for you
Você é um verdadeiro artista parabéns
@CutterMasterArt
3 жыл бұрын
Muito obrigado. Muito respeito 🙏
Sin palabras, UNAS BELLEZAS. Saludos desde Costa Rica. 🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷
@CutterMasterArt
3 жыл бұрын
Gracias. Te lo agradezco
✨😍 beautiful art... 👌👍
@CutterMasterArt
3 жыл бұрын
Thank you so much 😀
Вы молодец, отличное видео 👍👍👍🤝🤝🤝
@CutterMasterArt
3 жыл бұрын
Большое спасибо. Большое уважение к тебе. Ниже список моих других видео kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
Impressive.....👏👏👏👍
@CutterMasterArt
3 жыл бұрын
Thank you! Cheers!
😊 congratulations👏 Iam so impressed. Background music🎶 super.
@CutterMasterArt
3 жыл бұрын
Glad you like it My other videos 🙏 kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html
New channel with new talent🎉👍👍 amazing skills 👌
@CutterMasterArt
3 жыл бұрын
Thank you so much 😊
Amazing job. 👌👌👌👌👌✋👌
@CutterMasterArt
3 жыл бұрын
Thank you so much
Oregon USA here💙very nice piece..both b4 and after transition...🤞🤞🤞 the whole time..kudos to you for ur creative spin on it...but lets not 4get the sculpture Goodman, who gave birth to this unique art👍💜👍 y'all rock💯
@pdxwildchildroberts5586
3 жыл бұрын
..and where do I get that green tape ❓...lol
@CutterMasterArt
3 жыл бұрын
The whole secret lies on that green tape. Has to be Green... It just has to be
@CutterMasterArt
3 жыл бұрын
Thank you so much!
@pdxwildchildroberts5586
3 жыл бұрын
@@CutterMasterArt but seriously..where do I get it❓brand ❓
@CutterMasterArt
3 жыл бұрын
@@pdxwildchildroberts5586 any electrical tape will do. Electric tapes are flexible around curves and thats why i use them.
Beautiful creative art job...........
@CutterMasterArt
3 жыл бұрын
Many many thanks
@CutterMasterArt
3 жыл бұрын
CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html
Wooow 🤗 Nice 🔥💪
@CutterMasterArt
3 жыл бұрын
Thanks 🔥
Brilliant! I have everything needed so I gave it a go but couldn't start the initial crack. My soldering iron is butane & the tip is very small. I don't think it is hot enough. I can borrow a 60 watt soldering iron from my neighbor (when he gets home) or just go buy one. For now, my project is on hold until I can get a hotter soldering iron. In the mean time, I'll try the wet Q-tip advice you gave in another comment. I'll give an update when I advance with this project. Thank you for inspiring me!
@CutterMasterArt
3 жыл бұрын
Thank you for watching my videos 🙏
Отлично у Вас получается, я пробовал резать бутылку из под Coca Colla,только пополам, классный бокал получился.
@CutterMasterArt
3 жыл бұрын
Спасибо за комплимент. Это очень ценится. Пожалуйста, посмотрите мои другие видео ниже kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
Wow! Simply amazing.. Beautiful piece before and after.. Working with that thin top piece had to be stressful.. Using the cutwheel to score looks much easier.. I noticed him dragging the iron before the initial crack.. Is that to preheat the score line a little.. Sorry for all the questions but I am a beginner and don't know why but have been obsessed with cutting glass for the last few months.. Again thanks for sharing your amazing talents and your amazing videos..
@CutterMasterArt
3 жыл бұрын
Thank you for watching. I sent links to my videos for everyone to watch. Don’t know if you got them or not. Anyway to answer your questions. Yes, dragging along the score line about an inch back and forth helps keep the area warm and easier to start the initial crack. Sometimes I use a Q-tip and dip in into a cool glass of water when the crack is a little stubborn to start. Not too much water. As long as the Q-tip is wet and cool it will do the job. Thank you for watching and subscribing 🙏
WOW! 😮 Looks great. And cutting the glass even made it look better. I am so impressed. To me it looks like a giraffe fading into a smoke tornado and cutting the glass makes the „smoke tornado“ even more impressive. I LOVE IT. 😁 Just as a matter of interest: What did you use to color the sculpture? Did you cut all of them or photoshop the 8 additional ones? Greetings from Switzerland 🇨🇭
@CutterMasterArt
3 жыл бұрын
Yes, I made one then took photos from different views and finally PhotoShop the original into other colours. I used glass paint to colour the item
Thanks fro sharing
@CutterMasterArt
3 жыл бұрын
My pleasure
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is a list of my other videos kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
kreatif glaas,matap👍👍👍👍👍👍
@CutterMasterArt
3 жыл бұрын
Terima kasih
@CutterMasterArt
3 жыл бұрын
CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html
amazing ..... greetings and subscribe from Indonesia
@CutterMasterArt
3 жыл бұрын
🙏
Where can I buy the tools needed and what are they called? Thanks Tom
@CutterMasterArt
Жыл бұрын
Amazon site. Please see video description section
super
@CutterMasterArt
3 жыл бұрын
Thank you
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is a list of my other videos kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
It's a amazing very beautiful oh my God
@CutterMasterArt
3 жыл бұрын
Thank you
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is a list of my other videos kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
Why not going to order directly ready one ?
@CutterMasterArt
3 жыл бұрын
Sure. Below is the artist channel who created that beautiful piece. kzread.info
We're those all different colored bottles at the end or did you color the clear bottles somehow?
@CutterMasterArt
3 жыл бұрын
That is a PhotoShop Image. I only received one glass sculpture. The actual colour I used was Red. I then took a photo shot and changed the colour to what you see in that image.
@kristycannon7923
3 жыл бұрын
@@CutterMasterArt You have mad skills!🤗 BEAUTIFUL work!
@CutterMasterArt
3 жыл бұрын
🙏 Much appreciated
Красиво 👍
@CutterMasterArt
3 жыл бұрын
🙏
@CutterMasterArt
3 жыл бұрын
CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html
@user-xw6lt4eg3l
3 жыл бұрын
@@CutterMasterArt я уже все смотрел 🙂
@CutterMasterArt
3 жыл бұрын
🙏
I like the before best.
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is the list of other videos by me kzread.info/head/PLITa8BK1v-CoT0ANVO7IIRELnmohpgiwJ
wowgreat job looks amazing very unique from plastic bottle..i love it.li learn from u dear..take care and Godbless
@CutterMasterArt
3 жыл бұрын
Thank you! Godbless
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is a list of my other videos kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
Tem que internar um louco desse!!!!!😲😲😲😲👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻
@CutterMasterArt
3 жыл бұрын
🙂
where did you buy youre glass cutter?
@CutterMasterArt
3 жыл бұрын
The X-Acto knife I had. The diamond disk I purchased from Amazon site
@CryingCarrot
3 жыл бұрын
@@CutterMasterArt do you have a link to the disk?
@CutterMasterArt
3 жыл бұрын
@@CryingCarrot I can't direct you to a specific seller. Just go to Amazon website and search for "Diamond disk for dremel rotary tool"
I was waiting for the part were you will put some lighting underneath the glass
@CutterMasterArt
3 жыл бұрын
That is also a cool idea :) Thank you for watching and subscribing to my channel. Below is a list of other videos by me. kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
У меня и с обычными бутылками только с 35 раза получилось, а на такое даже смотреть страшно ))) Каким таким стеклорезом пользуетесь на первых линиях? Какой мощности паяльник? Если это паяльник.
@CutterMasterArt
3 жыл бұрын
Паяльник = 25 ватт Строчки делаю «Алмазным диском». Вы можете купить на Amazon.com
@LLI_M_R_K_A
3 жыл бұрын
Спасибо! Буду еще пробовать!
@CutterMasterArt
3 жыл бұрын
@@LLI_M_R_K_A Нет проблем
@LLI_M_R_K_A
3 жыл бұрын
@@CutterMasterArt пока еще проблема есть -- в моем опыте, пока еще мизерном)))
@CutterMasterArt
3 жыл бұрын
Что вы имеете в виду?
بہترین
@CutterMasterArt
3 жыл бұрын
متشکرم
@CutterMasterArt
3 жыл бұрын
videos kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html 🙏
Oh god! What kind of this glass🤓
@CutterMasterArt
3 жыл бұрын
you like it?
@creativearttv1384
3 жыл бұрын
@@CutterMasterArt yes, it’s look so amazing 🤗
@CutterMasterArt
3 жыл бұрын
Below is the list of videos I have made so far. Take a look kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏
Classy and beautiful indeed but, THAT can also be used as a weapon if you get robbed. ☺️☺️☺️☺️🔪
@CutterMasterArt
3 жыл бұрын
🙂
@patricecipher6457
3 жыл бұрын
@@CutterMasterArt 😁
Two thumb up to sir great video... I wish i could do it.am really whant to try it the problem is i don't have a tools or equipment to use...
@CutterMasterArt
3 жыл бұрын
Buy the items bit by bit - all you really need is a soldering iron 25 watt :)
@CutterMasterArt
3 жыл бұрын
@ENG true
@CutterMasterArt
3 жыл бұрын
Thank you for watching and subscribing. Below is a list of my other videos kzread.info/dash/bejne/o2ZlssmpqcbHkrg.html kzread.info/dash/bejne/dpmXucFpf5iunto.html kzread.info/dash/bejne/dmWDxqmRidTfdZc.html kzread.info/dash/bejne/ZI2drs-lo9eugag.html 🙏